mirror of https://github.com/Desuuuu/klipper.git
1923 lines
64 KiB
C
1923 lines
64 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_ll_spi.h
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief Header file of SPI LL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_LL_SPI_H
|
|
#define __STM32F1xx_LL_SPI_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx.h"
|
|
|
|
/** @addtogroup STM32F1xx_LL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#if defined (SPI1) || defined (SPI2) || defined (SPI3)
|
|
|
|
/** @defgroup SPI_LL SPI
|
|
* @{
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief SPI Init structures definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode.
|
|
This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/
|
|
|
|
uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave).
|
|
This parameter can be a value of @ref SPI_LL_EC_MODE.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/
|
|
|
|
uint32_t DataWidth; /*!< Specifies the SPI data width.
|
|
This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/
|
|
|
|
uint32_t ClockPolarity; /*!< Specifies the serial clock steady state.
|
|
This parameter can be a value of @ref SPI_LL_EC_POLARITY.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/
|
|
|
|
uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture.
|
|
This parameter can be a value of @ref SPI_LL_EC_PHASE.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/
|
|
|
|
uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit.
|
|
This parameter can be a value of @ref SPI_LL_EC_NSS_MODE.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/
|
|
|
|
uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock.
|
|
This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER.
|
|
@note The communication clock is derived from the master clock. The slave clock does not need to be set.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/
|
|
|
|
uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit.
|
|
This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/
|
|
|
|
uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
|
|
This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION.
|
|
|
|
This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/
|
|
|
|
uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation.
|
|
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF.
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/
|
|
|
|
} LL_SPI_InitTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines
|
|
* @brief Flags defines which can be used with LL_SPI_ReadReg function
|
|
* @{
|
|
*/
|
|
#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */
|
|
#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */
|
|
#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */
|
|
#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */
|
|
#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */
|
|
#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */
|
|
#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_IT IT Defines
|
|
* @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions
|
|
* @{
|
|
*/
|
|
#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */
|
|
#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */
|
|
#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_MODE Operation Mode
|
|
* @{
|
|
*/
|
|
#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */
|
|
#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup SPI_LL_EC_PHASE Clock Phase
|
|
* @{
|
|
*/
|
|
#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */
|
|
#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_POLARITY Clock Polarity
|
|
* @{
|
|
*/
|
|
#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */
|
|
#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler
|
|
* @{
|
|
*/
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */
|
|
#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order
|
|
* @{
|
|
*/
|
|
#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */
|
|
#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode
|
|
* @{
|
|
*/
|
|
#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */
|
|
#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */
|
|
#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */
|
|
#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode
|
|
* @{
|
|
*/
|
|
#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */
|
|
#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */
|
|
#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth
|
|
* @{
|
|
*/
|
|
#define LL_SPI_DATAWIDTH_8BIT 0x00000000U /*!< Data length for SPI transfer: 8 bits */
|
|
#define LL_SPI_DATAWIDTH_16BIT (SPI_CR1_DFF) /*!< Data length for SPI transfer: 16 bits */
|
|
/**
|
|
* @}
|
|
*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
|
|
/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation
|
|
* @{
|
|
*/
|
|
#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */
|
|
#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Write a value in SPI register
|
|
* @param __INSTANCE__ SPI Instance
|
|
* @param __REG__ Register to be written
|
|
* @param __VALUE__ Value to be written in the register
|
|
* @retval None
|
|
*/
|
|
#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
|
|
|
/**
|
|
* @brief Read a value in SPI register
|
|
* @param __INSTANCE__ SPI Instance
|
|
* @param __REG__ Register to be read
|
|
* @retval Register value
|
|
*/
|
|
#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_Configuration Configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable SPI peripheral
|
|
* @rmtoll CR1 SPE LL_SPI_Enable
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR1, SPI_CR1_SPE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable SPI peripheral
|
|
* @note When disabling the SPI, follow the procedure described in the Reference Manual.
