17123889f6
heaters: Make heater.py an "extras" module
...
The heater logic is an independent module that does not need to be
treated as part of the "core" klipper code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-25 14:26:45 -04:00
c197fdb03d
heater: Fix misspelling of Celsius
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-27 11:31:51 -05:00
dd12c981ef
temperature_fan: add get_status() function
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-10-22 22:10:13 -04:00
43103929e3
temperature_fan: Allow min_speed to be set to zero
...
Reported by @meteyou.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-14 15:35:09 -04:00
82b58e46a7
temperature_fan: Remove executable flag from temperature_fan.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-10 14:30:48 -04:00
60bc93f36b
temperature_fan: Add gcode command for temperature_fan.py ( #1520 )
...
Adding gcode command for setting the target temperature of temperature_fan.
Example gcode: SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target=35.0
Signed-off-by: Martin Nowroth <madnoth@gmail.com>
2019-04-15 21:13:29 -04:00
c105adc80b
temperature_fan: Fix. Temperature fan min speed should be used ( #1405 )
...
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-03-28 14:07:40 -04:00
0b095ddf47
temperature_fan: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
f9968904d6
temperature_fan: Remove stats as it now supports gcode reports
...
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-02-26 12:07:00 -05:00
3887ad4fce
heater: Support generic gcode_id registration for sensors
...
Support reading a "gcode_id" parameter from heater/sensor config
sections.
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-26 12:07:00 -05:00
9519e05394
temperature_fan: Fix issue 403 use max_speed
...
Signed-off-by Douglas Hammond <wizhippo@gmail.com>
2018-06-19 11:51:07 -04:00
d7b29eca47
temperature_fan: Don't write "temperature_fan " to prefix stats
...
Just write the user provided name in the stats.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-23 18:22:02 -04:00
3e1febce78
temperature_fan: Don't always enable stats generation
...
Don't return True from the stats() method - that keeps stats logging
on permanently.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-23 00:27:32 -04:00
2740838b2e
fan: Allow the fan shutdown_speed to be configured
...
Add a shutdown_speed config option to fans so that users can specify
the speed on a shutdown event.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-18 19:12:03 -04:00
5712283e91
Add temperature controlled fans
...
Signed-off-by Douglas Hammond <wizhippo@gmail.com>
2018-05-17 12:50:21 -04:00
bf3c41cd06
temperature_fan: Add support for temperature-triggered fan.
...
Signed-off-by: Michael Barbour <barbour.michael.0@gmail.com>
2018-05-10 19:32:23 -04:00
Kevin O'Connor
Arksine
Martin Nowroth
Douglas Hammond
Michael Barbour