klipper-dgus/lib/rp2040/hardware/regs/ssi.h

810 lines
37 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/**
* Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// =============================================================================
// Register block : SSI
// Version : 1
// Bus type : apb
// Description : DW_apb_ssi has the following features:
// * APB interface Allows for easy integration into a
// DesignWare Synthesizable Components for AMBA 2
// implementation.
// * APB3 and APB4 protocol support.
// * Scalable APB data bus width Supports APB data bus widths
// of 8, 16, and 32 bits.
// * Serial-master or serial-slave operation Enables serial
// communication with serial-master or serial-slave peripheral
// devices.
// * Programmable Dual/Quad/Octal SPI support in Master Mode.
// * Dual Data Rate (DDR) and Read Data Strobe (RDS) Support -
// Enables the DW_apb_ssi master to perform operations with the
// device in DDR and RDS modes when working in Dual/Quad/Octal
// mode of operation.
// * Data Mask Support - Enables the DW_apb_ssi to selectively
// update the bytes in the device. This feature is applicable
// only in enhanced SPI modes.
// * eXecute-In-Place (XIP) support - Enables the DW_apb_ssi
// master to behave as a memory mapped I/O and fetches the data
// from the device based on the APB read request. This feature
// is applicable only in enhanced SPI modes.
// * DMA Controller Interface Enables the DW_apb_ssi to
// interface to a DMA controller over the bus using a
// handshaking interface for transfer requests.
// * Independent masking of interrupts Master collision,
// transmit FIFO overflow, transmit FIFO empty, receive FIFO
// full, receive FIFO underflow, and receive FIFO overflow
// interrupts can all be masked independently.
// * Multi-master contention detection Informs the processor
// of multiple serial-master accesses on the serial bus.
// * Bypass of meta-stability flip-flops for synchronous clocks
// When the APB clock (pclk) and the DW_apb_ssi serial clock
// (ssi_clk) are synchronous, meta-stable flip-flops are not
// used when transferring control signals across these clock
// domains.
// * Programmable delay on the sample time of the received
// serial data bit (rxd); enables programmable control of
// routing delays resulting in higher serial data-bit rates.
// * Programmable features:
// - Serial interface operation Choice of Motorola SPI, Texas
// Instruments Synchronous Serial Protocol or National
// Semiconductor Microwire.
// - Clock bit-rate Dynamic control of the serial bit rate of
// the data transfer; used in only serial-master mode of
// operation.
// - Data Item size (4 to 32 bits) Item size of each data
// transfer under the control of the programmer.
// * Configured features:
// - FIFO depth 16 words deep. The FIFO width is fixed at 32
// bits.
// - 1 slave select output.
// - Hardware slave-select Dedicated hardware slave-select
// line.
// - Combined interrupt line - one combined interrupt line from
// the DW_apb_ssi to the interrupt controller.
// - Interrupt polarity active high interrupt lines.
// - Serial clock polarity low serial-clock polarity directly
// after reset.
// - Serial clock phase capture on first edge of serial-clock
// directly after reset.
// =============================================================================
#ifndef HARDWARE_REGS_SSI_DEFINED
#define HARDWARE_REGS_SSI_DEFINED
// =============================================================================
// Register : SSI_CTRLR0
// Description : Control register 0
#define SSI_CTRLR0_OFFSET _u(0x00000000)
#define SSI_CTRLR0_BITS _u(0x017fffff)
#define SSI_CTRLR0_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_SSTE
// Description : Slave select toggle enable
#define SSI_CTRLR0_SSTE_RESET _u(0x0)
#define SSI_CTRLR0_SSTE_BITS _u(0x01000000)
#define SSI_CTRLR0_SSTE_MSB _u(24)
#define SSI_CTRLR0_SSTE_LSB _u(24)
#define SSI_CTRLR0_SSTE_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_SPI_FRF
// Description : SPI frame format
// 0x0 -> Standard 1-bit SPI frame format; 1 bit per SCK,
// full-duplex
// 0x1 -> Dual-SPI frame format; two bits per SCK, half-duplex
// 0x2 -> Quad-SPI frame format; four bits per SCK, half-duplex
#define SSI_CTRLR0_SPI_FRF_RESET _u(0x0)
#define SSI_CTRLR0_SPI_FRF_BITS _u(0x00600000)
#define SSI_CTRLR0_SPI_FRF_MSB _u(22)
#define SSI_CTRLR0_SPI_FRF_LSB _u(21)
#define SSI_CTRLR0_SPI_FRF_ACCESS "RW"
#define SSI_CTRLR0_SPI_FRF_VALUE_STD _u(0x0)
#define SSI_CTRLR0_SPI_FRF_VALUE_DUAL _u(0x1)
#define SSI_CTRLR0_SPI_FRF_VALUE_QUAD _u(0x2)
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_DFS_32
// Description : Data frame size in 32b transfer mode
// Value of n -> n+1 clocks per frame.
