8443c0b0f8
docs: a slight clarity improvement for the rPi mcu
...
Just a small attempt to make the build process slightly clearer
In the compilation instructions for the rPi mcu
Signed-off-by: Ben Eastep <shifting@shifting.ca>
2021-05-02 13:07:07 -04:00
8f76e53c0e
stepper: Remove min_stop_interval from mcu code
...
Now that the host never uses a min_stop_interval, remove it from the
mcu code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-30 11:26:19 -04:00
b1ea4f3bef
toolhead: Do not limit SET_VELOCITY_LIMIT to values specified in config
...
Allow a larger velocity, accel, and square_corner_velocity than what
is specified in the config file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-30 11:26:19 -04:00
e77bf7431e
docs: Move palette2 location in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-28 20:40:24 -04:00
ebbb21be00
docs: Update Status_Reference.md for better Jekyll rendering
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-28 20:38:07 -04:00
af7f27542f
docs: Move status field reference to new Status_Reference.md file
...
Move the reference of "printer" status fields from
Command_Templates.md to a new Status_Reference.md file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-28 20:32:00 -04:00
ed6ab6b9cc
screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant.
...
This is useful when a saved bed mesh is used to ensure that the bed level
has not drifted too far from where it was when the mesh was created.
Signed-off-by: Johannes Stuettgen <johannes.stuettgen@gmail.com>
2021-04-28 11:53:18 -04:00
d36dbfebd1
docs: Prefer Jinja2 "set" directive to default_parameter_xxx in examples
...
The "set" directive is more flexible and easier to understand.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-26 12:44:51 -04:00
61a25d2fb2
docs: Add example of Jinja2 "set" directive to Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-26 12:44:21 -04:00
475d8a72ad
docs: Add notes on terminating resistors to CANBUS.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-25 15:45:24 -04:00
2d2db0f839
probe: Add deactivate_on_each_sample: param for Probe ( #4161 )
...
Signed-off-by: Nick Lefskiy <n.lefskiy@yandex.ru>
2021-04-24 13:39:58 -04:00
200b62bcb4
adxl345: Verify the register writes, added debug adxl345 commands
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-04-24 13:15:17 -04:00
a58e9eddbe
docs: Note stealthchop can cause overcurrent error in TMC_Drivers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-24 12:30:27 -04:00
4ef713f6b8
docs: Update Linux RPi benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-18 13:21:31 -04:00
e7b0e7b43b
palette2: Add ping variation + ping status reports ( #4114 )
...
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
2021-04-14 11:37:24 -04:00
316b49c6bf
docs: Note that attribution/history should be avoiding in Example_Configs.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-13 21:14:46 -04:00
a93d09cdf4
docs: document bed mesh "faulty_regions"
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-04-10 11:16:07 -04:00
38b2805136
toolhead: Export the print_stalls value via get_status()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 20:44:27 -04:00
49a2b0354f
statistics: Export the OS and process load in a get_status() method
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 20:27:38 -04:00
cacf1197b6
docs: Minor changs to pca9533 in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 17:50:30 -04:00
eb4abdd830
pca9533: RGB support for the mightyboard ( #4150 )
...
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-09 17:47:16 -04:00
b1b2488538
docs: Minor display sectoin updates to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 13:07:40 -04:00
cf0c165361
Docs: Split the display section of Config_Reference.md into multiple sections
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 12:59:13 -04:00
26603e8369
docs: Minor copy-and-paste fix to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 12:02:18 -04:00
317402d5ba
hd44780_spi: added lcd support to the mightyboard ( #4121 )
...
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-07 21:07:23 -04:00
c59da22707
docs: Add link to Discourse server in Example_Configs.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-07 13:30:29 -04:00
00f8262e57
docs: Add links to Klipper Discourse server to Contact.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-27 12:51:17 -04:00
dc55142437
docs: Update FAQ on which mcus have hard pwm support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-26 12:39:47 -04:00
88f6061cd7
output_pin: Support setting max_duration ( #3995 )
...
Also added documentation for using powered tools.
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
2021-03-26 11:25:09 -04:00
e2a3217289
palette2: Add support for P2 devices ( #4057 )
...
Module which bring support for P2 devices running in connected mode. This enables using a Palette2 directly with Klippy without Octoprint, or without Palette2 plugins for Octoprint which are not functional out of the box with Klipper.
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
2021-03-26 11:21:10 -04:00
a0307c0e1c
docs: Fix Jekyll rendering of docs/TMC_Drivers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 12:24:45 -04:00
5c2c43b05f
docs: Revise sensorless homing configuration guide
...
Recommend finding the minimum and maximum stallguard settings while
tuning sensorless homing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 12:21:13 -04:00
dd4f2d81b6
docs: Deprecate support for the pin_map config option
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:50:56 -04:00
4f66a467e3
config: Create new sample-aliases.cfg with standard aliases
...
Create a sample-aliases.cfg with all the aliases that are currently
hardcoded in the klippy.pins.py module.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
36b1ccd598
replicape: Don't require a host alias for the enable_pin default
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
afe853aecc
github: Add github issue chooser
...
Add links to documentation and chat server when a new user opens a new
issue ticket.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-24 18:45:29 -04:00
905e49cc05
docs: Move Example_Configs.md reference in Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-22 22:12:26 -04:00
09067ddb52
docs: Updates to Example_Configs.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-22 22:01:30 -04:00
8524188203
docs: Add Example_Configs.md - info on adding new config files to Klipper
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-22 21:21:56 -04:00
8a3a32058f
docs: Added a note about different ADLX345 PCB designs
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-03-20 13:24:43 -04:00
b6908e56aa
docs: Updated measuring resonances doc on max_accel suggestions
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-03-20 13:24:43 -04:00
c8dc3afc23
docs: Update TMC_Drivers.md with note on SPI failures on TMC driver checks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-16 14:49:29 -04:00
0ddd6e8d21
docs: Add common reasons for tmc error reports to TMC_Drivers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-16 12:14:45 -04:00
b4437f8eee
bme280: Add support for BMP280 and BME680 sensors ( #4040 )
...
This adds support for BMP280 and BME680 sensor ICs,
along with fixing calibration data readout for BME280.
Gas sensor readout for the BME680 is just the raw compensated value.
To get actual meaningful values, more research is needed.
Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2021-03-15 11:50:29 -04:00
bf8f7133b4
filament_motion_sensor: Add filament_motion_sensor ( #3857 )
...
Add functionality to support a Filament Motion Sensor for detecting extruder jams as well as runouts. Works by an encoder toggling the switch_pin 0/1 as the filament is pulled through the sensor.
Signed-off-by: Joshua Wherrett <thejoshw.code@gmail.com>
2021-03-14 21:36:19 -04:00
c7dc3e78bf
docs: Update CAN bus documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-13 11:33:56 -05:00
6cb419a90a
canbus: Rework CAN command protocol
...
Rework the micro-controller command protocol so that it supports
direct communication with the serialqueue.c code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-13 11:29:41 -05:00
041692828c
mcu: Add support for connecting to devices on a CAN bus
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-13 11:29:41 -05:00
11b9b72b41
docs: Minor wording change to TMC_Drivers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-11 17:57:18 -05:00
715b89ce0c
docs: Rename Sensorless_homing.md to TMC_Drivers.md and extend
...
Add additional information on configuring and using TMC drivers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-10 20:09:34 -05:00
shiftingtech
Kevin O'Connor
Johannes Stuettgen
nlef
Dmitry Butyugin
Clifford Roche
Arksine
le-Bark
Pascal P
Michael Kurz
TheJoshW