|
|
* @rmtoll CR1 SPE LL_SPI_Disable
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if SPI peripheral is enabled
|
|
* @rmtoll CR1 SPE LL_SPI_IsEnabled
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE));
|
|
}
|
|
|
|
/**
|
|
* @brief Set SPI operation mode to Master or Slave
|
|
* @note This bit should not be changed when communication is ongoing.
|
|
* @rmtoll CR1 MSTR LL_SPI_SetMode\n
|
|
* CR1 SSI LL_SPI_SetMode
|
|
* @param SPIx SPI Instance
|
|
* @param Mode This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_MODE_MASTER
|
|
* @arg @ref LL_SPI_MODE_SLAVE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode);
|
|
}
|
|
|
|
/**
|
|
* @brief Get SPI operation mode (Master or Slave)
|
|
* @rmtoll CR1 MSTR LL_SPI_GetMode\n
|
|
* CR1 SSI LL_SPI_GetMode
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_MODE_MASTER
|
|
* @arg @ref LL_SPI_MODE_SLAVE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Set clock phase
|
|
* @note This bit should not be changed when communication is ongoing.
|
|
* This bit is not used in SPI TI mode.
|
|
* @rmtoll CR1 CPHA LL_SPI_SetClockPhase
|
|
* @param SPIx SPI Instance
|
|
* @param ClockPhase This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_PHASE_1EDGE
|
|
* @arg @ref LL_SPI_PHASE_2EDGE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase);
|
|
}
|
|
|
|
/**
|
|
* @brief Get clock phase
|
|
* @rmtoll CR1 CPHA LL_SPI_GetClockPhase
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_PHASE_1EDGE
|
|
* @arg @ref LL_SPI_PHASE_2EDGE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA));
|
|
}
|
|
|
|
/**
|
|
* @brief Set clock polarity
|
|
* @note This bit should not be changed when communication is ongoing.
|
|
* This bit is not used in SPI TI mode.
|
|
* @rmtoll CR1 CPOL LL_SPI_SetClockPolarity
|
|
* @param SPIx SPI Instance
|
|
* @param ClockPolarity This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_POLARITY_LOW
|
|
* @arg @ref LL_SPI_POLARITY_HIGH
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity);
|
|
}
|
|
|
|
/**
|
|
* @brief Get clock polarity
|
|
* @rmtoll CR1 CPOL LL_SPI_GetClockPolarity
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_POLARITY_LOW
|
|
* @arg @ref LL_SPI_POLARITY_HIGH
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL));
|
|
}
|
|
|
|
/**
|
|
* @brief Set baud rate prescaler
|
|
* @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler.
|
|
* @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler
|
|
* @param SPIx SPI Instance
|
|
* @param BaudRate This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate);
|
|
}
|
|
|
|
/**
|
|
* @brief Get baud rate prescaler
|
|
* @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128
|
|
* @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR));
|
|
}
|
|
|
|
/**
|
|
* @brief Set transfer bit order
|
|
* @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode.
|
|
* @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder
|
|
* @param SPIx SPI Instance
|
|
* @param BitOrder This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_LSB_FIRST
|
|
* @arg @ref LL_SPI_MSB_FIRST
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder);
|
|
}
|
|
|
|
/**
|
|
* @brief Get transfer bit order
|
|
* @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_LSB_FIRST
|
|
* @arg @ref LL_SPI_MSB_FIRST
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST));
|
|
}
|
|
|
|
/**
|
|
* @brief Set transfer direction mode
|
|
* @note For Half-Duplex mode, Rx Direction is set by default.
|
|
* In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex.
