mirror of https://github.com/Desuuuu/klipper.git
522 lines
26 KiB
C
522 lines
26 KiB
C
/**
|
|
* Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
// =============================================================================
|
|
// Register block : SPI
|
|
// Version : 1
|
|
// Bus type : apb
|
|
// Description : None
|
|
// =============================================================================
|
|
#ifndef HARDWARE_REGS_SPI_DEFINED
|
|
#define HARDWARE_REGS_SPI_DEFINED
|
|
// =============================================================================
|
|
// Register : SPI_SSPCR0
|
|
// Description : Control register 0, SSPCR0 on page 3-4
|
|
#define SPI_SSPCR0_OFFSET _u(0x00000000)
|
|
#define SPI_SSPCR0_BITS _u(0x0000ffff)
|
|
#define SPI_SSPCR0_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR0_SCR
|
|
// Description : Serial clock rate. The value SCR is used to generate the
|
|
// transmit and receive bit rate of the PrimeCell SSP. The bit
|
|
// rate is: F SSPCLK CPSDVSR x (1+SCR) where CPSDVSR is an even
|
|
// value from 2-254, programmed through the SSPCPSR register and
|
|
// SCR is a value from 0-255.
|
|
#define SPI_SSPCR0_SCR_RESET _u(0x00)
|
|
#define SPI_SSPCR0_SCR_BITS _u(0x0000ff00)
|
|
#define SPI_SSPCR0_SCR_MSB _u(15)
|
|
#define SPI_SSPCR0_SCR_LSB _u(8)
|
|
#define SPI_SSPCR0_SCR_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR0_SPH
|
|
// Description : SSPCLKOUT phase, applicable to Motorola SPI frame format only.
|
|
// See Motorola SPI frame format on page 2-10.
|
|
#define SPI_SSPCR0_SPH_RESET _u(0x0)
|
|
#define SPI_SSPCR0_SPH_BITS _u(0x00000080)
|
|
#define SPI_SSPCR0_SPH_MSB _u(7)
|
|
#define SPI_SSPCR0_SPH_LSB _u(7)
|
|
#define SPI_SSPCR0_SPH_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR0_SPO
|
|
// Description : SSPCLKOUT polarity, applicable to Motorola SPI frame format
|
|
// only. See Motorola SPI frame format on page 2-10.
|
|
#define SPI_SSPCR0_SPO_RESET _u(0x0)
|
|
#define SPI_SSPCR0_SPO_BITS _u(0x00000040)
|
|
#define SPI_SSPCR0_SPO_MSB _u(6)
|
|
#define SPI_SSPCR0_SPO_LSB _u(6)
|
|
#define SPI_SSPCR0_SPO_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR0_FRF
|
|
// Description : Frame format: 00 Motorola SPI frame format. 01 TI synchronous
|
|
// serial frame format. 10 National Microwire frame format. 11
|
|
// Reserved, undefined operation.
|
|
#define SPI_SSPCR0_FRF_RESET _u(0x0)
|
|
#define SPI_SSPCR0_FRF_BITS _u(0x00000030)
|
|
#define SPI_SSPCR0_FRF_MSB _u(5)
|
|
#define SPI_SSPCR0_FRF_LSB _u(4)
|
|
#define SPI_SSPCR0_FRF_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR0_DSS
|
|
// Description : Data Size Select: 0000 Reserved, undefined operation. 0001
|
|
// Reserved, undefined operation. 0010 Reserved, undefined
|
|
// operation. 0011 4-bit data. 0100 5-bit data. 0101 6-bit data.
|
|
// 0110 7-bit data. 0111 8-bit data. 1000 9-bit data. 1001 10-bit
|
|
// data. 1010 11-bit data. 1011 12-bit data. 1100 13-bit data.
|
|
// 1101 14-bit data. 1110 15-bit data. 1111 16-bit data.
