Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
2,905 Commits 3 Branches 6 Tags 32 MiB
C 96.2%
Python 3.3%
C++ 0.3%
Go to file
Grigori Goronzy 0a20430e07 serial: Add Fysetc Cheetah board specific reset sequence 
Fysetc Cheetah v1.2 boards require a special sequence to reset reliably.
This sequence works for me in all cases. Simpler sequences without
double reset did not work correctly. This is likely because of a weird
stateful circuitry for toggling the bootloader state.

Cheetah boards use RTS to configure bootloader triggering. By default,
pySerial sets RTS on connect, which unfortunately configures the board
to start the bootloader on reset.

Add a toggle for the RTS state to allow users to workaround. The RTS state
is set before the serial connection is opened, so there are no glitches.

Addresses #2026.

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
 		2020-04-02 13:56:50 -04:00
config serial: Add Fysetc Cheetah board specific reset sequence 2020-04-02 13:56:50 -04:00
docs docs: Update FAQ with TMC2208 "standalone" mode workaround 2020-03-29 11:08:49 -04:00
klippy serial: Add Fysetc Cheetah board specific reset sequence 2020-04-02 13:56:50 -04:00
lib stm32f0: Remove hal based stm32f0 implementation 2020-01-14 17:08:01 -05:00
scripts update_mks_robin: Add script to update firmware for MKS Robin bootloader 2020-03-24 10:30:02 -04:00
src stm32: Add support for 64KiB bootloader on stm32f103 2020-03-24 10:02:21 -04:00
test config: Add example printer-alfawise-u30-2018.cfg config 2020-03-30 21:29:57 -04:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile Makefile: Use "tr -s" in compile_time_request.txt generation 2019-08-22 11:40:02 -04:00
README.md docs: Update main README file to point to website 2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

Klipper

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.