Commit Graph

15 Commits

Author SHA1 Message Date
Kevin O'Connor 7dd2bf4af3 tmc2130: Verify SPI register writes
The tmc2130 (and tmc5160) will respond back with the value written
during the next SPI command.  Use this feature to verify that the
value written matches the value sent.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-10 17:12:25 -05:00
Marco D'Alessio c7688c6bca tmc2130: Add spi daisy chain support
This patch adds the ability to daisy-chain multiple tmc2130 and
tmc5160 drivers.

Signed-off-by: Marco D'Alessio <marco@wrecklab.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-26 10:54:47 -05:00
Kevin O'Connor 245917bf03 mcu: Introduce new lookup_query_command() command wrapper
Use new mcu.lookup_query_command() for all commands that query
information from the micro-controller.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-20 13:24:53 -05:00
Kevin O'Connor 395429be14 pins: Move reserved pin handling into PinResolver class
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:57:59 -04:00
Kevin O'Connor 05bb5484b4 bus: Add MCU_bus_digital_out helper class
Add a helper class for tracking gpio outputs that are synchronized to
bus updates on a particular command queue.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 22:14:02 -04:00
Kevin O'Connor c2a08962b7 spicmds: Rework spi config commands
Rework the spi_config commands so that bus configuration and shutdown
message configuration is done separately from the main "config_spi"
command.  This makes the spi configuration more flexible.  It's now
possible to use software spi without a CS pin.  It's now possible to
define multiple SPI messages to send on a shutdown event.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 18:56:53 -04:00
Kevin O'Connor d7e1061c63 bus: Don't reserve any pins if BUS_PINS_x is not defined
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-07 20:43:23 -04:00
Kevin O'Connor 1ab02e5225 bus: Support bus enumerations and add support for reserved pins
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor 4c3d50693e bus: Change bus parameter in config_spi/config_i2c
Be explicit when using an spi_bus vs i2c_bus in the parameter name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor 98ed462865 spi_software: Implementation of software spi
Signed-off-by: Matt Janus <FragginRight@variabl.es>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 11:52:20 -05:00
Kevin O'Connor e26d1a3567 i2ccmds: Pass the i2c address as a 7-bit number (0-127)
The sam3 i2c code and the linux code use a 7-bit i2c address, while
the avr, lpc176x, and samd21 i2c code uses an 8-bit address with the
least significant bit always zero.  A similar issue occurred in the
host code (sx1509.py and replicape.py use 7-bit addresses while
uc1701.py and mcp4451.py use 8-bit addresses).

Consistently use 7-bit addresses in all the code.  This breaks
compatibility between host and mcu software, so make a change to the
config_i2c command to force users to synchronize software updates.
This also breaks common Smoothieboard configs, so update the mcp4451
code to validate the i2c_address.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 20:00:44 -05:00
Kevin O'Connor c3efcd9c8d bus: Set all SPI CS pins high before first config_spi message
If an SPI device is shared among many devices, then all the device's
CS pins should be set high prior to setting up the clk pin.
(Otherwise, there's a chance a device could interpret the clk pin
setup as part of a transmission.)

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-04 22:26:34 -05:00
Kevin O'Connor 1be24b8fc7 bus: Don't raise a "duplicate pin" warning on None pins
If "None" is used for an spi cs pin, then it should not reserve "None"
for other uses.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-02 17:37:39 -05:00
Kevin O'Connor e5150fe187 uc1701: Add support for SSD1306 in i2c mode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-23 22:04:06 -05:00
Kevin O'Connor 58890e32a2 bus: Add klippy/extras/bus.py module with SPI bus helper code
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-21 12:12:31 -05:00