|
|
#define SPI_SSPCR0_DSS_RESET _u(0x0)
|
|
#define SPI_SSPCR0_DSS_BITS _u(0x0000000f)
|
|
#define SPI_SSPCR0_DSS_MSB _u(3)
|
|
#define SPI_SSPCR0_DSS_LSB _u(0)
|
|
#define SPI_SSPCR0_DSS_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SPI_SSPCR1
|
|
// Description : Control register 1, SSPCR1 on page 3-5
|
|
#define SPI_SSPCR1_OFFSET _u(0x00000004)
|
|
#define SPI_SSPCR1_BITS _u(0x0000000f)
|
|
#define SPI_SSPCR1_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR1_SOD
|
|
// Description : Slave-mode output disable. This bit is relevant only in the
|
|
// slave mode, MS=1. In multiple-slave systems, it is possible for
|
|
// an PrimeCell SSP master to broadcast a message to all slaves in
|
|
// the system while ensuring that only one slave drives data onto
|
|
// its serial output line. In such systems the RXD lines from
|
|
// multiple slaves could be tied together. To operate in such
|
|
// systems, the SOD bit can be set if the PrimeCell SSP slave is
|
|
// not supposed to drive the SSPTXD line: 0 SSP can drive the
|
|
// SSPTXD output in slave mode. 1 SSP must not drive the SSPTXD
|
|
// output in slave mode.
|
|
#define SPI_SSPCR1_SOD_RESET _u(0x0)
|
|
#define SPI_SSPCR1_SOD_BITS _u(0x00000008)
|
|
#define SPI_SSPCR1_SOD_MSB _u(3)
|
|
#define SPI_SSPCR1_SOD_LSB _u(3)
|
|
#define SPI_SSPCR1_SOD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR1_MS
|
|
// Description : Master or slave mode select. This bit can be modified only when
|
|
// the PrimeCell SSP is disabled, SSE=0: 0 Device configured as
|
|
// master, default. 1 Device configured as slave.
|
|
#define SPI_SSPCR1_MS_RESET _u(0x0)
|
|
#define SPI_SSPCR1_MS_BITS _u(0x00000004)
|
|
#define SPI_SSPCR1_MS_MSB _u(2)
|
|
#define SPI_SSPCR1_MS_LSB _u(2)
|
|
#define SPI_SSPCR1_MS_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR1_SSE
|
|
// Description : Synchronous serial port enable: 0 SSP operation disabled. 1 SSP
|
|
// operation enabled.
|
|
#define SPI_SSPCR1_SSE_RESET _u(0x0)
|
|
#define SPI_SSPCR1_SSE_BITS _u(0x00000002)
|
|
#define SPI_SSPCR1_SSE_MSB _u(1)
|
|
#define SPI_SSPCR1_SSE_LSB _u(1)
|
|
#define SPI_SSPCR1_SSE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCR1_LBM
|
|
// Description : Loop back mode: 0 Normal serial port operation enabled. 1
|
|
// Output of transmit serial shifter is connected to input of
|
|
// receive serial shifter internally.
|
|
#define SPI_SSPCR1_LBM_RESET _u(0x0)
|
|
#define SPI_SSPCR1_LBM_BITS _u(0x00000001)
|
|
#define SPI_SSPCR1_LBM_MSB _u(0)
|
|
#define SPI_SSPCR1_LBM_LSB _u(0)
|
|
#define SPI_SSPCR1_LBM_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SPI_SSPDR
|
|
// Description : Data register, SSPDR on page 3-6
|
|
#define SPI_SSPDR_OFFSET _u(0x00000008)
|
|
#define SPI_SSPDR_BITS _u(0x0000ffff)
|
|
#define SPI_SSPDR_RESET "-"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPDR_DATA
|
|
// Description : Transmit/Receive FIFO: Read Receive FIFO. Write Transmit FIFO.
|
|
// You must right-justify data when the PrimeCell SSP is
|
|
// programmed for a data size that is less than 16 bits. Unused
|
|
// bits at the top are ignored by transmit logic. The receive
|
|
// logic automatically right-justifies.
