Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
4,542 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

944 Commits

Author SHA1 Message Date
Kevin O'Connor e43fd4fab0 docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-29 13:58:05 -04:00
Kevin O'Connor 1eb6afdbe5 docs: List only micro-controller names in benchmarks table in Features.md 
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards".  This was not the intent.

Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-29 12:20:41 -04:00
Kevin O'Connor 07a90902a5 docs: Improve wording of screws_tilt_adjust in Config_Reference.md 
Reported by @JamesH1978.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-23 21:22:02 -04:00
Kevin O'Connor a02da85101 docs: Fix typo in query_adc section of G-Codes.md 
Reported by @jakep82.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-21 19:20:46 -04:00
Kevin O'Connor 5f0885958d neopixel: Support chains with a mix of color_order 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-18 10:16:10 -04:00
alstoepp 44567879f6
stm32: Add STM32F072 16KiB bootloader option (#5404) 
Signed-off-by: Alexander Stöpperger <a.stoepperger@gmx-topmail.de>
 2022-04-13 11:22:04 -04:00
Kevin O'Connor 4a8a76ead8 docs: Update temperature_fan PID documentation in Config_Reference.md 
Reported by @dewi-ny-je.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-11 11:46:24 -04:00
Karl Bowden 5d82be2f5d
docs: Add link to linux mcu neopixels config docs (#5402) 
The reference to the linux mcu was helpful to understand what a linux mcu was but didn't help with understanding the technical reasons why it's not supported.

Signed-off-by: Karl Bowden <karl@bearded.sexy>
 2022-04-11 10:35:38 -04:00
Kevin O'Connor 4d4c8d8f94 docs: Add link to Moonraker in API_Server.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-09 19:32:38 -04:00
Kevin O'Connor 6e61e47a23 docs: Fix smarteffector link in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-09 19:13:30 -04:00
Kevin O'Connor 05330fd3e5 docs: Minor updates to SmartEffector docs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-09 19:10:16 -04:00
Dmitry Butyugin 2060a6908f smart_effector: Config and command reference 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-04-09 19:04:57 -04:00
cbc02009 f3b995227a
docster: Fix incorrect default value for max_freq 2022-04-09 16:31:23 -04:00
Kevin O'Connor 7c5b7191c3 docs: Update wording of "quality improvement" section of CONTRIBUTING.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-08 09:56:22 -04:00
Kevin O'Connor 5a409d5d31 docs: Provide more information on PID in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 12:30:02 -04:00
Kevin O'Connor 647a1cd8ca temperature_fan: Remove deprecated pid_integral_max option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 12:10:48 -04:00
Kevin O'Connor 555ac58a3f pca9632: Add support for configurable color_order 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 11:48:25 -04:00
Kevin O'Connor f0700c0985 pca9632: Support using hardware I2C 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-07 11:43:52 -04:00
Yifei Ding 61792e3e31 _klipper3d: Specify mkdocs language config options 
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-06 19:04:48 -04:00
Yifei Ding b35b6cb10b _klipper3d: New language translation deployment 
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-06 19:04:48 -04:00
Kevin O'Connor 444d209cce _klipper3d: Remove translation stubs 
Support for language translations on the klipper3d.org site was
disabled in commit c067d4df.  Fully remove the support in this commit.
This is in preparation for an alternate implementation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-06 19:04:48 -04:00
Kevin O'Connor dc7b02f329 neopixel: Support arbitrary RGBW strings in color_order config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-06 09:27:36 -04:00
Kevin O'Connor 92de6e91dc docs: Note that "minutes" in screws_tilt_adjust means minutes of a clock face 
Reported by @kubik369 and @Sineos.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-05 20:35:56 -04:00
Kevin O'Connor e6bfc4c9aa led: Support setting display_template parameters via SET_LED_TEMPLATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 1ab3ac39e4 led: Support automated LED updates based on display_template results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 35ff49e546 docs: Note that neopixel doesn't work on "linux mcu" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor a7f69caa37 docs: Note change to neopixel/dotstar API status fields 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 96795def9c led: Add support for PWM controlled LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 3340bb2ffd docs: Add explicit Jinja2 prerequisite to mkdocs-requirements.txt 
Avoid build failures by adding explicit Jinja2 version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:40:48 -04:00
Kevin O'Connor 4d1c3478ab angle: Add support for reading tle5012b chip registers (for debugging) 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 1b08553a42 angle: Report tle5012b temperature 
Export the tle5012b temperature readings when performing measurements.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor aec742ece4 angle: Initial support for angle sensor calibration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 74937326d3 sensor_angle: Add support for bulk querying of spi angle sensors 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Charles Pickering 7e654aed2f docs: Fix config snippet for polar 
Previously the section for stepper_bed was intertwined with printer. This commit makes it match (../config/example-polar.cfg).