|
|
* @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n
|
|
* CR1 BIDIMODE LL_SPI_SetTransferDirection\n
|
|
* CR1 BIDIOE LL_SPI_SetTransferDirection
|
|
* @param SPIx SPI Instance
|
|
* @param TransferDirection This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_FULL_DUPLEX
|
|
* @arg @ref LL_SPI_SIMPLEX_RX
|
|
* @arg @ref LL_SPI_HALF_DUPLEX_RX
|
|
* @arg @ref LL_SPI_HALF_DUPLEX_TX
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection);
|
|
}
|
|
|
|
/**
|
|
* @brief Get transfer direction mode
|
|
* @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n
|
|
* CR1 BIDIMODE LL_SPI_GetTransferDirection\n
|
|
* CR1 BIDIOE LL_SPI_GetTransferDirection
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_FULL_DUPLEX
|
|
* @arg @ref LL_SPI_SIMPLEX_RX
|
|
* @arg @ref LL_SPI_HALF_DUPLEX_RX
|
|
* @arg @ref LL_SPI_HALF_DUPLEX_TX
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE));
|
|
}
|
|
|
|
/**
|
|
* @brief Set frame data width
|
|
* @rmtoll CR1 DFF LL_SPI_SetDataWidth
|
|
* @param SPIx SPI Instance
|
|
* @param DataWidth This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_DATAWIDTH_8BIT
|
|
* @arg @ref LL_SPI_DATAWIDTH_16BIT
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_DFF, DataWidth);
|
|
}
|
|
|
|
/**
|
|
* @brief Get frame data width
|
|
* @rmtoll CR1 DFF LL_SPI_GetDataWidth
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_DATAWIDTH_8BIT
|
|
* @arg @ref LL_SPI_DATAWIDTH_16BIT
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_DFF));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_CRC_Management CRC Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable CRC
|
|
* @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
|
|
* @rmtoll CR1 CRCEN LL_SPI_EnableCRC
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR1, SPI_CR1_CRCEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable CRC
|
|
* @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
|
|
* @rmtoll CR1 CRCEN LL_SPI_DisableCRC
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if CRC is enabled
|
|
* @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
|
|
* @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN));
|
|
}
|
|
|
|
/**
|
|
* @brief Set CRCNext to transfer CRC on the line
|
|
* @note This bit has to be written as soon as the last data is written in the SPIx_DR register.
|
|
* @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT);
|
|
}
|
|
|
|
/**
|
|
* @brief Set polynomial for CRC calculation
|
|
* @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial
|
|
* @param SPIx SPI Instance
|
|
* @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly)
|
|
{
|
|
WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly);
|
|
}
|
|
|
|
/**
|
|
* @brief Get polynomial for CRC calculation
|
|
* @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_REG(SPIx->CRCPR));
|
|
}
|
|
|
|
/**
|
|
* @brief Get Rx CRC
|
|
* @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_REG(SPIx->RXCRCR));
|
|
}
|
|
|
|
/**
|
|
* @brief Get Tx CRC
|
|
* @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_REG(SPIx->TXCRCR));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Set NSS mode
|
|
* @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode.
|
|
* @rmtoll CR1 SSM LL_SPI_SetNSSMode\n
|
|
* @rmtoll CR2 SSOE LL_SPI_SetNSSMode
|
|
* @param SPIx SPI Instance
|
|
* @param NSS This parameter can be one of the following values:
|
|
* @arg @ref LL_SPI_NSS_SOFT
|
|
* @arg @ref LL_SPI_NSS_HARD_INPUT
|
|
* @arg @ref LL_SPI_NSS_HARD_OUTPUT
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS)
|
|
{
|
|
MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS);
|
|
MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U)));
|
|
}
|
|
|
|
/**
|
|
* @brief Get NSS mode
|
|
* @rmtoll CR1 SSM LL_SPI_GetNSSMode\n
|
|
* @rmtoll CR2 SSOE LL_SPI_GetNSSMode
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_SPI_NSS_SOFT
|
|
* @arg @ref LL_SPI_NSS_HARD_INPUT
|
|
* @arg @ref LL_SPI_NSS_HARD_OUTPUT
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx)
|
|
{
|
|
register uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM));
|
|
register uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U);
|
|
return (Ssm | Ssoe);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Check if Rx buffer is not empty
|
|
* @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Tx buffer is empty
|
|
* @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE));
|
|
}
|
|
|
|
/**
|
|
* @brief Get CRC error flag
|
|
* @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR));
|
|
}
|
|
|
|
/**
|
|
* @brief Get mode fault error flag
|
|
* @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF));
|
|
}
|
|
|
|
/**
|
|
* @brief Get overrun error flag
|
|
* @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR));
|
|
}
|
|
|
|
/**
|
|
* @brief Get busy flag
|
|
* @note The BSY flag is cleared under any one of the following conditions:
|
|
* -When the SPI is correctly disabled
|
|
* -When a fault is detected in Master mode (MODF bit set to 1)
|
|
* -In Master mode, when it finishes a data transmission and no new data is ready to be
|
|
* sent
|
|
* -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between
|
|
* each data transfer.