|
|
#define SPI_SSPDR_DATA_RESET "-"
|
|
#define SPI_SSPDR_DATA_BITS _u(0x0000ffff)
|
|
#define SPI_SSPDR_DATA_MSB _u(15)
|
|
#define SPI_SSPDR_DATA_LSB _u(0)
|
|
#define SPI_SSPDR_DATA_ACCESS "RWF"
|
|
// =============================================================================
|
|
// Register : SPI_SSPSR
|
|
// Description : Status register, SSPSR on page 3-7
|
|
#define SPI_SSPSR_OFFSET _u(0x0000000c)
|
|
#define SPI_SSPSR_BITS _u(0x0000001f)
|
|
#define SPI_SSPSR_RESET _u(0x00000003)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPSR_BSY
|
|
// Description : PrimeCell SSP busy flag, RO: 0 SSP is idle. 1 SSP is currently
|
|
// transmitting and/or receiving a frame or the transmit FIFO is
|
|
// not empty.
|
|
#define SPI_SSPSR_BSY_RESET _u(0x0)
|
|
#define SPI_SSPSR_BSY_BITS _u(0x00000010)
|
|
#define SPI_SSPSR_BSY_MSB _u(4)
|
|
#define SPI_SSPSR_BSY_LSB _u(4)
|
|
#define SPI_SSPSR_BSY_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPSR_RFF
|
|
// Description : Receive FIFO full, RO: 0 Receive FIFO is not full. 1 Receive
|
|
// FIFO is full.
|
|
#define SPI_SSPSR_RFF_RESET _u(0x0)
|
|
#define SPI_SSPSR_RFF_BITS _u(0x00000008)
|
|
#define SPI_SSPSR_RFF_MSB _u(3)
|
|
#define SPI_SSPSR_RFF_LSB _u(3)
|
|
#define SPI_SSPSR_RFF_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPSR_RNE
|
|
// Description : Receive FIFO not empty, RO: 0 Receive FIFO is empty. 1 Receive
|
|
// FIFO is not empty.
|
|
#define SPI_SSPSR_RNE_RESET _u(0x0)
|
|
#define SPI_SSPSR_RNE_BITS _u(0x00000004)
|
|
#define SPI_SSPSR_RNE_MSB _u(2)
|
|
#define SPI_SSPSR_RNE_LSB _u(2)
|
|
#define SPI_SSPSR_RNE_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPSR_TNF
|
|
// Description : Transmit FIFO not full, RO: 0 Transmit FIFO is full. 1 Transmit
|
|
// FIFO is not full.
|
|
#define SPI_SSPSR_TNF_RESET _u(0x1)
|
|
#define SPI_SSPSR_TNF_BITS _u(0x00000002)
|
|
#define SPI_SSPSR_TNF_MSB _u(1)
|
|
#define SPI_SSPSR_TNF_LSB _u(1)
|
|
#define SPI_SSPSR_TNF_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPSR_TFE
|
|
// Description : Transmit FIFO empty, RO: 0 Transmit FIFO is not empty. 1
|
|
// Transmit FIFO is empty.
|
|
#define SPI_SSPSR_TFE_RESET _u(0x1)
|
|
#define SPI_SSPSR_TFE_BITS _u(0x00000001)
|
|
#define SPI_SSPSR_TFE_MSB _u(0)
|
|
#define SPI_SSPSR_TFE_LSB _u(0)
|
|
#define SPI_SSPSR_TFE_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPCPSR
|
|
// Description : Clock prescale register, SSPCPSR on page 3-8
|
|
#define SPI_SSPCPSR_OFFSET _u(0x00000010)
|
|
#define SPI_SSPCPSR_BITS _u(0x000000ff)
|
|
#define SPI_SSPCPSR_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPCPSR_CPSDVSR
|
|
// Description : Clock prescale divisor. Must be an even number from 2-254,
|
|
// depending on the frequency of SSPCLK. The least significant bit
|
|
// always returns zero on reads.