#define SSI_CTRLR0_DFS_32_RESET _u(0x00)
#define SSI_CTRLR0_DFS_32_BITS _u(0x001f0000)
#define SSI_CTRLR0_DFS_32_MSB _u(20)
#define SSI_CTRLR0_DFS_32_LSB _u(16)
#define SSI_CTRLR0_DFS_32_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_CFS
// Description : Control frame size
// Value of n -> n+1 clocks per frame.
#define SSI_CTRLR0_CFS_RESET _u(0x0)
#define SSI_CTRLR0_CFS_BITS _u(0x0000f000)
#define SSI_CTRLR0_CFS_MSB _u(15)
#define SSI_CTRLR0_CFS_LSB _u(12)
#define SSI_CTRLR0_CFS_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_SRL
// Description : Shift register loop (test mode)
#define SSI_CTRLR0_SRL_RESET _u(0x0)
#define SSI_CTRLR0_SRL_BITS _u(0x00000800)
#define SSI_CTRLR0_SRL_MSB _u(11)
#define SSI_CTRLR0_SRL_LSB _u(11)
#define SSI_CTRLR0_SRL_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_SLV_OE
// Description : Slave output enable
#define SSI_CTRLR0_SLV_OE_RESET _u(0x0)
#define SSI_CTRLR0_SLV_OE_BITS _u(0x00000400)
#define SSI_CTRLR0_SLV_OE_MSB _u(10)
#define SSI_CTRLR0_SLV_OE_LSB _u(10)
#define SSI_CTRLR0_SLV_OE_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_TMOD
// Description : Transfer mode
// 0x0 -> Both transmit and receive
// 0x1 -> Transmit only (not for FRF == 0, standard SPI mode)
// 0x2 -> Receive only (not for FRF == 0, standard SPI mode)
// 0x3 -> EEPROM read mode (TX then RX; RX starts after control
// data TX'd)
#define SSI_CTRLR0_TMOD_RESET _u(0x0)
#define SSI_CTRLR0_TMOD_BITS _u(0x00000300)
#define SSI_CTRLR0_TMOD_MSB _u(9)
#define SSI_CTRLR0_TMOD_LSB _u(8)
#define SSI_CTRLR0_TMOD_ACCESS "RW"
#define SSI_CTRLR0_TMOD_VALUE_TX_AND_RX _u(0x0)
#define SSI_CTRLR0_TMOD_VALUE_TX_ONLY _u(0x1)
#define SSI_CTRLR0_TMOD_VALUE_RX_ONLY _u(0x2)
#define SSI_CTRLR0_TMOD_VALUE_EEPROM_READ _u(0x3)
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_SCPOL
// Description : Serial clock polarity
#define SSI_CTRLR0_SCPOL_RESET _u(0x0)
#define SSI_CTRLR0_SCPOL_BITS _u(0x00000080)
#define SSI_CTRLR0_SCPOL_MSB _u(7)
#define SSI_CTRLR0_SCPOL_LSB _u(7)
#define SSI_CTRLR0_SCPOL_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_SCPH
// Description : Serial clock phase
#define SSI_CTRLR0_SCPH_RESET _u(0x0)
#define SSI_CTRLR0_SCPH_BITS _u(0x00000040)
#define SSI_CTRLR0_SCPH_MSB _u(6)
#define SSI_CTRLR0_SCPH_LSB _u(6)
#define SSI_CTRLR0_SCPH_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_FRF
// Description : Frame format
#define SSI_CTRLR0_FRF_RESET _u(0x0)
#define SSI_CTRLR0_FRF_BITS _u(0x00000030)
#define SSI_CTRLR0_FRF_MSB _u(5)
#define SSI_CTRLR0_FRF_LSB _u(4)
#define SSI_CTRLR0_FRF_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR0_DFS
// Description : Data frame size
#define SSI_CTRLR0_DFS_RESET _u(0x0)
#define SSI_CTRLR0_DFS_BITS _u(0x0000000f)
#define SSI_CTRLR0_DFS_MSB _u(3)
#define SSI_CTRLR0_DFS_LSB _u(0)
#define SSI_CTRLR0_DFS_ACCESS "RW"
// =============================================================================
// Register : SSI_CTRLR1
// Description : Master Control register 1
#define SSI_CTRLR1_OFFSET _u(0x00000004)
#define SSI_CTRLR1_BITS _u(0x0000ffff)
#define SSI_CTRLR1_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_CTRLR1_NDF
// Description : Number of data frames
#define SSI_CTRLR1_NDF_RESET _u(0x0000)
#define SSI_CTRLR1_NDF_BITS _u(0x0000ffff)
#define SSI_CTRLR1_NDF_MSB _u(15)
#define SSI_CTRLR1_NDF_LSB _u(0)
#define SSI_CTRLR1_NDF_ACCESS "RW"
// =============================================================================
// Register : SSI_SSIENR
// Description : SSI Enable
#define SSI_SSIENR_OFFSET _u(0x00000008)
#define SSI_SSIENR_BITS _u(0x00000001)
#define SSI_SSIENR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_SSIENR_SSI_EN
// Description : SSI enable
#define SSI_SSIENR_SSI_EN_RESET _u(0x0)
#define SSI_SSIENR_SSI_EN_BITS _u(0x00000001)
#define SSI_SSIENR_SSI_EN_MSB _u(0)
