mirror of https://github.com/Desuuuu/klipper.git
92 lines
2.5 KiB
INI
92 lines
2.5 KiB
INI
# This file provides example configuration for common "RepRap" style
|
|
# LCD displays that use EXP1/EXP2 plugs.
|
|
#
|
|
# To configure a display from this file, make sure the main
|
|
# printer.cfg file has a [board_pins] config section defining pin
|
|
# aliases for the EXP1/EXP2 plugs, find the appropriate LCD type in
|
|
# this file, and then copy-and-paste that section into printer.cfg.
|
|
#
|
|
# See the "example-extras.cfg" file for description of config parameters.
|
|
|
|
|
|
######################################################################
|
|
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
|
######################################################################
|
|
|
|
[display]
|
|
lcd_type: st7920
|
|
cs_pin: EXP1_4
|
|
sclk_pin: EXP1_5
|
|
sid_pin: EXP1_3
|
|
encoder_pins: ^EXP2_3, ^EXP2_5
|
|
click_pin: ^!EXP1_2
|
|
#kill_pin: ^!EXP2_8
|
|
|
|
[output_pin beeper]
|
|
pin: EXP1_1
|
|
|
|
|
|
######################################################################
|
|
# "RepRapDiscount 2004 Smart Controller" type displays
|
|
######################################################################
|
|
|
|
[display]
|
|
lcd_type: hd44780
|
|
rs_pin: EXP1_4
|
|
e_pin: EXP1_3
|
|
d4_pin: EXP1_5
|
|
d5_pin: EXP1_6
|
|
d6_pin: EXP1_7
|
|
d7_pin: EXP1_8
|
|
encoder_pins: ^EXP2_3, ^EXP2_5
|
|
click_pin: ^!EXP1_2
|
|
#kill_pin: ^!EXP2_8
|
|
|
|
[output_pin beeper]
|
|
pin: EXP1_1
|
|
|
|
|
|
######################################################################
|
|
# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
|
|
######################################################################
|
|
|
|
[display]
|
|
lcd_type: st7920
|
|
cs_pin: EXP1_7
|
|
sclk_pin: EXP1_6
|
|
sid_pin: EXP1_8
|
|
encoder_pins: ^EXP1_5, ^EXP1_3
|
|
click_pin: ^!EXP1_2
|
|
|
|
[output_pin beeper]
|
|
pin: EXP1_1
|
|
|
|
|
|
######################################################################
|
|
# MKS Mini 12864 LCD
|
|
######################################################################
|
|
|
|
# Make sure that the EXP1 and EXP2 are rotated correctly on the
|
|
# display board. The cutouts on the connectors should be towards the
|
|
# center of the PCB. See:
|
|
# https://reprap.org/wiki/MKS_MINI_12864#Physical_Interface
|
|
# If they are wrong, the connector housing can be pried off carefully
|
|
# with a small screwdriver and relocated the correct way.
|
|
|
|
[display]
|
|
lcd_type: uc1701
|
|
cs_pin: EXP1_6
|
|
a0_pin: EXP1_7
|
|
contrast: 40
|
|
encoder_pins: ^EXP2_3, ^EXP2_5
|
|
click_pin: ^!EXP1_2
|
|
## Some micro-controller boards may require an spi bus to be specified:
|
|
#spi_bus: spi
|
|
## Alternatively, some micro-controller boards may work with software spi:
|
|
#spi_software_miso_pin: EXP2_1
|
|
#spi_software_mosi_pin: EXP2_6
|
|
#spi_software_sclk_pin: EXP2_2
|
|
|
|
[output_pin beeper]
|
|
pin: EXP1_1
|