|
|
#define SPI_SSPCPSR_CPSDVSR_RESET _u(0x00)
|
|
#define SPI_SSPCPSR_CPSDVSR_BITS _u(0x000000ff)
|
|
#define SPI_SSPCPSR_CPSDVSR_MSB _u(7)
|
|
#define SPI_SSPCPSR_CPSDVSR_LSB _u(0)
|
|
#define SPI_SSPCPSR_CPSDVSR_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SPI_SSPIMSC
|
|
// Description : Interrupt mask set or clear register, SSPIMSC on page 3-9
|
|
#define SPI_SSPIMSC_OFFSET _u(0x00000014)
|
|
#define SPI_SSPIMSC_BITS _u(0x0000000f)
|
|
#define SPI_SSPIMSC_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPIMSC_TXIM
|
|
// Description : Transmit FIFO interrupt mask: 0 Transmit FIFO half empty or
|
|
// less condition interrupt is masked. 1 Transmit FIFO half empty
|
|
// or less condition interrupt is not masked.
|
|
#define SPI_SSPIMSC_TXIM_RESET _u(0x0)
|
|
#define SPI_SSPIMSC_TXIM_BITS _u(0x00000008)
|
|
#define SPI_SSPIMSC_TXIM_MSB _u(3)
|
|
#define SPI_SSPIMSC_TXIM_LSB _u(3)
|
|
#define SPI_SSPIMSC_TXIM_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPIMSC_RXIM
|
|
// Description : Receive FIFO interrupt mask: 0 Receive FIFO half full or less
|
|
// condition interrupt is masked. 1 Receive FIFO half full or less
|
|
// condition interrupt is not masked.
|
|
#define SPI_SSPIMSC_RXIM_RESET _u(0x0)
|
|
#define SPI_SSPIMSC_RXIM_BITS _u(0x00000004)
|
|
#define SPI_SSPIMSC_RXIM_MSB _u(2)
|
|
#define SPI_SSPIMSC_RXIM_LSB _u(2)
|
|
#define SPI_SSPIMSC_RXIM_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPIMSC_RTIM
|
|
// Description : Receive timeout interrupt mask: 0 Receive FIFO not empty and no
|
|
// read prior to timeout period interrupt is masked. 1 Receive
|
|
// FIFO not empty and no read prior to timeout period interrupt is
|
|
// not masked.
|
|
#define SPI_SSPIMSC_RTIM_RESET _u(0x0)
|
|
#define SPI_SSPIMSC_RTIM_BITS _u(0x00000002)
|
|
#define SPI_SSPIMSC_RTIM_MSB _u(1)
|
|
#define SPI_SSPIMSC_RTIM_LSB _u(1)
|
|
#define SPI_SSPIMSC_RTIM_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPIMSC_RORIM
|
|
// Description : Receive overrun interrupt mask: 0 Receive FIFO written to while
|
|
// full condition interrupt is masked. 1 Receive FIFO written to
|
|
// while full condition interrupt is not masked.
