c3e889a67c
docs: Add performance results for SAMD51
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-28 20:05:50 -05:00
549e682069
docs: Add sam4s8c benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:43:56 -05:00
52fa91fb9a
docs: Update benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 18:59:55 -05:00
2b81b2935c
docs: Update SAM4E8E benchmarks
...
New benchmark numbers reported by @FHeilmann.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:18:55 -04:00
530a37196c
docs: Update LPC176x benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 09:55:02 -04:00
f5c99c1dec
docs: Update benchmarks for Arduino Due
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 11:57:13 -04:00
aa693fbdc1
docs: Updates to stm32f103 benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:57:24 -04:00
5c267e4f69
docs: Update Features.md document with tmc2660 support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-02 14:07:33 -04:00
4b5db04f78
docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
c8dc47b162
docs: Note digipot support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 21:10:53 -04:00
ac3aa097fb
docs: Features.md updates
...
Add information on new features in Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 20:55:53 -04:00
a8a912fbb5
docs: Update sam4e8e docs and benchmarks ( #562 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-22 19:17:43 -04:00
64e6d85898
sam4e8e: Add the SAM4e8e port
...
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-08 10:44:49 -04:00
a5d27c55e1
docs: Update perf benchmarks with SAMD21 results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:03:42 -04:00
fa9b321991
docs: Update main documentation to not Smoothieboard support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 11:01:54 -04:00
83d3c17280
docs: Add LPC1768 benchmarks to Features.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-25 11:52:13 -04:00
606222da5b
docs: Add STM32F103 benchmarks to the Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-20 11:19:37 -04:00
a0f0911a95
docs: Reword performance paragraph in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-27 13:59:47 -04:00
ead99cf647
docs: Update Features.md document for multiple micro-controllers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-26 22:27:25 -04:00
0adea120cd
pru: Compile the irq_poll() function with -O2 optimization
...
Compile the PRU binary with -Os optimization, but request that the
timer dispatch code be compiled with -O2 optimization. This improves
the performance of timers slightly.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-08-15 11:05:30 -04:00
71bb7acb8e
pru: Compile with -Os instead of -O2
...
The gcc -Os option significantly reduces the size of the PRU binary
and it has little impact on performance.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-08-14 21:08:28 -04:00
f0f4ab7abe
docs: Update benchmarks in Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-08-11 11:40:54 -04:00
a3162b17d9
docs: Use only single space at start of new sentence
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-01 11:58:32 -04:00
e177d4f70d
docs: Reword smoothed look-ahead description in Kinematics
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-01 11:58:32 -04:00
c1c0b2dd38
docs: Avoid using "firmware" in the documentation
...
The term "firmware" is ambiguous - it could refer to the entire
project (host and micro-controller software) or to just the
micro-controller software. Avoid the term in the documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 15:59:33 -04:00
e507848a8f
docs: Remove "experimental" from descriptions
...
The Klipper software has progressed to the point where it does not
need to be described as "experimental" software.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:31:39 -04:00
b74b09ea7a
docs: Updates to Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:52:36 -04:00
8491b1f86a
docs: Update Features document with latest performance benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 13:53:33 -04:00
384c853a39
docs: Update benchmark results in Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-31 17:50:36 -04:00
3238256b79
docs: Update benchmark results in Features document
...
Some additional tweeks to the scheduler has resulted in minor
improvements to the stepper benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-26 23:31:33 -04:00
0f2478b62f
docs: Update benchmark results in Features document
...
Recent scheduler optimizations have made a minor improvement to the
stepper benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-11 12:23:24 -05:00
f46bc0ef04
stepper: Change default max_error from 50us to 25us
...
Change the default compression error window (max_error) from 50us to
25us - it's common for stepper motor drivers to have 30us for their
"pwm fixed off time" and it would be good for the steps to be
scheduled within that time.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-12-28 22:38:27 -05:00
18456f71f8
docs: Add a features document
...
Add a document describing some high-level features in Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-12-20 22:31:46 -05:00
Kevin O'Connor
Florian Heilmann