mirror of https://github.com/Desuuuu/klipper.git
117 lines
5.1 KiB
Python
117 lines
5.1 KiB
Python
# Helper script to adjust bed screws
|
|
#
|
|
# Copyright (C) 2019 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
|
|
def parse_coord(config, param):
|
|
pair = config.get(param).strip().split(',', 1)
|
|
try:
|
|
return (float(pair[0]), float(pair[1]))
|
|
except:
|
|
raise config.error("%s:%s needs to be an x,y coordinate" % (
|
|
config.get_name(), param))
|
|
|
|
class BedScrews:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.state = None
|
|
self.current_screw = 0
|
|
self.accepted_screws = 0
|
|
self.number_of_screws = 0
|
|
# Read config
|
|
screws = []
|
|
fine_adjust = []
|
|
for i in range(99):
|
|
prefix = "screw%d" % (i + 1,)
|
|
if config.get(prefix, None) is None:
|
|
break
|
|
screw_coord = parse_coord(config, prefix)
|
|
screw_name = "screw at %.3f,%.3f" % screw_coord
|
|
screw_name = config.get(prefix + "_name", screw_name)
|
|
screws.append((screw_coord, screw_name))
|
|
if config.get(prefix + "_fine_adjust", None) is not None:
|
|
fine_coord = parse_coord(config, prefix + "_fine_adjust")
|
|
fine_adjust.append((fine_coord, screw_name))
|
|
if len(screws) < 3:
|
|
raise config.error("bed_screws: Must have at least three screws")
|
|
self.number_of_screws = len(screws)
|
|
self.states = {'adjust': screws, 'fine': fine_adjust}
|
|
self.speed = config.getfloat('speed', 50., above=0.)
|
|
self.lift_speed = config.getfloat('probe_speed', 5., above=0.)
|
|
self.horizontal_move_z = config.getfloat('horizontal_move_z', 5.)
|
|
self.probe_z = config.getfloat('probe_height', 0.)
|
|
# Register command
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command("BED_SCREWS_ADJUST",
|
|
self.cmd_BED_SCREWS_ADJUST,
|
|
desc=self.cmd_BED_SCREWS_ADJUST_help)
|
|
def move(self, coord, speed):
|
|
self.printer.lookup_object('toolhead').manual_move(coord, speed)
|
|
def move_to_screw(self, state, screw):
|
|
# Move up, over, and then down
|
|
self.move((None, None, self.horizontal_move_z), self.lift_speed)
|
|
coord, name = self.states[state][screw]
|
|
self.move((coord[0], coord[1], self.horizontal_move_z), self.speed)
|
|
self.move((coord[0], coord[1], self.probe_z), self.lift_speed)
|
|
# Update state
|
|
self.state = state
|
|
self.current_screw = screw
|
|
# Register commands
|
|
self.gcode.respond_info(
|
|
"Adjust %s. Then run ACCEPT, ADJUSTED, or ABORT\n"
|
|
"Use ADJUSTED if a significant screw adjustment is made" % (name,))
|
|
self.gcode.register_command('ACCEPT', self.cmd_ACCEPT,
|
|
desc=self.cmd_ACCEPT_help)
|
|
self.gcode.register_command('ADJUSTED', self.cmd_ADJUSTED,
|
|
desc=self.cmd_ADJUSTED_help)
|
|
self.gcode.register_command('ABORT', self.cmd_ABORT,
|
|
desc=self.cmd_ABORT_help)
|
|
def unregister_commands(self):
|
|
self.gcode.register_command('ACCEPT', None)
|
|
self.gcode.register_command('ADJUSTED', None)
|
|
self.gcode.register_command('ABORT', None)
|
|
cmd_BED_SCREWS_ADJUST_help = "Tool to help adjust bed leveling screws"
|
|
def cmd_BED_SCREWS_ADJUST(self, gcmd):
|
|
if self.state is not None:
|
|
raise gcmd.error("Already in bed_screws helper; use ABORT to exit")
|
|
# reset accepted screws
|
|
self.accepted_screws = 0
|
|
self.move((None, None, self.horizontal_move_z), self.speed)
|
|
self.move_to_screw('adjust', 0)
|
|
cmd_ACCEPT_help = "Accept bed screw position"
|
|
def cmd_ACCEPT(self, gcmd):
|
|
self.unregister_commands()
|
|
self.accepted_screws = self.accepted_screws + 1
|
|
if self.current_screw + 1 < len(self.states[self.state]) \
|
|
and self.accepted_screws < self.number_of_screws:
|
|
# Continue with next screw
|
|
self.move_to_screw(self.state, self.current_screw + 1)
|
|
return
|
|
if self.accepted_screws < self.number_of_screws:
|
|
# Retry coarse adjustments
|
|
self.move_to_screw('adjust', 0)
|
|
return
|
|
if self.state == 'adjust' and self.states['fine']:
|
|
# Reset accepted screws for fine adjustment
|
|
self.accepted_screws = 0
|
|
# Perform fine screw adjustments
|
|
self.move_to_screw('fine', 0)
|
|
return
|
|
# Done
|
|
self.state = None
|
|
self.move((None, None, self.horizontal_move_z), self.lift_speed)
|
|
gcmd.respond_info("Bed screws tool completed successfully")
|
|
cmd_ADJUSTED_help = "Accept bed screw position after notable adjustment"
|
|
def cmd_ADJUSTED(self, gcmd):
|
|
self.unregister_commands()
|
|
self.accepted_screws = -1
|
|
self.cmd_ACCEPT(gcmd)
|
|
cmd_ABORT_help = "Abort bed screws tool"
|
|
def cmd_ABORT(self, gcmd):
|
|
self.unregister_commands()
|
|
self.state = None
|
|
|
|
def load_config(config):
|
|
return BedScrews(config)
|