|
|
#define SPI_SSPIMSC_RORIM_RESET _u(0x0)
|
|
#define SPI_SSPIMSC_RORIM_BITS _u(0x00000001)
|
|
#define SPI_SSPIMSC_RORIM_MSB _u(0)
|
|
#define SPI_SSPIMSC_RORIM_LSB _u(0)
|
|
#define SPI_SSPIMSC_RORIM_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SPI_SSPRIS
|
|
// Description : Raw interrupt status register, SSPRIS on page 3-10
|
|
#define SPI_SSPRIS_OFFSET _u(0x00000018)
|
|
#define SPI_SSPRIS_BITS _u(0x0000000f)
|
|
#define SPI_SSPRIS_RESET _u(0x00000008)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPRIS_TXRIS
|
|
// Description : Gives the raw interrupt state, prior to masking, of the
|
|
// SSPTXINTR interrupt
|
|
#define SPI_SSPRIS_TXRIS_RESET _u(0x1)
|
|
#define SPI_SSPRIS_TXRIS_BITS _u(0x00000008)
|
|
#define SPI_SSPRIS_TXRIS_MSB _u(3)
|
|
#define SPI_SSPRIS_TXRIS_LSB _u(3)
|
|
#define SPI_SSPRIS_TXRIS_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPRIS_RXRIS
|
|
// Description : Gives the raw interrupt state, prior to masking, of the
|
|
// SSPRXINTR interrupt
|
|
#define SPI_SSPRIS_RXRIS_RESET _u(0x0)
|
|
#define SPI_SSPRIS_RXRIS_BITS _u(0x00000004)
|
|
#define SPI_SSPRIS_RXRIS_MSB _u(2)
|
|
#define SPI_SSPRIS_RXRIS_LSB _u(2)
|
|
#define SPI_SSPRIS_RXRIS_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPRIS_RTRIS
|
|
// Description : Gives the raw interrupt state, prior to masking, of the
|
|
// SSPRTINTR interrupt
|
|
#define SPI_SSPRIS_RTRIS_RESET _u(0x0)
|
|
#define SPI_SSPRIS_RTRIS_BITS _u(0x00000002)
|
|
#define SPI_SSPRIS_RTRIS_MSB _u(1)
|
|
#define SPI_SSPRIS_RTRIS_LSB _u(1)
|
|
#define SPI_SSPRIS_RTRIS_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPRIS_RORRIS
|
|
// Description : Gives the raw interrupt state, prior to masking, of the
|
|
// SSPRORINTR interrupt
|
|
#define SPI_SSPRIS_RORRIS_RESET _u(0x0)
|
|
#define SPI_SSPRIS_RORRIS_BITS _u(0x00000001)
|
|
#define SPI_SSPRIS_RORRIS_MSB _u(0)
|
|
#define SPI_SSPRIS_RORRIS_LSB _u(0)
|
|
#define SPI_SSPRIS_RORRIS_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPMIS
|
|
// Description : Masked interrupt status register, SSPMIS on page 3-11
|
|
#define SPI_SSPMIS_OFFSET _u(0x0000001c)
|
|
#define SPI_SSPMIS_BITS _u(0x0000000f)
|
|
#define SPI_SSPMIS_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPMIS_TXMIS
|
|
// Description : Gives the transmit FIFO masked interrupt state, after masking,
|
|
// of the SSPTXINTR interrupt
|
|
#define SPI_SSPMIS_TXMIS_RESET _u(0x0)
|
|
#define SPI_SSPMIS_TXMIS_BITS _u(0x00000008)
|
|
#define SPI_SSPMIS_TXMIS_MSB _u(3)
|
|
#define SPI_SSPMIS_TXMIS_LSB _u(3)
|
|
#define SPI_SSPMIS_TXMIS_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPMIS_RXMIS
|
|
// Description : Gives the receive FIFO masked interrupt state, after masking,
|
|
// of the SSPRXINTR interrupt