|
|
* @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Clear CRC error flag
|
|
* @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear mode fault error flag
|
|
* @note Clearing this flag is done by a read access to the SPIx_SR
|
|
* register followed by a write access to the SPIx_CR1 register
|
|
* @rmtoll SR MODF LL_SPI_ClearFlag_MODF
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx)
|
|
{
|
|
__IO uint32_t tmpreg;
|
|
tmpreg = SPIx->SR;
|
|
(void) tmpreg;
|
|
tmpreg = CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE);
|
|
(void) tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Clear overrun error flag
|
|
* @note Clearing this flag is done by a read access to the SPIx_DR
|
|
* register followed by a read access to the SPIx_SR register
|
|
* @rmtoll SR OVR LL_SPI_ClearFlag_OVR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx)
|
|
{
|
|
__IO uint32_t tmpreg;
|
|
tmpreg = SPIx->DR;
|
|
(void) tmpreg;
|
|
tmpreg = SPIx->SR;
|
|
(void) tmpreg;
|
|
}
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_IT_Management Interrupt Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable error interrupt
|
|
* @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode).
|
|
* @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR2, SPI_CR2_ERRIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Rx buffer not empty interrupt
|
|
* @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Tx buffer empty interrupt
|
|
* @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR2, SPI_CR2_TXEIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable error interrupt
|
|
* @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode).
|
|
* @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Rx buffer not empty interrupt
|
|
* @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Tx buffer empty interrupt
|
|
* @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if error interrupt is enabled
|
|
* @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Rx buffer not empty interrupt is enabled
|
|
* @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Tx buffer empty interrupt
|
|
* @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_DMA_Management DMA Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable DMA Rx
|
|
* @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DMA Rx
|
|
* @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if DMA Rx is enabled
|
|
* @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN));
|
|
}
|
|
|
|
/**
|
|
* @brief Enable DMA Tx
|
|
* @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DMA Tx
|
|
* @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if DMA Tx is enabled
|
|
* @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN));
|
|
}
|
|
|
|
/**
|
|
* @brief Get the data register address used for DMA transfer
|
|
* @rmtoll DR DR LL_SPI_DMA_GetRegAddr
|
|
* @param SPIx SPI Instance
|
|
* @retval Address of data register
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t) & (SPIx->DR);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EF_DATA_Management DATA Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Read 8-Bits in the data register
|
|
* @rmtoll DR DR LL_SPI_ReceiveData8
|
|
* @param SPIx SPI Instance
|
|
* @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF
|
|
*/
|
|
__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint8_t)(READ_REG(SPIx->DR));
|
|
}
|
|
|
|
/**
|
|
* @brief Read 16-Bits in the data register
|
|
* @rmtoll DR DR LL_SPI_ReceiveData16
|
|
* @param SPIx SPI Instance
|
|
* @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF
|
|
*/
|
|
__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint16_t)(READ_REG(SPIx->DR));
|
|
}
|
|
|
|
/**
|
|
* @brief Write 8-Bits in the data register
|
|
* @rmtoll DR DR LL_SPI_TransmitData8
|
|
* @param SPIx SPI Instance
|
|
* @param TxData Value between Min_Data=0x00 and Max_Data=0xFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData)
|
|
{
|
|
SPIx->DR = TxData;
|
|
}
|
|
|
|
/**
|
|
* @brief Write 16-Bits in the data register
|
|
* @rmtoll DR DR LL_SPI_TransmitData16
|
|
* @param SPIx SPI Instance
|
|
* @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData)
|
|
{
|
|
SPIx->DR = TxData;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
|
|
ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx);
|
|
ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct);
|
|
void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(SPI_I2S_SUPPORT)
|
|
/** @defgroup I2S_LL I2S
|
|
* @{
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief I2S Init structure definition
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
uint32_t Mode; /*!< Specifies the I2S operating mode.