#define SSI_SSIENR_SSI_EN_LSB _u(0)
#define SSI_SSIENR_SSI_EN_ACCESS "RW"
// =============================================================================
// Register : SSI_MWCR
// Description : Microwire Control
#define SSI_MWCR_OFFSET _u(0x0000000c)
#define SSI_MWCR_BITS _u(0x00000007)
#define SSI_MWCR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_MWCR_MHS
// Description : Microwire handshaking
#define SSI_MWCR_MHS_RESET _u(0x0)
#define SSI_MWCR_MHS_BITS _u(0x00000004)
#define SSI_MWCR_MHS_MSB _u(2)
#define SSI_MWCR_MHS_LSB _u(2)
#define SSI_MWCR_MHS_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_MWCR_MDD
// Description : Microwire control
#define SSI_MWCR_MDD_RESET _u(0x0)
#define SSI_MWCR_MDD_BITS _u(0x00000002)
#define SSI_MWCR_MDD_MSB _u(1)
#define SSI_MWCR_MDD_LSB _u(1)
#define SSI_MWCR_MDD_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_MWCR_MWMOD
// Description : Microwire transfer mode
#define SSI_MWCR_MWMOD_RESET _u(0x0)
#define SSI_MWCR_MWMOD_BITS _u(0x00000001)
#define SSI_MWCR_MWMOD_MSB _u(0)
#define SSI_MWCR_MWMOD_LSB _u(0)
#define SSI_MWCR_MWMOD_ACCESS "RW"
// =============================================================================
// Register : SSI_SER
// Description : Slave enable
// For each bit:
// 0 -> slave not selected
// 1 -> slave selected
#define SSI_SER_OFFSET _u(0x00000010)
#define SSI_SER_BITS _u(0x00000001)
#define SSI_SER_RESET _u(0x00000000)
#define SSI_SER_MSB _u(0)
#define SSI_SER_LSB _u(0)
#define SSI_SER_ACCESS "RW"
// =============================================================================
// Register : SSI_BAUDR
// Description : Baud rate
#define SSI_BAUDR_OFFSET _u(0x00000014)
#define SSI_BAUDR_BITS _u(0x0000ffff)
#define SSI_BAUDR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_BAUDR_SCKDV
// Description : SSI clock divider
#define SSI_BAUDR_SCKDV_RESET _u(0x0000)
#define SSI_BAUDR_SCKDV_BITS _u(0x0000ffff)
#define SSI_BAUDR_SCKDV_MSB _u(15)
#define SSI_BAUDR_SCKDV_LSB _u(0)
#define SSI_BAUDR_SCKDV_ACCESS "RW"
// =============================================================================
// Register : SSI_TXFTLR
// Description : TX FIFO threshold level
#define SSI_TXFTLR_OFFSET _u(0x00000018)
#define SSI_TXFTLR_BITS _u(0x000000ff)
#define SSI_TXFTLR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_TXFTLR_TFT
// Description : Transmit FIFO threshold
#define SSI_TXFTLR_TFT_RESET _u(0x00)
#define SSI_TXFTLR_TFT_BITS _u(0x000000ff)
#define SSI_TXFTLR_TFT_MSB _u(7)
#define SSI_TXFTLR_TFT_LSB _u(0)
#define SSI_TXFTLR_TFT_ACCESS "RW"
// =============================================================================
// Register : SSI_RXFTLR
// Description : RX FIFO threshold level
#define SSI_RXFTLR_OFFSET _u(0x0000001c)
#define SSI_RXFTLR_BITS _u(0x000000ff)
#define SSI_RXFTLR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_RXFTLR_RFT
// Description : Receive FIFO threshold
#define SSI_RXFTLR_RFT_RESET _u(0x00)
#define SSI_RXFTLR_RFT_BITS _u(0x000000ff)
#define SSI_RXFTLR_RFT_MSB _u(7)
#define SSI_RXFTLR_RFT_LSB _u(0)
#define SSI_RXFTLR_RFT_ACCESS "RW"
// =============================================================================
// Register : SSI_TXFLR
// Description : TX FIFO level
#define SSI_TXFLR_OFFSET _u(0x00000020)
#define SSI_TXFLR_BITS _u(0x000000ff)
#define SSI_TXFLR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_TXFLR_TFTFL
// Description : Transmit FIFO level
#define SSI_TXFLR_TFTFL_RESET _u(0x00)
#define SSI_TXFLR_TFTFL_BITS _u(0x000000ff)
#define SSI_TXFLR_TFTFL_MSB _u(7)
#define SSI_TXFLR_TFTFL_LSB _u(0)
#define SSI_TXFLR_TFTFL_ACCESS "RO"
// =============================================================================
// Register : SSI_RXFLR
// Description : RX FIFO level
#define SSI_RXFLR_OFFSET _u(0x00000024)
#define SSI_RXFLR_BITS _u(0x000000ff)
