mirror of https://github.com/Desuuuu/klipper.git
231 lines
9.9 KiB
Python
231 lines
9.9 KiB
Python
# Z-Probe support
|
|
#
|
|
# Copyright (C) 2017-2018 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import pins, homing
|
|
|
|
HINT_TIMEOUT = """
|
|
Make sure to home the printer before probing. If the probe
|
|
did not move far enough to trigger, then consider reducing
|
|
the Z axis minimum position so the probe can travel further
|
|
(the Z minimum position can be negative).
|
|
"""
|
|
|
|
class PrinterProbe:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.speed = config.getfloat('speed', 5.0)
|
|
self.z_offset = config.getfloat('z_offset')
|
|
# Infer Z position to move to during a probe
|
|
if config.has_section('stepper_z'):
|
|
zconfig = config.getsection('stepper_z')
|
|
self.z_position = zconfig.getfloat('position_min', 0.)
|
|
else:
|
|
pconfig = config.getsection('printer')
|
|
self.z_position = pconfig.getfloat('minimum_z_position', 0.)
|
|
# Create an "endstop" object to handle the probe pin
|
|
ppins = self.printer.lookup_object('pins')
|
|
pin = config.get('pin')
|
|
pin_params = ppins.lookup_pin(pin, can_invert=True, can_pullup=True)
|
|
mcu = pin_params['chip']
|
|
mcu.add_config_object(self)
|
|
self.mcu_probe = mcu.setup_pin('endstop', pin_params)
|
|
if (config.get('activate_gcode', None) is not None or
|
|
config.get('deactivate_gcode', None) is not None):
|
|
self.mcu_probe = ProbeEndstopWrapper(config, self.mcu_probe)
|
|
# Create z_virtual_endstop pin
|
|
ppins.register_chip('probe', self)
|
|
self.z_virtual_endstop = None
|
|
# Register PROBE/QUERY_PROBE commands
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command(
|
|
'PROBE', self.cmd_PROBE, desc=self.cmd_PROBE_help)
|
|
self.gcode.register_command(
|
|
'QUERY_PROBE', self.cmd_QUERY_PROBE, desc=self.cmd_QUERY_PROBE_help)
|
|
def build_config(self):
|
|
kin = self.printer.lookup_object('toolhead').get_kinematics()
|
|
for stepper in kin.get_steppers('Z'):
|
|
stepper.add_to_endstop(self.mcu_probe)
|
|
def setup_pin(self, pin_type, pin_params):
|
|
if pin_type != 'endstop' or pin_params['pin'] != 'z_virtual_endstop':
|
|
raise pins.error("Probe virtual endstop only useful as endstop pin")
|
|
if pin_params['invert'] or pin_params['pullup']:
|
|
raise pins.error("Can not pullup/invert probe virtual endstop")
|
|
self.z_virtual_endstop = ProbeVirtualEndstop(
|
|
self.printer, self.mcu_probe)
|
|
return self.z_virtual_endstop
|
|
def last_home_position(self):
|
|
if self.z_virtual_endstop is None:
|
|
return None
|
|
return self.z_virtual_endstop.position
|
|
cmd_PROBE_help = "Probe Z-height at current XY position"
|
|
def cmd_PROBE(self, params):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
homing_state = homing.Homing(toolhead)
|
|
pos = toolhead.get_position()
|
|
pos[2] = self.z_position
|
|
try:
|
|
homing_state.homing_move(
|
|
pos, [(self.mcu_probe, "probe")], self.speed, probe_pos=True)
|
|
except homing.EndstopError as e:
|
|
reason = str(e)
|
|
if "Timeout during endstop homing" in reason:
|
|
reason += HINT_TIMEOUT
|
|
raise self.gcode.error(reason)
|
|
pos = toolhead.get_position()
|
|
self.gcode.respond_info("probe at %.3f,%.3f is z=%.6f" % (
|
|
pos[0], pos[1], pos[2]))
|
|
self.gcode.reset_last_position()
|
|
cmd_QUERY_PROBE_help = "Return the status of the z-probe"
|
|
def cmd_QUERY_PROBE(self, params):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
print_time = toolhead.get_last_move_time()
|
|
self.mcu_probe.query_endstop(print_time)
|
|
res = self.mcu_probe.query_endstop_wait()
|
|
self.gcode.respond_info(
|
|
"probe: %s" % (["open", "TRIGGERED"][not not res],))
|
|
|
|
# Endstop wrapper that enables running g-code scripts on setup
|
|
class ProbeEndstopWrapper:
|
|
def __init__(self, config, mcu_endstop):
|
|
self.mcu_endstop = mcu_endstop
|
|
self.gcode = config.get_printer().lookup_object('gcode')
|
|
self.activate_gcode = config.get('activate_gcode', "")
|
|
self.deactivate_gcode = config.get('deactivate_gcode', "")
|
|
# Wrappers
|
|
self.get_mcu = self.mcu_endstop.get_mcu
|
|
self.add_stepper = self.mcu_endstop.add_stepper
|
|
self.get_steppers = self.mcu_endstop.get_steppers
|
|
self.home_start = self.mcu_endstop.home_start
|
|
self.home_wait = self.mcu_endstop.home_wait
|
|
self.query_endstop = self.mcu_endstop.query_endstop
|
|
self.query_endstop_wait = self.mcu_endstop.query_endstop_wait
|
|
self.TimeoutError = self.mcu_endstop.TimeoutError
|
|
def home_prepare(self):
|
|
self.gcode.run_script_from_command(self.activate_gcode)
|
|
self.mcu_endstop.home_prepare()
|
|
def home_finalize(self):
|
|
self.gcode.run_script_from_command(self.deactivate_gcode)
|
|
self.mcu_endstop.home_finalize()
|
|
|
|
# Wrapper that records the last XY position of a virtual endstop probe
|
|
class ProbeVirtualEndstop:
|
|
def __init__(self, printer, mcu_endstop):
|
|
self.printer = printer
|
|
self.mcu_endstop = mcu_endstop
|
|
self.position = None
|
|
# Wrappers
|
|
self.get_mcu = self.mcu_endstop.get_mcu
|
|
self.add_stepper = self.mcu_endstop.add_stepper
|
|
self.get_steppers = self.mcu_endstop.get_steppers
|
|
self.home_start = self.mcu_endstop.home_start
|
|
self.home_wait = self.mcu_endstop.home_wait
|
|
self.query_endstop = self.mcu_endstop.query_endstop
|
|
self.query_endstop_wait = self.mcu_endstop.query_endstop_wait
|
|
self.home_prepare = self.mcu_endstop.home_prepare
|
|
self.TimeoutError = self.mcu_endstop.TimeoutError
|
|
def home_finalize(self):
|
|
self.position = self.printer.lookup_object('toolhead').get_position()
|
|
self.mcu_endstop.home_finalize()