|
|
This parameter can be a value of @ref I2S_LL_EC_MODE
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/
|
|
|
|
uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
|
|
This parameter can be a value of @ref I2S_LL_EC_STANDARD
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/
|
|
|
|
|
|
uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
|
|
This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/
|
|
|
|
|
|
uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
|
|
This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT
|
|
|
|
This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/
|
|
|
|
|
|
uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
|
|
This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ
|
|
|
|
Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity
|
|
and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/
|
|
|
|
|
|
uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock.
|
|
This parameter can be a value of @ref I2S_LL_EC_POLARITY
|
|
|
|
This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/
|
|
|
|
} LL_I2S_InitTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /*USE_FULL_LL_DRIVER*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines
|
|
* @brief Flags defines which can be used with LL_I2S_ReadReg function
|
|
* @{
|
|
*/
|
|
#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */
|
|
#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */
|
|
#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */
|
|
#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */
|
|
#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */
|
|
#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_LL_EC_IT IT Defines
|
|
* @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions
|
|
* @{
|
|
*/
|
|
#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */
|
|
#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */
|
|
#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_DATA_FORMAT Data format
|
|
* @{
|
|
*/
|
|
#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel lenght 16bit */
|
|
#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel lenght 32bit */
|
|
#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel lenght 32bit */
|
|
#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel lenght 32bit */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_POLARITY Clock Polarity
|
|
* @{
|
|
*/
|
|
#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */
|
|
#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_STANDARD I2s Standard
|
|
* @{
|
|
*/
|
|
#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */
|
|
#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */
|
|
#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */
|
|
#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */
|
|
#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_MODE Operation Mode
|
|
* @{
|
|
*/
|
|
#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */
|
|
#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */
|
|
#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */
|
|
#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor
|
|
* @{
|
|
*/
|
|
#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */
|
|
#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
|
|
/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output
|
|
* @{
|
|
*/
|
|
#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */
|
|
#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency
|
|
* @{
|
|
*/
|
|
|
|
#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */
|
|
#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */
|
|
#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */
|
|
#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */
|
|
#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */
|
|
#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */
|
|
#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */
|
|
#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */
|
|
#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */
|
|
#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Write a value in I2S register
|
|
* @param __INSTANCE__ I2S Instance
|
|
* @param __REG__ Register to be written
|
|
* @param __VALUE__ Value to be written in the register
|
|
* @retval None
|
|
*/
|
|
#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
|
|
|
/**
|
|
* @brief Read a value in I2S register
|
|
* @param __INSTANCE__ I2S Instance
|
|
* @param __REG__ Register to be read
|
|
* @retval Register value
|
|
*/
|
|
#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EF_Configuration Configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Select I2S mode and Enable I2S peripheral
|
|
* @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n
|
|
* I2SCFGR I2SE LL_I2S_Enable
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable I2S peripheral
|
|
* @rmtoll I2SCFGR I2SE LL_I2S_Disable
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if I2S peripheral is enabled
|
|
* @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE));
|
|
}
|
|
|
|
/**
|
|
* @brief Set I2S data frame length
|
|
* @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n
|
|
* I2SCFGR CHLEN LL_I2S_SetDataFormat
|
|
* @param SPIx SPI Instance
|
|
* @param DataFormat This parameter can be one of the following values:
|
|
* @arg @ref LL_I2S_DATAFORMAT_16B
|
|
* @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED
