Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
1,678 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

1678 Commits

Author SHA1 Message Date
Florian Heilmann b98e12c19a sx1509: Relax restrictions on SX1509 pins (#836) 
This allows SX1509 pins to be used as temperature fans and heater fans. Heaters are still disallowed.

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-30 18:08:12 -04:00
Florian Heilmann 3328ade194 tmc2660: Fix typo in TMC2660 extra (#830) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-29 12:44:45 -04:00
Kevin O'Connor 8432f6f40c avr: Add support for atmega328p 
The atmega328p is basically the same as the atmega328 - add explicit
support for it so that avrdude doesn't complain while flashing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-29 11:55:15 -04:00
Florian Heilmann 90bc3be6a0 Add DUMP_TMC capabilities to the TMC2660 extra 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-28 18:45:49 -04:00
Florian Heilmann 4372d1812c Implement idle event support in the TMC2660 extra 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-28 18:45:49 -04:00
Kevin O'Connor d25e02144c idle_timeout: Add printing/ready/idle tracking 
Internally track the overall printer state.  Generate events on state
transitions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 18:39:45 -04:00
Kevin O'Connor a5e55c2acc gcode: process_batch() should execute commands atomically 
Update the process_batch() method so that it will not interleave
commands read from the input fd with the batched commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 18:39:45 -04:00
Kevin O'Connor 37b9a2442f config: Add lcd encoder pins to generic-rumba.cfg 
Reported by @elJosho.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 14:34:22 -04:00
Kevin O'Connor c4058f71fb docs: Clarify M109/M190 in G-Code documentation 
Signed-off-by: Lucas Fink <software@lfcode.ca>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 14:22:30 -04:00
Kevin O'Connor 057acb07b7 docs: Add a Slicers.md document 
Add some information on configuring a slicer for use with Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 10:47:32 -04:00
Kevin O'Connor 47e45ab391 docs: Note the use of gcode_macro in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 10:38:03 -04:00
Kevin O'Connor 4f89251f03 sx1509: Raise an error if a pin max_duration is not zero 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-27 12:22:23 -04:00
Kevin O'Connor c3f916c60e delta: Make sure to clear limit_xy2 after a homing move 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-27 11:54:17 -04:00
Kevin O'Connor 936a4acd0d delta: Make sure to also exempt the homing retract move from boundary checks 
Commit 459e5219 added a special case to the boundary checks to permit
homing moves.  In some cases, the second home retract could also be
outside the normal boundary checks - extend the special case to also
permit that move.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-27 11:43:24 -04:00
lf a33792f07e util: Fix versioning when gitdir is absent (#809) 
The gitdir previously could be absent and produce a version of "" in
spite of checks for it. Fixed.

Parent directories with shlex-interpreted characters in their names
could be misinterpreted. Removed shlex parsing.

Packagers may want to remove the git history to slim down the package
size, so add an option for using a file 'version' in the klippy
directory to set version without using git.