#define SSI_RXFLR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_RXFLR_RXTFL
// Description : Receive FIFO level
#define SSI_RXFLR_RXTFL_RESET _u(0x00)
#define SSI_RXFLR_RXTFL_BITS _u(0x000000ff)
#define SSI_RXFLR_RXTFL_MSB _u(7)
#define SSI_RXFLR_RXTFL_LSB _u(0)
#define SSI_RXFLR_RXTFL_ACCESS "RO"
// =============================================================================
// Register : SSI_SR
// Description : Status register
#define SSI_SR_OFFSET _u(0x00000028)
#define SSI_SR_BITS _u(0x0000007f)
#define SSI_SR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_SR_DCOL
// Description : Data collision error
#define SSI_SR_DCOL_RESET _u(0x0)
#define SSI_SR_DCOL_BITS _u(0x00000040)
#define SSI_SR_DCOL_MSB _u(6)
#define SSI_SR_DCOL_LSB _u(6)
#define SSI_SR_DCOL_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_SR_TXE
// Description : Transmission error
#define SSI_SR_TXE_RESET _u(0x0)
#define SSI_SR_TXE_BITS _u(0x00000020)
#define SSI_SR_TXE_MSB _u(5)
#define SSI_SR_TXE_LSB _u(5)
#define SSI_SR_TXE_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_SR_RFF
// Description : Receive FIFO full
#define SSI_SR_RFF_RESET _u(0x0)
#define SSI_SR_RFF_BITS _u(0x00000010)
#define SSI_SR_RFF_MSB _u(4)
#define SSI_SR_RFF_LSB _u(4)
#define SSI_SR_RFF_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_SR_RFNE
// Description : Receive FIFO not empty
#define SSI_SR_RFNE_RESET _u(0x0)
#define SSI_SR_RFNE_BITS _u(0x00000008)
#define SSI_SR_RFNE_MSB _u(3)
#define SSI_SR_RFNE_LSB _u(3)
#define SSI_SR_RFNE_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_SR_TFE
// Description : Transmit FIFO empty
#define SSI_SR_TFE_RESET _u(0x0)
#define SSI_SR_TFE_BITS _u(0x00000004)
#define SSI_SR_TFE_MSB _u(2)
#define SSI_SR_TFE_LSB _u(2)
#define SSI_SR_TFE_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_SR_TFNF
// Description : Transmit FIFO not full
#define SSI_SR_TFNF_RESET _u(0x0)
#define SSI_SR_TFNF_BITS _u(0x00000002)
#define SSI_SR_TFNF_MSB _u(1)
#define SSI_SR_TFNF_LSB _u(1)
#define SSI_SR_TFNF_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_SR_BUSY
// Description : SSI busy flag
#define SSI_SR_BUSY_RESET _u(0x0)
#define SSI_SR_BUSY_BITS _u(0x00000001)
#define SSI_SR_BUSY_MSB _u(0)
#define SSI_SR_BUSY_LSB _u(0)
#define SSI_SR_BUSY_ACCESS "RO"
// =============================================================================
// Register : SSI_IMR
// Description : Interrupt mask
#define SSI_IMR_OFFSET _u(0x0000002c)
#define SSI_IMR_BITS _u(0x0000003f)
#define SSI_IMR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_IMR_MSTIM
// Description : Multi-master contention interrupt mask
#define SSI_IMR_MSTIM_RESET _u(0x0)
#define SSI_IMR_MSTIM_BITS _u(0x00000020)
#define SSI_IMR_MSTIM_MSB _u(5)
#define SSI_IMR_MSTIM_LSB _u(5)
#define SSI_IMR_MSTIM_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_IMR_RXFIM
// Description : Receive FIFO full interrupt mask
#define SSI_IMR_RXFIM_RESET _u(0x0)
#define SSI_IMR_RXFIM_BITS _u(0x00000010)
#define SSI_IMR_RXFIM_MSB _u(4)
#define SSI_IMR_RXFIM_LSB _u(4)
#define SSI_IMR_RXFIM_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_IMR_RXOIM
// Description : Receive FIFO overflow interrupt mask
#define SSI_IMR_RXOIM_RESET _u(0x0)
#define SSI_IMR_RXOIM_BITS _u(0x00000008)
#define SSI_IMR_RXOIM_MSB _u(3)
#define SSI_IMR_RXOIM_LSB _u(3)
#define SSI_IMR_RXOIM_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_IMR_RXUIM
// Description : Receive FIFO underflow interrupt mask
#define SSI_IMR_RXUIM_RESET _u(0x0)
#define SSI_IMR_RXUIM_BITS _u(0x00000004)
#define SSI_IMR_RXUIM_MSB _u(2)
#define SSI_IMR_RXUIM_LSB _u(2)
#define SSI_IMR_RXUIM_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_IMR_TXOIM
// Description : Transmit FIFO overflow interrupt mask
#define SSI_IMR_TXOIM_RESET _u(0x0)