|
|
* @arg @ref LL_I2S_DATAFORMAT_24B
|
|
* @arg @ref LL_I2S_DATAFORMAT_32B
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat)
|
|
{
|
|
MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2S data frame length
|
|
* @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n
|
|
* I2SCFGR CHLEN LL_I2S_GetDataFormat
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_I2S_DATAFORMAT_16B
|
|
* @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED
|
|
* @arg @ref LL_I2S_DATAFORMAT_24B
|
|
* @arg @ref LL_I2S_DATAFORMAT_32B
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN));
|
|
}
|
|
|
|
/**
|
|
* @brief Set I2S clock polarity
|
|
* @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity
|
|
* @param SPIx SPI Instance
|
|
* @param ClockPolarity This parameter can be one of the following values:
|
|
* @arg @ref LL_I2S_POLARITY_LOW
|
|
* @arg @ref LL_I2S_POLARITY_HIGH
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity)
|
|
{
|
|
SET_BIT(SPIx->I2SCFGR, ClockPolarity);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2S clock polarity
|
|
* @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_I2S_POLARITY_LOW
|
|
* @arg @ref LL_I2S_POLARITY_HIGH
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL));
|
|
}
|
|
|
|
/**
|
|
* @brief Set I2S standard protocol
|
|
* @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n
|
|
* I2SCFGR PCMSYNC LL_I2S_SetStandard
|
|
* @param SPIx SPI Instance
|
|
* @param Standard This parameter can be one of the following values:
|
|
* @arg @ref LL_I2S_STANDARD_PHILIPS
|
|
* @arg @ref LL_I2S_STANDARD_MSB
|
|
* @arg @ref LL_I2S_STANDARD_LSB
|
|
* @arg @ref LL_I2S_STANDARD_PCM_SHORT
|
|
* @arg @ref LL_I2S_STANDARD_PCM_LONG
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard)
|
|
{
|
|
MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2S standard protocol
|
|
* @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n
|
|
* I2SCFGR PCMSYNC LL_I2S_GetStandard
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_I2S_STANDARD_PHILIPS
|
|
* @arg @ref LL_I2S_STANDARD_MSB
|
|
* @arg @ref LL_I2S_STANDARD_LSB
|
|
* @arg @ref LL_I2S_STANDARD_PCM_SHORT
|
|
* @arg @ref LL_I2S_STANDARD_PCM_LONG
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC));
|
|
}
|
|
|
|
/**
|
|
* @brief Set I2S transfer mode
|
|
* @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode
|
|
* @param SPIx SPI Instance
|
|
* @param Mode This parameter can be one of the following values:
|
|
* @arg @ref LL_I2S_MODE_SLAVE_TX
|
|
* @arg @ref LL_I2S_MODE_SLAVE_RX
|
|
* @arg @ref LL_I2S_MODE_MASTER_TX
|
|
* @arg @ref LL_I2S_MODE_MASTER_RX
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode)
|
|
{
|
|
MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2S transfer mode
|
|
* @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_I2S_MODE_SLAVE_TX
|
|
* @arg @ref LL_I2S_MODE_SLAVE_RX
|
|
* @arg @ref LL_I2S_MODE_MASTER_TX
|
|
* @arg @ref LL_I2S_MODE_MASTER_RX
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG));
|
|
}
|
|
|
|
/**
|
|
* @brief Set I2S linear prescaler
|
|
* @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear
|
|
* @param SPIx SPI Instance
|
|
* @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear)
|
|
{
|
|
MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2S linear prescaler
|
|
* @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear
|
|
* @param SPIx SPI Instance
|
|
* @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV));
|
|
}
|
|
|
|
/**
|
|
* @brief Set I2S parity prescaler
|
|
* @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity
|
|
* @param SPIx SPI Instance
|
|
* @param PrescalerParity This parameter can be one of the following values:
|
|
* @arg @ref LL_I2S_PRESCALER_PARITY_EVEN
|
|
* @arg @ref LL_I2S_PRESCALER_PARITY_ODD
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity)
|
|
{
|
|
MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2S parity prescaler
|
|
* @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity
|
|
* @param SPIx SPI Instance
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_I2S_PRESCALER_PARITY_EVEN
|
|
* @arg @ref LL_I2S_PRESCALER_PARITY_ODD
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable the master clock ouput (Pin MCK)
|
|
* @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx)
|
|
{
|
|
SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable the master clock ouput (Pin MCK)
|
|
* @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx)
|
|
{
|
|
CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if the master clock ouput (Pin MCK) is enabled
|
|
* @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EF_FLAG FLAG Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Check if Rx buffer is not empty
|
|
* @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsActiveFlag_RXNE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Tx buffer is empty
|
|
* @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsActiveFlag_TXE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Get busy flag
|
|
* @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsActiveFlag_BSY(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Get overrun error flag
|
|
* @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsActiveFlag_OVR(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Get underrun error flag
|
|
* @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR));
|
|
}
|
|
|
|
/**
|
|
* @brief Get channel side flag.
