Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
3,203 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

834 Commits

Author SHA1 Message Date
Janar Sööt 7a615b4f69 hall_filament_width_sensor: fix error 
Fix no attribute error in in get_status

Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2020-08-13 16:49:51 -04:00
Arksine e4f3f60ea6 virtual_sdcard: register sd static path 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-11 10:47:04 -04:00
Bryan Boettcher 04bd48ca9d
adc_temperature: add support for AD597 (#3164) 
The AD597 thermocouple amplifier is used in the Raise3D N2+ (and
possibly others).

Signed-off-by: Bryan Boettcher <bryan.boettcher@gmail.com>
 2020-08-09 21:06:43 -04:00
Janar Sööt d991b4c83b
menu: Replace menu with new Jinja2 template system (#2344) 
menu.cfg:
- jinja2 template scripting
- new Setup menu
- new Calibration menu
menu:
- redesigned menu code
- jinja2 support
- option to reverse menu up and down directions
- functionality set to support menu injection from other modules
- a new way of defining menu hierarchy
- other adjustments

Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2020-08-09 09:29:55 -04:00
Trevor Jones efebbb9a2f
tmc5160: diag0 support (#3159) 
Allow for diag0 only hardware to use sensorless homing.

Signed-off-by:  Trevor Jones <trevorjones141@gmail.com>
 2020-08-09 08:17:51 -04:00
Toby Harper f851cfae46
gcode_arcs: increment absolute e coord for each arc segment (#3162) 
Arc travel was working but extrusion in absolute mode seemed not to be happening at all. This was because the E coord being sent with each G1 segment of the arc was not incrementing, effectively the same value was being sent over and over so the total extrusion for the whole arc was the amount for just one segment which is an extremely tiny amount.

My change increments e_base by e_per_move for each subsequent coord when in absolute extrude mode which results in the correct absolute E value being sent for each segment.

Signed-off-by: Toby Harper <toby@fuith.org>
 2020-08-07 12:15:03 -04:00
bondus c9e7119a93
fan_generic: Add support for named fans and gcode to control them (#3054) 
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
 2020-08-07 11:39:44 -04:00
Arksine b9f48e634e print_stats: Add virtual_sdcard state tracking 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Arksine 6b1ad715aa print_stats: stat tracking for virtual sdcard prints in progress 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Arksine 463194b1a3 virtual_sdcard: update get_status method 
Do not reset progress to zero while paused.  Report 'is_active' and 'file_position'.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Arksine 963d7c247b virtual_sdcard: add SDCARD_PRINT_FILE gcode 
SDCARD_PRINT_FILE allows Klipper to load and start the print for any
gcode file within the virtual_sdcard path, including subdirectories.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Arksine af39a209f3 virtual_sdcard: add SDCARD_RESET_FILE gcode 
This allows the user to close a currently loaded file and reset the virtual_sdcard's state.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Florian Heilmann 10987003b0
safe_z_home: Make sure X and Y are homed before homing Z (#3153) 
In it's current behavior, safe_z_home will attempt to home Z if it thinks the toolhead is above the z endstop even if the motors have since been disabled and the toolhead was moved to another position

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2020-08-05 11:52:23 -04:00
Arksine 3143e31aca temperature_sensor: report min/max measured temp via get_status 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-01 15:56:51 -04:00
Arksine d37374974d filament_switch_sensor: report "enabled" state via get_status 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-01 15:56:51 -04:00
Kevin O'Connor 1f7c3fc8ec gcode: Report the final print_time in debuginput mode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-30 12:53:59 -04:00
Arksine 4795c0896d bed_mesh: Move profile management to its own class 
This streamlines the BedMeshCalibrate class, making it only resposible for configuring and executing the calibration procedure.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-07-25 12:05:29 -04:00
Arksine dbec03abd9 bed_mesh: track the probed_matrix and mesh_params exclusively in the ZMesh class 
Rather than have multiple classes keep a reference to these items, keep them in the z_mesh.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-07-25 12:05:29 -04:00
Arksine 41eedda5d6 bed_mesh: differentiate between "mesh_config" and "mesh_params" 
This fixes an issue where a new profile is not properly saved after a restart.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-07-25 12:05:29 -04:00
Arksine 7c8b60b40e bed_mesh: round x and y positions received via the finalize callback 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>

Update bed_mesh.py
 2020-07-25 12:05:29 -04:00
Arksine 6458def588 bed_mesh: add get_status() method 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-07-25 12:05:29 -04:00
Kevin O'Connor db05938a5f servo: Set initial value via mcu_servo.setup_start_value() 
Using the setup_start_value() method avoids the PWM output line
transitioning to an intermediate state prior to setting the initial
value.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:39:39 -04:00
Kevin O'Connor 428a8d4881 servo: Remove servo ENABLE parameter 
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:39:39 -04:00
combolek 3835654116
lm75: Added support for LM75/LM75A I2C connected temperature sensors (#3101) 
Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>
 2020-07-19 20:18:54 -04:00
Iakabos b0901daa85
display: Add configuration options for OLED displays (#3084) 
Add user-configurable contrast, vcomh (affects "smearing"), and invert options for SSD1306/SH1106 type OLED displays.