Signed-off-by: Charles Pickering <me@charlespick.xyz>
 2022-03-20 11:43:32 -04:00
Kevin O'Connor b4b19b8fc1 docs: Add a link to Rotation_Distance.md in Example_Configs.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-17 21:50:33 -04:00
Kevin O'Connor d7f8bf351f docs: Fix section headers of [display] sections in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-16 12:04:41 -04:00
Ricardo Alcântara 0761026e36
pca9632: LED module for FlashForge Dreamer 3D printer (#4654) 
Added PCA9632 LED module support using software I2C from MCP4018
modulo drive the LED strip of a FlashForge Dreamer 3D printer.
Based on the PCA9533 module. 

Signed-off-by: Ricardo Alcantara <ricardo@vulcanolabs.xyz>
 2022-03-14 14:28:42 -04:00
electron2410 02d770ae3c
neopixel: add BGR for neopixel (#5160) 
Signed-off-by: Thomas Liebold <electron2410@gmail.com>
 2022-03-14 12:30:58 -04:00
Kevin O'Connor 30098db22a docs: Fix typo in RPi_microcontroller.md 
Reported by @bradengel.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-14 00:38:25 -04:00
Kevin O'Connor 1de0d75079 docs: Move "benefits" review section up in CONTRIBUTING.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:13:55 -04:00
Fritz Webering 24e7bbf0df
docs: Add missing bltouch lift_speed option to Config_Reference.md (#5344) 
Signed-off-by: Fritz Webering <fritz@webering.eu>
 2022-03-11 13:35:08 -05:00
Kevin O'Connor c721c20c97 docs: Improve G-Codes.md description of extruder commands 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-08 15:34:11 -05:00
Pedro Lamas 38b992532a display_status: stops M73 from setting progress to 0 if P missing 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-03-08 14:20:35 -05:00
Kevin O'Connor 4815a946c2 extruder_stepper: Do not default to synching with "extruder" at startup 
With recent changes, the extruder_stepper may be used for new
purposes, and synchronizing to the "extruder" motion queue at startup
may become a confusing default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-04 13:38:59 -05:00
Kevin O'Connor 6627d036ac extruder: Allow an extruder object to be created without a stepper 
This may be useful for dual hotend printers that have only one
stepper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-04 13:20:35 -05:00
Kevin O'Connor 4a8aece6a7 docs: Note g-code output is not intented to be parsed in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-03 22:20:27 -05:00
Kevin O'Connor c31f981575 docs: Add link to GET_POSITION description in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-03 21:48:57 -05:00
Kevin O'Connor 9e15321418 docs: Minor wording change to Example_Configs.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-02-21 12:20:21 -05:00
Kevin O'Connor 7202a5da8e docs: Minor wording change in Example_Configs.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-02-21 12:17:30 -05:00
Kevin O'Connor 74dbd8a8e4 docs: Fix Example_Configs.md list rendering 
Mkdocs doesn't support a third level of list nesting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-02-21 12:14:59 -05:00