klipper-dgus/lib/sam4e/include/instance/rtc.h

63 lines
4.6 KiB
C

/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
#ifndef _SAM4E_RTC_INSTANCE_
#define _SAM4E_RTC_INSTANCE_
/* ========== Register definition for RTC peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_RTC_CR (0x400E1860U) /**< \brief (RTC) Control Register */
#define REG_RTC_MR (0x400E1864U) /**< \brief (RTC) Mode Register */
#define REG_RTC_TIMR (0x400E1868U) /**< \brief (RTC) Time Register */
#define REG_RTC_CALR (0x400E186CU) /**< \brief (RTC) Calendar Register */
#define REG_RTC_TIMALR (0x400E1870U) /**< \brief (RTC) Time Alarm Register */
#define REG_RTC_CALALR (0x400E1874U) /**< \brief (RTC) Calendar Alarm Register */
#define REG_RTC_SR (0x400E1878U) /**< \brief (RTC) Status Register */
#define REG_RTC_SCCR (0x400E187CU) /**< \brief (RTC) Status Clear Command Register */
#define REG_RTC_IER (0x400E1880U) /**< \brief (RTC) Interrupt Enable Register */
#define REG_RTC_IDR (0x400E1884U) /**< \brief (RTC) Interrupt Disable Register */
#define REG_RTC_IMR (0x400E1888U) /**< \brief (RTC) Interrupt Mask Register */
#define REG_RTC_VER (0x400E188CU) /**< \brief (RTC) Valid Entry Register */
#else
#define REG_RTC_CR (*(RwReg*)0x400E1860U) /**< \brief (RTC) Control Register */
#define REG_RTC_MR (*(RwReg*)0x400E1864U) /**< \brief (RTC) Mode Register */
#define REG_RTC_TIMR (*(RwReg*)0x400E1868U) /**< \brief (RTC) Time Register */
#define REG_RTC_CALR (*(RwReg*)0x400E186CU) /**< \brief (RTC) Calendar Register */
#define REG_RTC_TIMALR (*(RwReg*)0x400E1870U) /**< \brief (RTC) Time Alarm Register */
#define REG_RTC_CALALR (*(RwReg*)0x400E1874U) /**< \brief (RTC) Calendar Alarm Register */
#define REG_RTC_SR (*(RoReg*)0x400E1878U) /**< \brief (RTC) Status Register */
#define REG_RTC_SCCR (*(WoReg*)0x400E187CU) /**< \brief (RTC) Status Clear Command Register */
#define REG_RTC_IER (*(WoReg*)0x400E1880U) /**< \brief (RTC) Interrupt Enable Register */
#define REG_RTC_IDR (*(WoReg*)0x400E1884U) /**< \brief (RTC) Interrupt Disable Register */
#define REG_RTC_IMR (*(RoReg*)0x400E1888U) /**< \brief (RTC) Interrupt Mask Register */
#define REG_RTC_VER (*(RoReg*)0x400E188CU) /**< \brief (RTC) Valid Entry Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#endif /* _SAM4E_RTC_INSTANCE_ */