65afad9428
neopixel: report color data via get_status() method
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-06-18 10:53:12 -04:00
c148f17ea3
neopixel: add sync parameter to prevent waking toolhead ( #4339 )
...
neopixel: add sync param to prevent waking toolhead
dotstar: refactor to match neopixel methods and add sync parameter
Signed-off-by: Paul McGowan <mental405@gmail.com>
2021-06-02 10:51:45 -04:00
f3fd814ce0
neopixel: Don't wait for responses when in debug mode.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 11:36:37 -05:00
9e1697786d
neopixel: Apply LED updates at time of transmission
...
Queue updates so that delays between updates are properly applied.
This fixes macros that would blink LEDs by pausing between update
commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-05 12:57:14 -05:00
123908ac7a
neopixel: Fix neopixel_result message so that it contains an oid
...
In order for commit 82156170
2020-11-05 11:40:34 -05:00
821561708d
neopixel: Fix failure with multiple simultaneous neopixel updates
...
Make sure to set the oid parameter of mcu.lookup_query_command() so
responses are routed correctly.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-04 18:47:36 -05:00
79877acb14
mcu: Add support for setting reqclock in CommandQueryWrapper.send()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-29 12:00:28 -04:00
6133737215
neopixel: Don't flush the lookahead queue on a SET_LED command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-29 12:00:28 -04:00
7263077db5
neopixel: Add support for RGBW LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-29 12:00:25 -04:00
2bb30265b5
neopixel: Increase the maximum LED chain length
...
Rework neopixel updates to use an mcu buffer so that more than 18 LEDs
can be in a chain.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-29 11:59:15 -04:00
0fd12609a6
neopixel: Use new GCodeCommand wrappers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-05 11:08:12 -04:00
0ae20421d1
neopixel: Allow host software to configure neopixel timing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-15 13:29:43 -04:00
254789f4c5
neopixel: Add support for delaying updates in SET_LED command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-15 23:24:17 -05:00
a3980cebcc
neopixel: Add support for WS2811 RGB pixel color order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:58:49 -04:00
f6d1ab2ea2
neopixel: Rework timing so that it works on AVR micro-controllers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-07 15:37:05 -04:00
115b888106
neopixel: Use low priority for LED updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 22:25:26 -04:00
4c09d8bf02
dotstar: Initial support for "dotstar" LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 19:44:32 -04:00
46041f5411
neopixel: Add support for daisy-chained chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
abf3fa4b71
neopixel: Add support for setting a default color at startup
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
e3c5638147
neopixel: Warn that the neopixel isn't currently supported on AVR
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-17 16:54:47 -04:00
d5cc2a7b7b
neopixel: Improve timing of gpio bit-banging
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-17 16:36:28 -04:00
be2d0abbab
neopixel: Optimize the update loop
...
Optimize the transmit code so it can run on some slower ARM cpus.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 23:39:00 -04:00
b7bc96c3b2
neopixel: Add initial support for "neopixel" leds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 21:44:01 -04:00
Arksine
Paul McGowan
Kevin O'Connor