Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
4,542 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

2344 Commits

Author SHA1 Message Date
Kevin O'Connor de14d106a1 shaper_calibrate: Add missing import 
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-23 21:49:50 -04:00
Martin Hierholzer 7793784640 spicmds: Allow inversion of CS pin for SPI busses 
Signed-off-by: Martin Hierholzer <martin@hierholzer.info>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-22 13:25:03 -04:00
Kevin O'Connor fb3bae4531 neopixel: Simplify color_order parsing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 12:55:32 -04:00
Kevin O'Connor 260fd7d367 pca9632: Fix color_order assignment 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 11:07:05 -04:00
Kevin O'Connor fb02e2b577 neopixel: Fix color_order assignment 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 10:55:35 -04:00
Kevin O'Connor 5f0885958d neopixel: Support chains with a mix of color_order 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 10:16:10 -04:00
Kevin O'Connor 53a7f1dd76 led: Remove has_white check from LEDHelper 
There is no harm in checking for a white config setting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 09:34:25 -04:00
Kevin O'Connor 630d3b3444 led: Fix SET_LED TRANSMIT=1 handling 
If the final update in a series of SET_LED update commands didn't
alter a color than the transmit would not occur - even if prior
commands did make color changes.  Refactor the update code and fix.

Reported by @mstansberry.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 08:55:21 -04:00
Uli 240f8ea60b
htu21d: SI7021 is has id 0x15 (#5375) 
This is most probably the result of a copy paste error. All vendor documentation for SI7021 (e.g. https://www.silabs.com/documents/public/data-sheets/Si7021-A20.pdf) points to 21 and it actually only works when adapted to 0x15 (=21).

Signed-off-by: Uli Wolf <github+klipper@wolf-u.li>
 2022-04-11 10:33:41 -04:00
Dmitry Butyugin 76b22b3125 smart_effector: Initial support of programmable SmartEffector 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-04-09 19:04:57 -04:00
Kevin O'Connor 22297229b7 temperature_fan: Fix divide by zero error when pid_Ki is zero 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 12:11:54 -04:00
Kevin O'Connor 647a1cd8ca temperature_fan: Remove deprecated pid_integral_max option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 12:10:48 -04:00
Kevin O'Connor 555ac58a3f pca9632: Add support for configurable color_order 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 11:48:25 -04:00
Kevin O'Connor f0700c0985 pca9632: Support using hardware I2C 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 11:43:52 -04:00
Kevin O'Connor dc7b02f329 neopixel: Support arbitrary RGBW strings in color_order config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-06 09:27:36 -04:00
Kevin O'Connor e6bfc4c9aa led: Support setting display_template parameters via SET_LED_TEMPLATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 1ab3ac39e4 led: Support automated LED updates based on display_template results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor a6ab56c0a6 display: Add a new PrinterDisplayTemplate class for tracking template macros 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 2001eecd5e pca9533: Add support for 4 brightness levels 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 47828b4056 pca9533: Update to use LEDHelper class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 271c2ac95b pca9632: Update to use LEDHelper class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 0c425cf014 mcp4018: Support setting minclock and reqclock in SoftwareI2C class 
This is in preparation for pca9632 changes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 9136a29196 dotstar: Update to use LEDHelper class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 8b8818c0f7 neopixel: Update to use LEDHelper class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 96795def9c led: Add support for PWM controlled LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor c08f83ff47 pid_calibrate: Improve Python3 compatibility in debug file output 
Reported by @kpishere.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:37:03 -04:00
Kevin O'Connor 4d1c3478ab angle: Add support for reading tle5012b chip registers (for debugging) 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 1275281ab6 angle: Initialize tle5012b chip variants to same configuration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 1b08553a42 angle: Report tle5012b temperature 
Export the tle5012b temperature readings when performing measurements.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor f9d505e376 sensor_angle: Support TLE5012b frame counter for timing 
Use the tle5012b internal frame counter to calculate the time of each
measurement.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor aec742ece4 angle: Initial support for angle sensor calibration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 74937326d3 sensor_angle: Add support for bulk querying of spi angle sensors 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Alex Maclean 8049243221 atsam: Add support for SAM E70 
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
 2022-03-26 11:59:27 -04:00
Justin Schuh 1390b4d600 virtual_sdcard: Allow spaces in file path for M23 
Also makes M23 work normally with rename_existing.