Signed-Off-By: Lucas Fink <software@lfcode.ca>
 2018-10-27 10:44:38 -04:00
Florian Heilmann f57c29442c Add SX1509 extra 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-27 10:34:28 -04:00
Florian.Heilmann 99989a668f Implement I2C support in the SAM4E8E port 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-27 10:34:28 -04:00
Florian.Heilmann 5a919c892a Add generic i2c interface 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-27 10:34:28 -04:00
Kevin O'Connor 24bbc43fd0 config: Add encoder pins to printer-anycubic-kossel-plus-2017.cfg 
Reported by @obalado.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 21:34:49 -04:00
Kevin O'Connor 97590b8e0b extruder: Don't use max_extrude_cross_section in max_extrude_only defaults 
Some users increase max_extrude_cross_section to avoid issues with
some slicers.  However, increasing that value also increases the
defaults for the max_extrude_only parameters which is not obvious.
Base the max_extrude_only defaults only on the configured nozzle
diameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 19:09:47 -04:00
Kevin O'Connor ed13c5733d config: Update wording of extruder parameters in example.cfg 
Try to improve the description of the extruder config limits.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 19:09:47 -04:00
Kevin O'Connor a7c8476e98 docs: Update pressure advance doc to note it only impacts the extruder 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 19:09:47 -04:00
Kevin O'Connor 3d7e8fa5ec docs: Note impact of warping during pressure advance tuning 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 12:10:47 -04:00
Kevin O'Connor ca7dd8bfd4 docs: Update Pressure_Advance.md - don't set square_corner_velocity=0 
Setting the square corner velocity to zero would cause stuttering
during the test if a bed mesh is in effect.  It's possible to get the
desired effect by reducing the square corner velocity and setting the
pressure advance lookahead time instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 11:43:03 -04:00
Kevin O'Connor 363bcfb233 logextract: Make sure config files end with a newline 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-24 16:02:03 -04:00
Florian Heilmann b6bf455155 tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-24 16:01:12 -04:00
Kevin O'Connor 1a437c1fd1 sam3x8e: Don't report an error if bossac errors during device restart 
Sometime bossac reports an error during chip restart.  It appears this
error is spurious - just suppress it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 17:41:29 -04:00
Kevin O'Connor 04a12ec9bd docs: Update stm32f1.md - usb is now supported. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 13:22:58 -04:00
Kevin O'Connor e4bb90a1ca bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor f382762962 bed_tilt: Do not automatically run G28 on BED_TILT_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor 925562cfb1 delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor ca04caa42c docs: Fix SAM4E8E benchmark test revision 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:21:43 -04:00
Kevin O'Connor 2b81b2935c docs: Update SAM4E8E benchmarks 
New benchmark numbers reported by @FHeilmann.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:18:55 -04:00
Kevin O'Connor 34c3cb5c01 sam4e8e: Enable SAM4 cache at startup 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:16:18 -04:00
Kevin O'Connor 7fac0de1f8 config: Add display buttons to printer-creality-cr10s-2017.cfg 
Reported on IRC by gueee.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-20 19:27:53 -04:00
Kevin O'Connor b903f84c80 docs: Replace get_status example with get_clock in Protocol.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-20 11:53:32 -04:00
Kevin O'Connor 7efbc021a5 pid_calibrate: Add some comments on the calibration methodology 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-19 22:40:11 -04:00
Kevin O'Connor e30053f2a9 test: Add printer-adimlab-2018.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-19 11:12:20 -04:00
Jason Rahaim c7f0d039ac config: ADIMlab Add support for LCD knob and caselight 
Signed-off-by: Jason Rahaim <jason@jasonr.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-19 11:10:32 -04:00
Kevin O'Connor 29e0996858 display: Check for M117 inside of draw_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-18 20:43:43 -04:00
Kevin O'Connor 2549ccd722 klippy: No need to return anything from _connect() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-18 15:58:52 -04:00
Kevin O'Connor 530a37196c docs: Update LPC176x benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-18 09:55:02 -04:00
Kevin O'Connor 8fca908445 lpc176x: Divide system clock within timer; not on system bus 
Scaling the timer on the system bus has a notable impact on
performance.  So, scale the timer within the timer hardware itself.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-18 09:37:47 -04:00
Kevin O'Connor 0079311b0b docs: Add an Endstop_Phase.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:49 -04:00
Kevin O'Connor 1e71909d02 endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:49 -04:00
Kevin O'Connor def524bdf4 endstop_phase: Add support for detecting phase via TMC stepper drivers 
The Trinamic stepper motor drivers are capable of reporting the
stepper phase - add support for using that capability to the
enddstop_phases module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:23 -04:00
Kevin O'Connor a2df01b88e endstop_phase: Move endstop phase homing code to new "extras" module 
Move the endstop phase tracking code from stepper.py to a new
extras/endstop_phase.py module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:23 -04:00
Kevin O'Connor 216905ceca klippy: Add a basic event dispatch mechanism 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:23 -04:00
Kevin O'Connor fedf90680e homing: Pass printer instead of toolhead object to Homing class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:23 -04:00
lf e7498fa241 chelper: Add a quick __main__ to compile c helper (#782) 
Signed-off-by: Lucas Fink <software@lfcode.ca>
 2018-10-16 12:21:18 -04:00