# This file provides example configuration for DGUS T5UID1 touchscreens.

[t5uid1]
firmware: dgus_reloaded
#   This controls how Klipper interacts with the touchscreen. The only possible
#   value is "dgus_reloaded" at the moment. This parameter must be provided.
#update_interval: 2
#   How often to send data updates to the touchscreen.
#volume: 75
#   The volume for the touchscreen speaker (as a value from 0 to 100).
#brightness: 100
#   The brightness for the touchscreen (as a value from 0 to 100).
#machine_name: Generic 3D Printer
#   The machine name shown on the information page.
#boot_sound:
#   The index of the sound to play when booting. Defaults to being provided by
#   the selected firmware.
#notification_sound:
#   The index of the sound to play when certain events happened. Defaults to
#   being provided by the selected firmware.
#x_min_inset: 30.0
#   The distance (in mm) from the minimum X position used by the manual leveling
#   screen.
#x_max_inset: 30.0
#   The distance (in mm) from the maximum X position used by the manual leveling
#   screen.
#y_min_inset: 30.0
#   The distance (in mm) from the minimum Y position used by the manual leveling
#   screen.
#y_max_inset: 30.0
#   The distance (in mm) from the maximum Y position used by the manual leveling
#   screen.
#x_min:
#   This can be used to provide a lower limit (in mm) to X moves done using the
#   touschreen. Movements will still be limited by your [stepper_x]
#   configuration values.
#x_max:
#   This can be used to provide an upper limit (in mm) to X moves done using the
#   touschreen. Movements will still be limited by your [stepper_x]
#   configuration values.
#y_min:
#   Same as x_min for the Y axis.
#y_max:
#   Same as x_max for the Y axis.
#z_min:
#   Same as x_min for the Z axis.
#z_max:
#   Same as x_max for the Z axis.