549e682069
docs: Add sam4s8c benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:43:56 -05:00
70bbdf9334
sam3: Rename src/sam3x8e to src/sam3
...
This is in preparation for merging sam3 and sam4 code into one
directory.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:33:26 -05:00
c8e04274ad
docs: Add a FAQ item for "multiple instances of klipper on the same machine"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 13:59:52 -05:00
d015209388
docs: Add guide for sensorless homing ( #1004 )
...
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
2019-01-07 10:39:16 -05:00
28e68075c8
docs: Suggest checking for bad wires in "lost communications" faq entry
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 10:28:25 -05:00
186d815469
docs: Documentation/FAQ, Raspii voltage
...
Add note that `under power` may be related to communication issues.
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-05 20:59:12 -05:00
df42887193
docs: Bltouch documentation ( #1073 )
...
Add documentation on howto configure the BL-Touch device with
Klipper. A second paragraph addresses possible issues with BL-Touches
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
2019-01-05 20:24:35 -05:00
59e9b6562f
respond: An extra for sending messages to the printer host. ( #1053 )
...
I have made one change to `gcode.py` to support quoted parameter
values.
I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host ). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.
Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
2019-01-02 17:45:35 -05:00
d7b0a7e961
docs: Add a FAQ item on how to cancel a "wait for temperature" request
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
566488dc01
docs: Add a FAQ item on Raspberry Pi reboots
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
e4dac1039d
docs: Update release notes for v0.7.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 09:15:24 -05:00
e0b2d7c51d
bltouch: Add a BLTOUCH_DEBUG command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-03 22:52:32 -05:00
e505ab0df1
samd21: Add support for flashing an application via the bossac tool
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 22:22:42 -05:00
bb41765714
docs: Minor update to Code_Overview.md with further kinematics info
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-17 14:56:46 -05:00
cd1e669306
docs: Fix typo in command dispatch benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 20:38:30 -05:00
64a1837fec
docs: Round pru command parsing benchmark
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 20:31:41 -05:00
c349863988
docs: Add information on command parsing benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 20:21:05 -05:00
52fa91fb9a
docs: Update benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 18:59:55 -05:00
f973886dac
docs: Minor rewording in Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-14 09:46:21 -05:00
e541466591
servo: This patch create ability to enable/disable attached servo. ( #880 )
...
Cheap mechanical servos have small flickering. When this servo stay on one position, this flickering slowly destroy internal potentiometer and make servo unusable. Many mechanisms need servo only to change position. Therefore I create this minor path to enable/disable servo. It stop pulses for this servo, that's all.
Corresponding G-code is:
SET_SERVO SERVO=config_name [WIDTH=] [ENABLE=<0|1>]
SET_SERVO SERVO=config_name [ANGLE=] [ENABLE=<0|1>]
For example:
SET_SERVO SERVO=touch ANGLE=80 ENABLE=1 ; enable servo and set position
G4 P200 ; wait 200ms
SET_SERVO SERVO=touch ENABLE=0 ; disable servo
This patch add one option to servo configuration:
enable: <False/True> # default True
It not have impact to user code existing already because it is optional parameter and default value is same as original behavior.
Signed-off-by: Jiri Dobry <jdobry@centrum.cz>
2018-11-14 09:38:09 -05:00
31730fa031
docs: Minor wording change to Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:44:33 -05:00
c55842b428
docs: Note when endstop phases are useful in Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:36:00 -05:00
8d4f7db66e
docs: Fix typo in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:41:51 -05:00
097e6c524b
docs: Fix link in FAQ document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:40:35 -05:00
5f9ce32fae
docs: Be more clear that a baud of 250000 is recommended
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:06:27 -05:00
c4058f71fb
docs: Clarify M109/M190 in G-Code documentation
...
Signed-off-by: Lucas Fink <software@lfcode.ca>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 14:22:30 -04:00
057acb07b7
docs: Add a Slicers.md document
...
Add some information on configuring a slicer for use with Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:47:32 -04:00
47e45ab391
docs: Note the use of gcode_macro in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:38:03 -04:00
a33792f07e
util: Fix versioning when gitdir is absent ( #809 )
...
The gitdir previously could be absent and produce a version of "" in
spite of checks for it. Fixed.
Parent directories with shlex-interpreted characters in their names
could be misinterpreted. Removed shlex parsing.
Packagers may want to remove the git history to slim down the package
size, so add an option for using a file 'version' in the klippy
directory to set version without using git.
Signed-Off-By: Lucas Fink <software@lfcode.ca>
2018-10-27 10:44:38 -04:00
a7c8476e98
docs: Update pressure advance doc to note it only impacts the extruder
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
3d7e8fa5ec
docs: Note impact of warping during pressure advance tuning
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 12:10:47 -04:00
ca7dd8bfd4
docs: Update Pressure_Advance.md - don't set square_corner_velocity=0
...
Setting the square corner velocity to zero would cause stuttering
during the test if a bed mesh is in effect. It's possible to get the
desired effect by reducing the square corner velocity and setting the
pressure advance lookahead time instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 11:43:03 -04:00
b6bf455155
tmc2660: Add endstop phase detection functionality to TMC2660 extra ( #816 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-24 16:01:12 -04:00
04a12ec9bd
docs: Update stm32f1.md - usb is now supported.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 13:22:58 -04:00
e4bb90a1ca
bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
925562cfb1
delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
ca04caa42c
docs: Fix SAM4E8E benchmark test revision
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:21:43 -04:00
2b81b2935c
docs: Update SAM4E8E benchmarks
...
New benchmark numbers reported by @FHeilmann.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:18:55 -04:00
b903f84c80
docs: Replace get_status example with get_clock in Protocol.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-20 11:53:32 -04:00
530a37196c
docs: Update LPC176x benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 09:55:02 -04:00
0079311b0b
docs: Add an Endstop_Phase.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
1e71909d02
endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
f5c99c1dec
docs: Update benchmarks for Arduino Due
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 11:57:13 -04:00
aa693fbdc1
docs: Updates to stm32f103 benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:57:24 -04:00
75fa74313c
stm32f1: Add support for building with bootloader support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
bc5e961d73
stm32f1: Initial support for serial over USB
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
1e07be4db4
docs: Add a "Lost communication with MCU" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:22:28 -04:00
852d1666bb
docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md
...
Reported by @fiveNinePlusR
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-04 19:01:18 -04:00
b261d31ec5
bed_mesh: Add ability to save mesh state to persistent memory
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-02 16:26:35 -04:00
5c267e4f69
docs: Update Features.md document with tmc2660 support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-02 14:07:33 -04:00
Kevin O'Connor
Yannic Schröder
Wilfried Goesgens
Alec B. Plumb
Jiri Dobry
lf
Florian Heilmann
Arksine