|
|
#define SPI_SSPMIS_RXMIS_RESET _u(0x0)
|
|
#define SPI_SSPMIS_RXMIS_BITS _u(0x00000004)
|
|
#define SPI_SSPMIS_RXMIS_MSB _u(2)
|
|
#define SPI_SSPMIS_RXMIS_LSB _u(2)
|
|
#define SPI_SSPMIS_RXMIS_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPMIS_RTMIS
|
|
// Description : Gives the receive timeout masked interrupt state, after
|
|
// masking, of the SSPRTINTR interrupt
|
|
#define SPI_SSPMIS_RTMIS_RESET _u(0x0)
|
|
#define SPI_SSPMIS_RTMIS_BITS _u(0x00000002)
|
|
#define SPI_SSPMIS_RTMIS_MSB _u(1)
|
|
#define SPI_SSPMIS_RTMIS_LSB _u(1)
|
|
#define SPI_SSPMIS_RTMIS_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPMIS_RORMIS
|
|
// Description : Gives the receive over run masked interrupt status, after
|
|
// masking, of the SSPRORINTR interrupt
|
|
#define SPI_SSPMIS_RORMIS_RESET _u(0x0)
|
|
#define SPI_SSPMIS_RORMIS_BITS _u(0x00000001)
|
|
#define SPI_SSPMIS_RORMIS_MSB _u(0)
|
|
#define SPI_SSPMIS_RORMIS_LSB _u(0)
|
|
#define SPI_SSPMIS_RORMIS_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPICR
|
|
// Description : Interrupt clear register, SSPICR on page 3-11
|
|
#define SPI_SSPICR_OFFSET _u(0x00000020)
|
|
#define SPI_SSPICR_BITS _u(0x00000003)
|
|
#define SPI_SSPICR_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPICR_RTIC
|
|
// Description : Clears the SSPRTINTR interrupt
|
|
#define SPI_SSPICR_RTIC_RESET _u(0x0)
|
|
#define SPI_SSPICR_RTIC_BITS _u(0x00000002)
|
|
#define SPI_SSPICR_RTIC_MSB _u(1)
|
|
#define SPI_SSPICR_RTIC_LSB _u(1)
|
|
#define SPI_SSPICR_RTIC_ACCESS "WC"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPICR_RORIC
|
|
// Description : Clears the SSPRORINTR interrupt
|
|
#define SPI_SSPICR_RORIC_RESET _u(0x0)
|
|
#define SPI_SSPICR_RORIC_BITS _u(0x00000001)
|
|
#define SPI_SSPICR_RORIC_MSB _u(0)
|
|
#define SPI_SSPICR_RORIC_LSB _u(0)
|
|
#define SPI_SSPICR_RORIC_ACCESS "WC"
|
|
// =============================================================================
|
|
// Register : SPI_SSPDMACR
|
|
// Description : DMA control register, SSPDMACR on page 3-12
|
|
#define SPI_SSPDMACR_OFFSET _u(0x00000024)
|
|
#define SPI_SSPDMACR_BITS _u(0x00000003)
|
|
#define SPI_SSPDMACR_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPDMACR_TXDMAE
|
|
// Description : Transmit DMA Enable. If this bit is set to 1, DMA for the
|
|
// transmit FIFO is enabled.
|
|
#define SPI_SSPDMACR_TXDMAE_RESET _u(0x0)
|
|
#define SPI_SSPDMACR_TXDMAE_BITS _u(0x00000002)
|
|
#define SPI_SSPDMACR_TXDMAE_MSB _u(1)
|
|
#define SPI_SSPDMACR_TXDMAE_LSB _u(1)
|
|
#define SPI_SSPDMACR_TXDMAE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPDMACR_RXDMAE
|
|
// Description : Receive DMA Enable. If this bit is set to 1, DMA for the
|
|
// receive FIFO is enabled.