#define SSI_IMR_TXOIM_BITS _u(0x00000002)
#define SSI_IMR_TXOIM_MSB _u(1)
#define SSI_IMR_TXOIM_LSB _u(1)
#define SSI_IMR_TXOIM_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_IMR_TXEIM
// Description : Transmit FIFO empty interrupt mask
#define SSI_IMR_TXEIM_RESET _u(0x0)
#define SSI_IMR_TXEIM_BITS _u(0x00000001)
#define SSI_IMR_TXEIM_MSB _u(0)
#define SSI_IMR_TXEIM_LSB _u(0)
#define SSI_IMR_TXEIM_ACCESS "RW"
// =============================================================================
// Register : SSI_ISR
// Description : Interrupt status
#define SSI_ISR_OFFSET _u(0x00000030)
#define SSI_ISR_BITS _u(0x0000003f)
#define SSI_ISR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_ISR_MSTIS
// Description : Multi-master contention interrupt status
#define SSI_ISR_MSTIS_RESET _u(0x0)
#define SSI_ISR_MSTIS_BITS _u(0x00000020)
#define SSI_ISR_MSTIS_MSB _u(5)
#define SSI_ISR_MSTIS_LSB _u(5)
#define SSI_ISR_MSTIS_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_ISR_RXFIS
// Description : Receive FIFO full interrupt status
#define SSI_ISR_RXFIS_RESET _u(0x0)
#define SSI_ISR_RXFIS_BITS _u(0x00000010)
#define SSI_ISR_RXFIS_MSB _u(4)
#define SSI_ISR_RXFIS_LSB _u(4)
#define SSI_ISR_RXFIS_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_ISR_RXOIS
// Description : Receive FIFO overflow interrupt status
#define SSI_ISR_RXOIS_RESET _u(0x0)
#define SSI_ISR_RXOIS_BITS _u(0x00000008)
#define SSI_ISR_RXOIS_MSB _u(3)
#define SSI_ISR_RXOIS_LSB _u(3)
#define SSI_ISR_RXOIS_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_ISR_RXUIS
// Description : Receive FIFO underflow interrupt status
#define SSI_ISR_RXUIS_RESET _u(0x0)
#define SSI_ISR_RXUIS_BITS _u(0x00000004)
#define SSI_ISR_RXUIS_MSB _u(2)
#define SSI_ISR_RXUIS_LSB _u(2)
#define SSI_ISR_RXUIS_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_ISR_TXOIS
// Description : Transmit FIFO overflow interrupt status
#define SSI_ISR_TXOIS_RESET _u(0x0)
#define SSI_ISR_TXOIS_BITS _u(0x00000002)
#define SSI_ISR_TXOIS_MSB _u(1)
#define SSI_ISR_TXOIS_LSB _u(1)
#define SSI_ISR_TXOIS_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_ISR_TXEIS
// Description : Transmit FIFO empty interrupt status
#define SSI_ISR_TXEIS_RESET _u(0x0)
#define SSI_ISR_TXEIS_BITS _u(0x00000001)
#define SSI_ISR_TXEIS_MSB _u(0)
#define SSI_ISR_TXEIS_LSB _u(0)
#define SSI_ISR_TXEIS_ACCESS "RO"
// =============================================================================
// Register : SSI_RISR
// Description : Raw interrupt status
#define SSI_RISR_OFFSET _u(0x00000034)
#define SSI_RISR_BITS _u(0x0000003f)
#define SSI_RISR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_RISR_MSTIR
// Description : Multi-master contention raw interrupt status
#define SSI_RISR_MSTIR_RESET _u(0x0)
#define SSI_RISR_MSTIR_BITS _u(0x00000020)
#define SSI_RISR_MSTIR_MSB _u(5)
#define SSI_RISR_MSTIR_LSB _u(5)
#define SSI_RISR_MSTIR_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_RISR_RXFIR
// Description : Receive FIFO full raw interrupt status
#define SSI_RISR_RXFIR_RESET _u(0x0)
#define SSI_RISR_RXFIR_BITS _u(0x00000010)
#define SSI_RISR_RXFIR_MSB _u(4)
#define SSI_RISR_RXFIR_LSB _u(4)
#define SSI_RISR_RXFIR_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_RISR_RXOIR
// Description : Receive FIFO overflow raw interrupt status
#define SSI_RISR_RXOIR_RESET _u(0x0)
#define SSI_RISR_RXOIR_BITS _u(0x00000008)
#define SSI_RISR_RXOIR_MSB _u(3)
#define SSI_RISR_RXOIR_LSB _u(3)
#define SSI_RISR_RXOIR_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_RISR_RXUIR
// Description : Receive FIFO underflow raw interrupt status
#define SSI_RISR_RXUIR_RESET _u(0x0)
#define SSI_RISR_RXUIR_BITS _u(0x00000004)
#define SSI_RISR_RXUIR_MSB _u(2)
#define SSI_RISR_RXUIR_LSB _u(2)
#define SSI_RISR_RXUIR_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_RISR_TXOIR