|
|
|
|
# Helper code that can probe a series of points and report the
|
|
# position at each point.
|
|
class ProbePointsHelper:
|
|
def __init__(self, config, callback, default_points=None):
|
|
self.printer = config.get_printer()
|
|
self.callback = callback
|
|
self.probe_points = default_points
|
|
# Read config settings
|
|
if default_points is None or config.get('points', None) is not None:
|
|
points = config.get('points').split('\n')
|
|
try:
|
|
points = [line.split(',', 1) for line in points if line.strip()]
|
|
self.probe_points = [(float(p[0].strip()), float(p[1].strip()))
|
|
for p in points]
|
|
except:
|
|
raise config.error("Unable to parse probe points in %s" % (
|
|
config.get_name()))
|
|
if len(self.probe_points) < 3:
|
|
raise config.error("Need at least 3 probe points for %s" % (
|
|
config.get_name()))
|
|
self.horizontal_move_z = config.getfloat('horizontal_move_z', 5.)
|
|
self.speed = self.lift_speed = config.getfloat('speed', 50., above=0.)
|
|
# Lookup probe object
|
|
self.probe = None
|
|
self.probe_z_offset = 0.
|
|
manual_probe = config.getboolean('manual_probe', None)
|
|
if manual_probe is None:
|
|
manual_probe = not config.has_section('probe')
|
|
if not manual_probe:
|
|
self.printer.try_load_module(config, 'probe')
|
|
self.probe = self.printer.lookup_object('probe')
|
|
self.lift_speed = min(self.speed, self.probe.speed)
|
|
self.probe_z_offset = self.probe.z_offset
|
|
if self.horizontal_move_z < self.probe_z_offset:
|
|
raise config.error("horizontal_move_z can't be less than probe's"
|
|
" z_offset in %s" % (config.get_name()))
|
|
# Internal probing state
|
|
self.results = []
|
|
self.busy = False
|
|
self.gcode = self.toolhead = None
|
|
def get_lift_speed(self):
|
|
return self.lift_speed
|
|
def start_probe(self):
|
|
# Begin probing
|
|
self.toolhead = self.printer.lookup_object('toolhead')
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command(
|
|
'NEXT', self.cmd_NEXT, desc=self.cmd_NEXT_help)
|
|
self.results = []
|
|
self.busy = True
|
|
self.move_next()
|
|
if self.probe is not None:
|
|
try:
|
|
while self.busy:
|
|
self.gcode.run_script_from_command("PROBE")
|
|
self.cmd_NEXT({})
|
|
except:
|
|
self.finalize(False)
|
|
raise
|
|
def move_next(self):
|
|
x, y = self.probe_points[len(self.results)]
|
|
curpos = self.toolhead.get_position()
|
|
curpos[0] = x
|
|
curpos[1] = y
|
|
curpos[2] = self.horizontal_move_z
|
|
try:
|
|
self.toolhead.move(curpos, self.speed)
|
|
except homing.EndstopError as e:
|
|
self.finalize(False)
|
|
raise self.gcode.error(str(e))
|
|
self.gcode.reset_last_position()
|
|
cmd_NEXT_help = "Move to the next XY position to probe"
|
|
def cmd_NEXT(self, params):
|
|
# Record current position
|
|
self.toolhead.wait_moves()
|
|
self.results.append(self.callback.get_probed_position())
|
|
# Lift toolhead
|
|
curpos = self.toolhead.get_position()
|
|
curpos[2] = self.horizontal_move_z
|
|
try:
|
|
self.toolhead.move(curpos, self.lift_speed)
|
|
except homing.EndstopError as e:
|
|
self.finalize(False)
|
|
raise self.gcode.error(str(e))
|
|
# Move to next position
|
|
if len(self.results) == len(self.probe_points):
|
|
self.toolhead.get_last_move_time()
|
|
self.finalize(True)
|
|
return
|
|
self.move_next()
|
|
def finalize(self, success):
|
|
self.busy = False
|
|
self.gcode.reset_last_position()
|
|
self.gcode.register_command('NEXT', None)
|
|
if success:
|
|
self.callback.finalize(self.probe_z_offset, self.results)
|
|
|
|
def load_config(config):
|
|
return PrinterProbe(config)
|