|
|
#define SPI_SSPDMACR_RXDMAE_RESET _u(0x0)
|
|
#define SPI_SSPDMACR_RXDMAE_BITS _u(0x00000001)
|
|
#define SPI_SSPDMACR_RXDMAE_MSB _u(0)
|
|
#define SPI_SSPDMACR_RXDMAE_LSB _u(0)
|
|
#define SPI_SSPDMACR_RXDMAE_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPERIPHID0
|
|
// Description : Peripheral identification registers, SSPPeriphID0-3 on page
|
|
// 3-13
|
|
#define SPI_SSPPERIPHID0_OFFSET _u(0x00000fe0)
|
|
#define SPI_SSPPERIPHID0_BITS _u(0x000000ff)
|
|
#define SPI_SSPPERIPHID0_RESET _u(0x00000022)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPERIPHID0_PARTNUMBER0
|
|
// Description : These bits read back as 0x22
|
|
#define SPI_SSPPERIPHID0_PARTNUMBER0_RESET _u(0x22)
|
|
#define SPI_SSPPERIPHID0_PARTNUMBER0_BITS _u(0x000000ff)
|
|
#define SPI_SSPPERIPHID0_PARTNUMBER0_MSB _u(7)
|
|
#define SPI_SSPPERIPHID0_PARTNUMBER0_LSB _u(0)
|
|
#define SPI_SSPPERIPHID0_PARTNUMBER0_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPERIPHID1
|
|
// Description : Peripheral identification registers, SSPPeriphID0-3 on page
|
|
// 3-13
|
|
#define SPI_SSPPERIPHID1_OFFSET _u(0x00000fe4)
|
|
#define SPI_SSPPERIPHID1_BITS _u(0x000000ff)
|
|
#define SPI_SSPPERIPHID1_RESET _u(0x00000010)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPERIPHID1_DESIGNER0
|
|
// Description : These bits read back as 0x1
|
|
#define SPI_SSPPERIPHID1_DESIGNER0_RESET _u(0x1)
|
|
#define SPI_SSPPERIPHID1_DESIGNER0_BITS _u(0x000000f0)
|
|
#define SPI_SSPPERIPHID1_DESIGNER0_MSB _u(7)
|
|
#define SPI_SSPPERIPHID1_DESIGNER0_LSB _u(4)
|
|
#define SPI_SSPPERIPHID1_DESIGNER0_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPERIPHID1_PARTNUMBER1
|
|
// Description : These bits read back as 0x0
|
|
#define SPI_SSPPERIPHID1_PARTNUMBER1_RESET _u(0x0)
|
|
#define SPI_SSPPERIPHID1_PARTNUMBER1_BITS _u(0x0000000f)
|
|
#define SPI_SSPPERIPHID1_PARTNUMBER1_MSB _u(3)
|
|
#define SPI_SSPPERIPHID1_PARTNUMBER1_LSB _u(0)
|
|
#define SPI_SSPPERIPHID1_PARTNUMBER1_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPERIPHID2
|
|
// Description : Peripheral identification registers, SSPPeriphID0-3 on page
|
|
// 3-13
|
|
#define SPI_SSPPERIPHID2_OFFSET _u(0x00000fe8)
|
|
#define SPI_SSPPERIPHID2_BITS _u(0x000000ff)
|
|
#define SPI_SSPPERIPHID2_RESET _u(0x00000034)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPERIPHID2_REVISION
|
|
// Description : These bits return the peripheral revision
|
|
#define SPI_SSPPERIPHID2_REVISION_RESET _u(0x3)
|
|
#define SPI_SSPPERIPHID2_REVISION_BITS _u(0x000000f0)
|
|
#define SPI_SSPPERIPHID2_REVISION_MSB _u(7)
|
|
#define SPI_SSPPERIPHID2_REVISION_LSB _u(4)
|
|
#define SPI_SSPPERIPHID2_REVISION_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPERIPHID2_DESIGNER1
|
|
// Description : These bits read back as 0x4
|
|
#define SPI_SSPPERIPHID2_DESIGNER1_RESET _u(0x4)
|
|
#define SPI_SSPPERIPHID2_DESIGNER1_BITS _u(0x0000000f)
|
|
#define SPI_SSPPERIPHID2_DESIGNER1_MSB _u(3)
|
|
#define SPI_SSPPERIPHID2_DESIGNER1_LSB _u(0)
|
|
#define SPI_SSPPERIPHID2_DESIGNER1_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPERIPHID3
|
|
// Description : Peripheral identification registers, SSPPeriphID0-3 on page
|
|
// 3-13
|
|
#define SPI_SSPPERIPHID3_OFFSET _u(0x00000fec)
|
|
#define SPI_SSPPERIPHID3_BITS _u(0x000000ff)
|
|