// Description : Transmit FIFO overflow raw interrupt status
#define SSI_RISR_TXOIR_RESET _u(0x0)
#define SSI_RISR_TXOIR_BITS _u(0x00000002)
#define SSI_RISR_TXOIR_MSB _u(1)
#define SSI_RISR_TXOIR_LSB _u(1)
#define SSI_RISR_TXOIR_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SSI_RISR_TXEIR
// Description : Transmit FIFO empty raw interrupt status
#define SSI_RISR_TXEIR_RESET _u(0x0)
#define SSI_RISR_TXEIR_BITS _u(0x00000001)
#define SSI_RISR_TXEIR_MSB _u(0)
#define SSI_RISR_TXEIR_LSB _u(0)
#define SSI_RISR_TXEIR_ACCESS "RO"
// =============================================================================
// Register : SSI_TXOICR
// Description : TX FIFO overflow interrupt clear
// Clear-on-read transmit FIFO overflow interrupt
#define SSI_TXOICR_OFFSET _u(0x00000038)
#define SSI_TXOICR_BITS _u(0x00000001)
#define SSI_TXOICR_RESET _u(0x00000000)
#define SSI_TXOICR_MSB _u(0)
#define SSI_TXOICR_LSB _u(0)
#define SSI_TXOICR_ACCESS "RO"
// =============================================================================
// Register : SSI_RXOICR
// Description : RX FIFO overflow interrupt clear
// Clear-on-read receive FIFO overflow interrupt
#define SSI_RXOICR_OFFSET _u(0x0000003c)
#define SSI_RXOICR_BITS _u(0x00000001)
#define SSI_RXOICR_RESET _u(0x00000000)
#define SSI_RXOICR_MSB _u(0)
#define SSI_RXOICR_LSB _u(0)
#define SSI_RXOICR_ACCESS "RO"
// =============================================================================
// Register : SSI_RXUICR
// Description : RX FIFO underflow interrupt clear
// Clear-on-read receive FIFO underflow interrupt
#define SSI_RXUICR_OFFSET _u(0x00000040)
#define SSI_RXUICR_BITS _u(0x00000001)
#define SSI_RXUICR_RESET _u(0x00000000)
#define SSI_RXUICR_MSB _u(0)
#define SSI_RXUICR_LSB _u(0)
#define SSI_RXUICR_ACCESS "RO"
// =============================================================================
// Register : SSI_MSTICR
// Description : Multi-master interrupt clear
// Clear-on-read multi-master contention interrupt
#define SSI_MSTICR_OFFSET _u(0x00000044)
#define SSI_MSTICR_BITS _u(0x00000001)
#define SSI_MSTICR_RESET _u(0x00000000)
#define SSI_MSTICR_MSB _u(0)
#define SSI_MSTICR_LSB _u(0)
#define SSI_MSTICR_ACCESS "RO"
// =============================================================================
// Register : SSI_ICR
// Description : Interrupt clear
// Clear-on-read all active interrupts
#define SSI_ICR_OFFSET _u(0x00000048)
#define SSI_ICR_BITS _u(0x00000001)
#define SSI_ICR_RESET _u(0x00000000)
#define SSI_ICR_MSB _u(0)
#define SSI_ICR_LSB _u(0)
#define SSI_ICR_ACCESS "RO"
// =============================================================================
// Register : SSI_DMACR
// Description : DMA control
#define SSI_DMACR_OFFSET _u(0x0000004c)
#define SSI_DMACR_BITS _u(0x00000003)
#define SSI_DMACR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_DMACR_TDMAE
// Description : Transmit DMA enable
#define SSI_DMACR_TDMAE_RESET _u(0x0)
#define SSI_DMACR_TDMAE_BITS _u(0x00000002)
#define SSI_DMACR_TDMAE_MSB _u(1)
#define SSI_DMACR_TDMAE_LSB _u(1)
#define SSI_DMACR_TDMAE_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_DMACR_RDMAE
// Description : Receive DMA enable
#define SSI_DMACR_RDMAE_RESET _u(0x0)
#define SSI_DMACR_RDMAE_BITS _u(0x00000001)
#define SSI_DMACR_RDMAE_MSB _u(0)
#define SSI_DMACR_RDMAE_LSB _u(0)
#define SSI_DMACR_RDMAE_ACCESS "RW"
// =============================================================================
// Register : SSI_DMATDLR
// Description : DMA TX data level
#define SSI_DMATDLR_OFFSET _u(0x00000050)
#define SSI_DMATDLR_BITS _u(0x000000ff)
#define SSI_DMATDLR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_DMATDLR_DMATDL
// Description : Transmit data watermark level
#define SSI_DMATDLR_DMATDL_RESET _u(0x00)
#define SSI_DMATDLR_DMATDL_BITS _u(0x000000ff)