Signed-off-by: Justin Schuh <code@justinschuh.com>
 2022-03-18 11:44:33 -04:00
Kevin O'Connor 98d3fffd79 palette2: Fix typo (gmcd vs gcmd) 
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-17 20:53:07 -04:00
Kevin O'Connor a43973b0e0 skew_corrections: Fix typo (gmcd vs gcmd) 
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-17 20:52:10 -04:00
Ricardo Alcântara 0761026e36
pca9632: LED module for FlashForge Dreamer 3D printer (#4654) 
Added PCA9632 LED module support using software I2C from MCP4018
modulo drive the LED strip of a FlashForge Dreamer 3D printer.
Based on the PCA9533 module. 

Signed-off-by: Ricardo Alcantara <ricardo@vulcanolabs.xyz>
 2022-03-14 14:28:42 -04:00
Stefan Dej 12e304fbec temperature_fan: add missing round function to get_status temperature 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2022-03-14 13:48:38 -04:00
electron2410 02d770ae3c
neopixel: add BGR for neopixel (#5160) 
Signed-off-by: Thomas Liebold <electron2410@gmail.com>
 2022-03-14 12:30:58 -04:00
Pedro Lamas 38b992532a display_status: stops M73 from setting progress to 0 if P missing 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-03-08 14:20:35 -05:00
Kevin O'Connor fe2974b8ec extruder: Verify trapq is unmodified on default SET_PRESSURE_ADVANCE 
Check that a SET_PRESSURE_ADVANCE without an explicit EXTRUDER
parameter isn't done after the user disables or reassociates the
extruder stepper motor (via SYNC_EXTRUDER_MOTION).  Otherwise, it
could lead to very confusing results.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-04 13:38:59 -05:00
Kevin O'Connor 4815a946c2 extruder_stepper: Do not default to synching with "extruder" at startup 
With recent changes, the extruder_stepper may be used for new
purposes, and synchronizing to the "extruder" motion queue at startup
may become a confusing default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-04 13:38:59 -05:00
Kevin O'Connor 6627d036ac extruder: Allow an extruder object to be created without a stepper 
This may be useful for dual hotend printers that have only one
stepper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-04 13:20:35 -05:00
Andrei Ignat 682d38f590
delta: Multiple steppers on delta tower (#5217) 
Updated tower rail setup to support multiple steppers per tower.

Signed-off-by: Andrei Ignat <andrei@ignat.se>
 2022-02-28 23:14:25 -05:00
Andrei Ignat bbd1ddadd1
corexy: Multiple steppers per axis on CoreXY (#4886) 
Allowing multiple steppers per axis.

Signed-off-by: Andrei Ignat <andrei@ignat.se>
 2022-02-28 23:11:50 -05:00
Lorenzo 7c964e5fdf
dac084S085: SPI DAC DAC084S085 implementation (#5134) 
Alligator Board Rev2 tested config sample.
Add example configuration file for Alligator board rev.3.

Signed-off-by: Lorenzo Franco <lorenzo.franco@lorenzing.com>
 2022-02-22 10:28:28 -05:00
Kevin O'Connor b0a24a4458 motion_report: Ensure startstop_cb is called atomically 
Make sure APIDumpHelper() does not invoke the startstop callback while
it is already running.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-02-21 22:22:14 -05:00
Misterke 8b0c6fcb08 bed_mesh: Report actual mesh profiles as status 
Report the actual profiles available via BED_MESH_PROFILE
via the status for use by clients.

Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
 2022-02-16 13:42:19 -05:00
Kevin O'Connor 1c594ef27a bed_mesh: Fix integer division issue on Python3 
Reported by @CODeRUS.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-02-10 14:09:15 -05:00
Kevin O'Connor 2e17519a7e extruder: Deprecate old extruder commands and shared_heater config option 
Deprecate SET_EXTRUDER_STEP_DISTANCE and SYNC_STEPPER_TO_EXTRUDER.
Recommend using SET_EXTRUDER_ROTATION_DISTANCE and
SYNC_EXTRUDER_MOTION.

Deprecate the extruder "shared_heater" option and reocmmend using
extruder_stepper config sections to obtain the same functionality.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-02-10 13:25:16 -05:00