Signed-off-by:  James Esau <james_esau@hotmail.com>
 2020-07-19 20:18:08 -04:00
Kevin O'Connor af981432f0 thermistor: Add in definition for "SliceEngineering 450" thermistor 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-11 12:50:58 -04:00
Kevin O'Connor 3a57608642 fan: Separate out the part cooling fan code from the generic fan code 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-05 21:04:04 -04:00
Dmitry Butyugin 4bdc11a8b3
input_shaper: Initial support of input shaping (#3032) 
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-07-05 20:54:38 -04:00
Kevin O'Connor c6b652044d stepper: Make sure to reload trapq in set_stepper_kinematics() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-30 20:20:16 -04:00
Arksine a342770ac5 pause_resume: Add CANCEL_PRINT gcode 
Register API endpoints for "pause_resume/pause", "pause_resume/resume" and "pause_resume/cancel".

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-06-24 19:07:33 -04:00
Arksine a31dd0ff0e query_endstops: register "query_endstops/status" endpoint 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-06-24 19:07:33 -04:00
Denis Ignatenko b3298d8992
hall_filament_width_sensor: Added width logging (#2981) 
Signed-off-by: Denis Ignatenko deniss979@gmail.com
 2020-06-16 13:36:49 -04:00
Arksine 4c571ea9ac bme280: fix reported measured time 
This allows the bme280 to correctly work with the temperature_fan module.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-06-16 09:53:10 -04:00
Kevin O'Connor 65ae08ef21 menu_keys: Add a register_button() helper method 
Use a helper method to register each button handler.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:23:34 -04:00
Kevin O'Connor 8d9566b945 menu_keys: Reschedule long-click timer on each click 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:23:34 -04:00
Kevin O'Connor 7d8ade74e8 menu_keys: Move button handling from menu.py to new file menu_keys.py 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:23:34 -04:00
Kevin O'Connor 0e9aa76066 uc1701: Update bus import to "from .. import bus" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:15:53 -04:00
Kevin O'Connor f931da1b87 extras: Use "from . import module" for relative imports 
Use alternate import syntax to improve Python3 compatibility.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:15:53 -04:00
Kevin O'Connor 6edc2946db sx1509: Improve Python3 compatibility 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:15:53 -04:00
Kevin O'Connor 4b231470ed delta_calibrate: Improve Python3 compatibility 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:15:53 -04:00
Kevin O'Connor 8c96e9dd11 bed_mesh: Improve Python3 compatibility 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:15:53 -04:00
Kevin O'Connor f5cdfad333 mcu: Avoid using "async" for variables as it conflicts with Python3 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 17:15:53 -04:00
Kevin O'Connor c4de0bba50 pid_calibrate: Avoid internal error on a shutdown 
If a shutdown occurs during a PID_CALIBRATE command (eg, due to a
heater problem) then exit cleanly instead of throwing an internal
error.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-14 11:34:04 -04:00
Kevin O'Connor 519c3ad5ee uc1701: Optimize swizzle_bits() code 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-12 09:37:37 -04:00
Kevin O'Connor 9465618adb display: Rework write_graphics() to take one character cell at a time 
Change write_graphics() from taking one pixel row of n characters to
taking all the rows and columns for one character cell.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-11 00:18:23 -04:00
Kevin O'Connor 467e8e6f40 display: Default DISPLAY=display in SET_DISPLAY_GROUP command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 12:19:53 -04:00
Florian Heilmann 68fcbe2a62
display: add SET_DISPLAY_GROUP command (#2969) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2020-06-09 12:07:25 -04:00
Florian Heilmann f28c3319ed
uc1701: Fix for glyph rendering on uc1701 display (#2966) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2020-06-09 08:20:48 -04:00
Kevin O'Connor cf9627cc05 display: Use animated heated bed icons on default hd44780 display 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 08:09:59 -04:00
Kevin O'Connor 7713986ae1 display: Make hd44780 glyphs configurable 
Allow the 20x4 hd44780 screen glyphs to be customizable from the
config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 08:09:59 -04:00