#define SSI_DMATDLR_DMATDL_MSB _u(7)
#define SSI_DMATDLR_DMATDL_LSB _u(0)
#define SSI_DMATDLR_DMATDL_ACCESS "RW"
// =============================================================================
// Register : SSI_DMARDLR
// Description : DMA RX data level
#define SSI_DMARDLR_OFFSET _u(0x00000054)
#define SSI_DMARDLR_BITS _u(0x000000ff)
#define SSI_DMARDLR_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_DMARDLR_DMARDL
// Description : Receive data watermark level (DMARDLR+1)
#define SSI_DMARDLR_DMARDL_RESET _u(0x00)
#define SSI_DMARDLR_DMARDL_BITS _u(0x000000ff)
#define SSI_DMARDLR_DMARDL_MSB _u(7)
#define SSI_DMARDLR_DMARDL_LSB _u(0)
#define SSI_DMARDLR_DMARDL_ACCESS "RW"
// =============================================================================
// Register : SSI_IDR
// Description : Identification register
#define SSI_IDR_OFFSET _u(0x00000058)
#define SSI_IDR_BITS _u(0xffffffff)
#define SSI_IDR_RESET _u(0x51535049)
// -----------------------------------------------------------------------------
// Field : SSI_IDR_IDCODE
// Description : Peripheral dentification code
#define SSI_IDR_IDCODE_RESET _u(0x51535049)
#define SSI_IDR_IDCODE_BITS _u(0xffffffff)
#define SSI_IDR_IDCODE_MSB _u(31)
#define SSI_IDR_IDCODE_LSB _u(0)
#define SSI_IDR_IDCODE_ACCESS "RO"
// =============================================================================
// Register : SSI_SSI_VERSION_ID
// Description : Version ID
#define SSI_SSI_VERSION_ID_OFFSET _u(0x0000005c)
#define SSI_SSI_VERSION_ID_BITS _u(0xffffffff)
#define SSI_SSI_VERSION_ID_RESET _u(0x3430312a)
// -----------------------------------------------------------------------------
// Field : SSI_SSI_VERSION_ID_SSI_COMP_VERSION
// Description : SNPS component version (format X.YY)
#define SSI_SSI_VERSION_ID_SSI_COMP_VERSION_RESET _u(0x3430312a)
#define SSI_SSI_VERSION_ID_SSI_COMP_VERSION_BITS _u(0xffffffff)
#define SSI_SSI_VERSION_ID_SSI_COMP_VERSION_MSB _u(31)
#define SSI_SSI_VERSION_ID_SSI_COMP_VERSION_LSB _u(0)
#define SSI_SSI_VERSION_ID_SSI_COMP_VERSION_ACCESS "RO"
// =============================================================================
// Register : SSI_DR0
// Description : Data Register 0 (of 36)
#define SSI_DR0_OFFSET _u(0x00000060)
#define SSI_DR0_BITS _u(0xffffffff)
#define SSI_DR0_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_DR0_DR
// Description : First data register of 36
#define SSI_DR0_DR_RESET _u(0x00000000)
#define SSI_DR0_DR_BITS _u(0xffffffff)
#define SSI_DR0_DR_MSB _u(31)
#define SSI_DR0_DR_LSB _u(0)
#define SSI_DR0_DR_ACCESS "RW"
// =============================================================================
// Register : SSI_RX_SAMPLE_DLY
// Description : RX sample delay
#define SSI_RX_SAMPLE_DLY_OFFSET _u(0x000000f0)
#define SSI_RX_SAMPLE_DLY_BITS _u(0x000000ff)
#define SSI_RX_SAMPLE_DLY_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_RX_SAMPLE_DLY_RSD
// Description : RXD sample delay (in SCLK cycles)
#define SSI_RX_SAMPLE_DLY_RSD_RESET _u(0x00)
#define SSI_RX_SAMPLE_DLY_RSD_BITS _u(0x000000ff)
#define SSI_RX_SAMPLE_DLY_RSD_MSB _u(7)
#define SSI_RX_SAMPLE_DLY_RSD_LSB _u(0)
#define SSI_RX_SAMPLE_DLY_RSD_ACCESS "RW"
// =============================================================================
// Register : SSI_SPI_CTRLR0
// Description : SPI control
#define SSI_SPI_CTRLR0_OFFSET _u(0x000000f4)
#define SSI_SPI_CTRLR0_BITS _u(0xff07fb3f)
#define SSI_SPI_CTRLR0_RESET _u(0x03000000)
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_XIP_CMD
// Description : SPI Command to send in XIP mode (INST_L = 8-bit) or to append
// to Address (INST_L = 0-bit)
#define SSI_SPI_CTRLR0_XIP_CMD_RESET _u(0x03)
#define SSI_SPI_CTRLR0_XIP_CMD_BITS _u(0xff000000)
#define SSI_SPI_CTRLR0_XIP_CMD_MSB _u(31)
#define SSI_SPI_CTRLR0_XIP_CMD_LSB _u(24)
