fe84968bdc
docs: Add uninstall notes to faq
...
From comments in https://github.com/KevinOConnor/klipper/issues/1084
This documents the script added in 0ba1f5109d
2020-08-03 14:16:34 -04:00
e4d0044be8
docs: Add a "hardware pin type" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-16 13:04:00 -04:00
7912c39f9e
docs: Add a "why does klipper report errors" section to FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-05 17:04:02 -04:00
3c01b60a88
docs: Update FAQ with TMC2208 "standalone" mode workaround
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-29 11:08:49 -04:00
5ff45636d9
docs: Minor FAQ updates
...
Fix rendering of Patreon URL in FAQ. Use same "ls" command to find
the serial port that Installation.md uses. Note Raspberry Pi 4 is
supported. Note problems with ModemManager. Point to Bed_Level.md in
Z position_endstop question. Link to Config_checks.md in "Z
screaching" FAQ.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-06 10:45:48 -05:00
8663bc8192
docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 13:51:47 -05:00
205da598fd
docs: Move upgrade instructions to the last item in the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 13:39:49 -05:00
3665e9fc53
docs: Recommend safe_z_home over homing_override
...
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 16:50:52 -05:00
197030c684
docs: Update FAQ to reference Bootloaders.md on "make flash" failure
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-22 10:07:34 -04:00
fd1dff3f02
docs: Fix numbering in FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-08 16:48:14 -04:00
73fd292637
docs: Update "avr restart=command" FAQ to point to bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-07 23:02:20 -04:00
8bc9f39c58
docs: Avoid using .. in markdown links
...
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 21:12:21 -04:00
328bd89fc1
docs: Warn against using the TMC2208 in standalone mode
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-20 16:22:06 -05:00
82efed5e2a
docs: added an answer to the FAQ about detecting lost steps ( #1265 )
...
Signed-off-by: christian mock <cm@tahina.priv.at>
2019-02-17 22:35:58 -05:00
5b9ce328e5
docs: Clarify FAQ item on running multiple instances of klippy
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-03 17:41:57 -05:00
90827a88de
docs: Minor wording change to step_distance FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-27 16:52:16 -05:00
71ef715a88
docs: Expand FAQ on why step_distance is used
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-27 11:29:42 -05:00
76138fde5c
docs: Add a FAQ item for "Do I have to use OctoPrint?"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-21 12:01:24 -05:00
f2f54290e8
docs: Add a new Config_Changes.md document
...
Add a document to track non-backwards compatible changes to the
printer config file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 20:00:44 -05:00
c8e04274ad
docs: Add a FAQ item for "multiple instances of klipper on the same machine"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 13:59:52 -05:00
28e68075c8
docs: Suggest checking for bad wires in "lost communications" faq entry
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 10:28:25 -05:00
186d815469
docs: Documentation/FAQ, Raspii voltage
...
Add note that `under power` may be related to communication issues.
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-05 20:59:12 -05:00
d7b0a7e961
docs: Add a FAQ item on how to cancel a "wait for temperature" request
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
566488dc01
docs: Add a FAQ item on Raspberry Pi reboots
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
097e6c524b
docs: Fix link in FAQ document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:40:35 -05:00
5f9ce32fae
docs: Be more clear that a baud of 250000 is recommended
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:06:27 -05:00
1e07be4db4
docs: Add a "Lost communication with MCU" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:22:28 -04:00
96acfdc6d2
docs: Minor rewording of Marlin pin number section of FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:06:32 -04:00
a27e82aef3
docs: Add a section to the FAQ on translating Marlin pin numbers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-24 21:43:53 -04:00
f2d232ef77
force_move: Provide defaults for SET_KINEMATIC_POSITION parameters
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-02 08:58:18 -04:00
0025fbf10d
toolhead: Replace junction_deviation with square_corner_velocity
...
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure. Replace it with a
"square_corner_velocity" configuration parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:43 -04:00
2c4ca88887
docs: Update documentation to note use of /dev/serial/by-path/
...
When using multiple micro-controllers it may be necessary to use an id
from /dev/serial/by-path/ instead of /dev/serial/by-id/. Also,
emphasize that in config/example-multi-mcu.cfg.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-01 17:22:03 -04:00
42ca985bef
docs: Add reference to homing_override in FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-20 19:33:54 -04:00
cd9e21e3aa
FAQ: Add item on TMC2208 being disabled in the middle of a print
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-05 13:06:55 -04:00
22c49a7c3f
docs: Improve FAQ update software entry (use make menuconfig ; make clean)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-25 10:29:55 -04:00
832c0bc017
docs: Add more hints to use /dev/by-id/ for the serial device
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-20 11:57:49 -04:00
c539fed8bb
docs: Add additional information to FAQ on heater checks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-09 22:00:26 -04:00
039bb9f10f
docs: Add Patreon link to FAQ page
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-31 13:55:41 -04:00
ef820d98f6
docs: Add "will heaters be turned off on a crash" item to FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-13 11:36:45 -04:00
82a65e9f4a
docs: Note the use of the virtual_sdcard feature
...
Note that virtual_sdcard helps on slower machines.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-02 11:28:01 -05:00
054cbbe094
docs: Add a FAQ item on steps to upgrade the software
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-12 18:38:49 -05:00
83e9e92b9a
docs: Add a table of contents to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-05 11:42:00 -05:00
29c83cec22
docs: Update installation document with pointers to FAQ
...
Add some pointers to the FAQ for common pitfalls during installation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-04 13:29:17 -05:00
8944e2104d
docs: Add FAQ item on AVR watchdog restart failures
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-11 18:17:14 -05:00
319221ee23
docs: Provide additional information on "make flash" failures
...
Add some additional information on "make flash" problems.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-11 17:33:29 -05:00
37788c1e55
docs: Add a FAQ document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-11-30 15:19:40 -05:00
Elton Law
Kevin O'Connor
christian mock