#define SPI_SSPPERIPHID3_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPERIPHID3_CONFIGURATION
|
|
// Description : These bits read back as 0x00
|
|
#define SPI_SSPPERIPHID3_CONFIGURATION_RESET _u(0x00)
|
|
#define SPI_SSPPERIPHID3_CONFIGURATION_BITS _u(0x000000ff)
|
|
#define SPI_SSPPERIPHID3_CONFIGURATION_MSB _u(7)
|
|
#define SPI_SSPPERIPHID3_CONFIGURATION_LSB _u(0)
|
|
#define SPI_SSPPERIPHID3_CONFIGURATION_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPCELLID0
|
|
// Description : PrimeCell identification registers, SSPPCellID0-3 on page 3-16
|
|
#define SPI_SSPPCELLID0_OFFSET _u(0x00000ff0)
|
|
#define SPI_SSPPCELLID0_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID0_RESET _u(0x0000000d)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPCELLID0_SSPPCELLID0
|
|
// Description : These bits read back as 0x0D
|
|
#define SPI_SSPPCELLID0_SSPPCELLID0_RESET _u(0x0d)
|
|
#define SPI_SSPPCELLID0_SSPPCELLID0_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID0_SSPPCELLID0_MSB _u(7)
|
|
#define SPI_SSPPCELLID0_SSPPCELLID0_LSB _u(0)
|
|
#define SPI_SSPPCELLID0_SSPPCELLID0_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPCELLID1
|
|
// Description : PrimeCell identification registers, SSPPCellID0-3 on page 3-16
|
|
#define SPI_SSPPCELLID1_OFFSET _u(0x00000ff4)
|
|
#define SPI_SSPPCELLID1_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID1_RESET _u(0x000000f0)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPCELLID1_SSPPCELLID1
|
|
// Description : These bits read back as 0xF0
|
|
#define SPI_SSPPCELLID1_SSPPCELLID1_RESET _u(0xf0)
|
|
#define SPI_SSPPCELLID1_SSPPCELLID1_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID1_SSPPCELLID1_MSB _u(7)
|
|
#define SPI_SSPPCELLID1_SSPPCELLID1_LSB _u(0)
|
|
#define SPI_SSPPCELLID1_SSPPCELLID1_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPCELLID2
|
|
// Description : PrimeCell identification registers, SSPPCellID0-3 on page 3-16
|
|
#define SPI_SSPPCELLID2_OFFSET _u(0x00000ff8)
|
|
#define SPI_SSPPCELLID2_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID2_RESET _u(0x00000005)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPCELLID2_SSPPCELLID2
|
|
// Description : These bits read back as 0x05
|
|
#define SPI_SSPPCELLID2_SSPPCELLID2_RESET _u(0x05)
|
|
#define SPI_SSPPCELLID2_SSPPCELLID2_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID2_SSPPCELLID2_MSB _u(7)
|
|
#define SPI_SSPPCELLID2_SSPPCELLID2_LSB _u(0)
|
|
#define SPI_SSPPCELLID2_SSPPCELLID2_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SPI_SSPPCELLID3
|
|
// Description : PrimeCell identification registers, SSPPCellID0-3 on page 3-16
|
|
#define SPI_SSPPCELLID3_OFFSET _u(0x00000ffc)
|
|
#define SPI_SSPPCELLID3_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID3_RESET _u(0x000000b1)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SPI_SSPPCELLID3_SSPPCELLID3
|
|
// Description : These bits read back as 0xB1
|
|
#define SPI_SSPPCELLID3_SSPPCELLID3_RESET _u(0xb1)
|
|
#define SPI_SSPPCELLID3_SSPPCELLID3_BITS _u(0x000000ff)
|
|
#define SPI_SSPPCELLID3_SSPPCELLID3_MSB _u(7)
|
|
#define SPI_SSPPCELLID3_SSPPCELLID3_LSB _u(0)
|
|
#define SPI_SSPPCELLID3_SSPPCELLID3_ACCESS "RO"
|
|
// =============================================================================
|
|
#endif // HARDWARE_REGS_SPI_DEFINED
|