mirror of https://github.com/Desuuuu/klipper.git
137 lines
2.9 KiB
INI
137 lines
2.9 KiB
INI
# This file contains pin mappings for the Eryone Thinker Series V2.
|
|
# To use this config, the firmware should be compiled for the AVR atmega2560.
|
|
|
|
# Extra settings to support BL Touch, Filament Runout sensor, TMC2209 and
|
|
# have setting for fixing GCode errors, these configus can be found on
|
|
# Eryone's Facebook Group under files.
|
|
# Facebook like to files: https://www.facebook.com/groups/247271792709370/files
|
|
# Config file: printer.cfg.ThinkS-BLTouch-Runout-TMC2209-dapostol73.txt
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
[stepper_x]
|
|
step_pin: PC0
|
|
dir_pin: !PL1
|
|
enable_pin: !PA7
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: !PB6
|
|
position_min: -5
|
|
position_endstop: -5
|
|
position_max: 300
|
|
homing_speed: 50
|
|
|
|
[stepper_y]
|
|
step_pin: PC1
|
|
dir_pin: PL0
|
|
enable_pin: !PA6
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: !PB5
|
|
position_min: -5
|
|
position_endstop: -5
|
|
position_max: 300
|
|
homing_speed: 50
|
|
|
|
[stepper_z]
|
|
step_pin: PC2
|
|
dir_pin: PL2
|
|
enable_pin: !PA5
|
|
microsteps: 16
|
|
rotation_distance: 8
|
|
position_max: 400
|
|
homing_speed: 5
|
|
endstop_pin: !PB4
|
|
position_endstop: 0
|
|
|
|
[extruder]
|
|
step_pin: PC3
|
|
dir_pin: !PL6
|
|
enable_pin: !PA4
|
|
microsteps: 16
|
|
# Stock extruder [200 steps/rot]*[16 steps]/[93 steps/mm]
|
|
rotation_distance: 34.4
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.750
|
|
heater_pin: PH6
|
|
sensor_type: EPCOS 100K B57560G104F
|
|
sensor_pin: PF0
|
|
control: pid
|
|
pid_kp: 22.2
|
|
pid_ki: 1.08
|
|
pid_kd: 144
|
|
min_temp: 0
|
|
max_temp: 250
|
|
max_extrude_only_distance: 300
|
|
|
|
[fan]
|
|
pin: PH5
|
|
|
|
[heater_fan nozzle_cooling_fan]
|
|
pin: PH3
|
|
|
|
[heater_bed]
|
|
heater_pin: PE5
|
|
sensor_type: EPCOS 100K B57560G104F
|
|
sensor_pin: PF2
|
|
control: pid
|
|
pid_kp: 100.0
|
|
pid_ki: 5.023
|
|
pid_kd: 305.4
|
|
min_temp: 0
|
|
max_temp: 100
|
|
|
|
[mcu]
|
|
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
|
|
restart_method: command
|
|
|
|
[printer]
|
|
kinematics: cartesian
|
|
max_velocity: 300
|
|
max_accel: 1500
|
|
max_z_velocity: 5
|
|
max_z_accel: 150
|
|
|
|
######################################################################
|
|
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
|
######################################################################
|
|
|
|
[display]
|
|
lcd_type: st7920
|
|
cs_pin: EXP1_4
|
|
sclk_pin: EXP1_5
|
|
sid_pin: EXP1_3
|
|
encoder_pins: ^EXP2_3, ^EXP2_5
|
|
click_pin: ^!EXP1_2
|
|
#kill_pin: ^!EXP2_8
|
|
|
|
[output_pin beeper]
|
|
pin: EXP1_1
|
|
pwm: True
|
|
value: 0
|
|
shutdown_value: 0
|
|
cycle_time: 0.001
|
|
scale: 1000
|
|
|
|
# Enable 16 micro-steps on steppers X, Y, Z, E0
|
|
[static_digital_output stepper_config]
|
|
pins:
|
|
PG1, PG0,
|
|
PK7, PG2,
|
|
PK6, PK5,
|
|
PK3, PK4
|
|
|
|
[static_digital_output yellow_led]
|
|
pins: !PB7
|
|
|
|
# Common EXP1 / EXP2 (display) pins
|
|
[board_pins]
|
|
aliases:
|
|
# Common EXP1/EXP2 headers found on RAMBo v1.4
|
|
EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
|
|
EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
|
|
# EXP2 header
|
|
EXP2_1=PB3, EXP2_3=PK2, EXP2_5=PK1, EXP2_7=PD4, EXP2_9=<GND>,
|
|
EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
|
|
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
|