|
|
* @note 0: Channel Left has to be transmitted or has been received\n
|
|
* 1: Channel Right has to be transmitted or has been received\n
|
|
* It has no significance in PCM mode.
|
|
* @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx)
|
|
{
|
|
return (READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE));
|
|
}
|
|
|
|
/**
|
|
* @brief Clear overrun error flag
|
|
* @rmtoll SR OVR LL_I2S_ClearFlag_OVR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_ClearFlag_OVR(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear underrun error flag
|
|
* @rmtoll SR UDR LL_I2S_ClearFlag_UDR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx)
|
|
{
|
|
__IO uint32_t tmpreg;
|
|
tmpreg = SPIx->SR;
|
|
(void)tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EF_IT Interrupt Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable error IT
|
|
* @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode).
|
|
* @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_EnableIT_ERR(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Rx buffer not empty IT
|
|
* @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_EnableIT_RXNE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Tx buffer empty IT
|
|
* @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_EnableIT_TXE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable error IT
|
|
* @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode).
|
|
* @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_DisableIT_ERR(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Rx buffer not empty IT
|
|
* @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_DisableIT_RXNE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Tx buffer empty IT
|
|
* @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_DisableIT_TXE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if ERR IT is enabled
|
|
* @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsEnabledIT_ERR(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RXNE IT is enabled
|
|
* @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsEnabledIT_RXNE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if TXE IT is enabled
|
|
* @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsEnabledIT_TXE(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EF_DMA DMA Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable DMA Rx
|
|
* @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_EnableDMAReq_RX(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DMA Rx
|
|
* @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_DisableDMAReq_RX(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if DMA Rx is enabled
|
|
* @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsEnabledDMAReq_RX(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable DMA Tx
|
|
* @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_EnableDMAReq_TX(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DMA Tx
|
|
* @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX
|
|
* @param SPIx SPI Instance
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx)
|
|
{
|
|
LL_SPI_DisableDMAReq_TX(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if DMA Tx is enabled
|
|
* @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX
|
|
* @param SPIx SPI Instance
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_IsEnabledDMAReq_TX(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2S_LL_EF_DATA DATA Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Read 16-Bits in data register
|
|
* @rmtoll DR DR LL_I2S_ReceiveData16
|
|
* @param SPIx SPI Instance
|
|
* @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF
|
|
*/
|
|
__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx)
|
|
{
|
|
return LL_SPI_ReceiveData16(SPIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Write 16-Bits in data register
|
|
* @rmtoll DR DR LL_I2S_TransmitData16
|
|
* @param SPIx SPI Instance
|
|
* @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData)
|
|
{
|
|
LL_SPI_TransmitData16(SPIx, TxData);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
|
|
ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx);
|
|
ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct);
|
|
void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct);
|
|
void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* SPI_I2S_SUPPORT */
|
|
|
|
#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F1xx_LL_SPI_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|