#define SSI_SPI_CTRLR0_XIP_CMD_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_SPI_RXDS_EN
// Description : Read data strobe enable
#define SSI_SPI_CTRLR0_SPI_RXDS_EN_RESET _u(0x0)
#define SSI_SPI_CTRLR0_SPI_RXDS_EN_BITS _u(0x00040000)
#define SSI_SPI_CTRLR0_SPI_RXDS_EN_MSB _u(18)
#define SSI_SPI_CTRLR0_SPI_RXDS_EN_LSB _u(18)
#define SSI_SPI_CTRLR0_SPI_RXDS_EN_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_INST_DDR_EN
// Description : Instruction DDR transfer enable
#define SSI_SPI_CTRLR0_INST_DDR_EN_RESET _u(0x0)
#define SSI_SPI_CTRLR0_INST_DDR_EN_BITS _u(0x00020000)
#define SSI_SPI_CTRLR0_INST_DDR_EN_MSB _u(17)
#define SSI_SPI_CTRLR0_INST_DDR_EN_LSB _u(17)
#define SSI_SPI_CTRLR0_INST_DDR_EN_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_SPI_DDR_EN
// Description : SPI DDR transfer enable
#define SSI_SPI_CTRLR0_SPI_DDR_EN_RESET _u(0x0)
#define SSI_SPI_CTRLR0_SPI_DDR_EN_BITS _u(0x00010000)
#define SSI_SPI_CTRLR0_SPI_DDR_EN_MSB _u(16)
#define SSI_SPI_CTRLR0_SPI_DDR_EN_LSB _u(16)
#define SSI_SPI_CTRLR0_SPI_DDR_EN_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_WAIT_CYCLES
// Description : Wait cycles between control frame transmit and data reception
// (in SCLK cycles)
#define SSI_SPI_CTRLR0_WAIT_CYCLES_RESET _u(0x00)
#define SSI_SPI_CTRLR0_WAIT_CYCLES_BITS _u(0x0000f800)
#define SSI_SPI_CTRLR0_WAIT_CYCLES_MSB _u(15)
#define SSI_SPI_CTRLR0_WAIT_CYCLES_LSB _u(11)
#define SSI_SPI_CTRLR0_WAIT_CYCLES_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_INST_L
// Description : Instruction length (0/4/8/16b)
// 0x0 -> No instruction
// 0x1 -> 4-bit instruction
// 0x2 -> 8-bit instruction
// 0x3 -> 16-bit instruction
#define SSI_SPI_CTRLR0_INST_L_RESET _u(0x0)
#define SSI_SPI_CTRLR0_INST_L_BITS _u(0x00000300)
#define SSI_SPI_CTRLR0_INST_L_MSB _u(9)
#define SSI_SPI_CTRLR0_INST_L_LSB _u(8)
#define SSI_SPI_CTRLR0_INST_L_ACCESS "RW"
#define SSI_SPI_CTRLR0_INST_L_VALUE_NONE _u(0x0)
#define SSI_SPI_CTRLR0_INST_L_VALUE_4B _u(0x1)
#define SSI_SPI_CTRLR0_INST_L_VALUE_8B _u(0x2)
#define SSI_SPI_CTRLR0_INST_L_VALUE_16B _u(0x3)
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_ADDR_L
// Description : Address length (0b-60b in 4b increments)
#define SSI_SPI_CTRLR0_ADDR_L_RESET _u(0x0)
#define SSI_SPI_CTRLR0_ADDR_L_BITS _u(0x0000003c)
#define SSI_SPI_CTRLR0_ADDR_L_MSB _u(5)
#define SSI_SPI_CTRLR0_ADDR_L_LSB _u(2)
#define SSI_SPI_CTRLR0_ADDR_L_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SSI_SPI_CTRLR0_TRANS_TYPE
// Description : Address and instruction transfer format
// 0x0 -> Command and address both in standard SPI frame format
// 0x1 -> Command in standard SPI format, address in format
// specified by FRF
// 0x2 -> Command and address both in format specified by FRF
// (e.g. Dual-SPI)
#define SSI_SPI_CTRLR0_TRANS_TYPE_RESET _u(0x0)
#define SSI_SPI_CTRLR0_TRANS_TYPE_BITS _u(0x00000003)
#define SSI_SPI_CTRLR0_TRANS_TYPE_MSB _u(1)
#define SSI_SPI_CTRLR0_TRANS_TYPE_LSB _u(0)
#define SSI_SPI_CTRLR0_TRANS_TYPE_ACCESS "RW"
#define SSI_SPI_CTRLR0_TRANS_TYPE_VALUE_1C1A _u(0x0)
#define SSI_SPI_CTRLR0_TRANS_TYPE_VALUE_1C2A _u(0x1)
#define SSI_SPI_CTRLR0_TRANS_TYPE_VALUE_2C2A _u(0x2)
// =============================================================================
// Register : SSI_TXD_DRIVE_EDGE
// Description : TX drive edge
#define SSI_TXD_DRIVE_EDGE_OFFSET _u(0x000000f8)
#define SSI_TXD_DRIVE_EDGE_BITS _u(0x000000ff)
#define SSI_TXD_DRIVE_EDGE_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SSI_TXD_DRIVE_EDGE_TDE
// Description : TXD drive edge
#define SSI_TXD_DRIVE_EDGE_TDE_RESET _u(0x00)
#define SSI_TXD_DRIVE_EDGE_TDE_BITS _u(0x000000ff)
#define SSI_TXD_DRIVE_EDGE_TDE_MSB _u(7)
#define SSI_TXD_DRIVE_EDGE_TDE_LSB _u(0)
#define SSI_TXD_DRIVE_EDGE_TDE_ACCESS "RW"
// =============================================================================
#endif // HARDWARE_REGS_SSI_DEFINED