Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
1,489 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

1489 Commits

Author SHA1 Message Date
Janar Sööt d22b30342a gcode_macro: 2 lines wrapped at 80 chars 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-09-26 08:03:39 -04:00
Janar Sööt 51d64ad7f8 gcode_macro: macro improvement with parameters 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-09-26 08:03:39 -04:00
Kevin O'Connor 170b9678fb display: Don't error on an out of range M73 request 
No need to report an error if the M73 is not between 0 and 100 - just
display the nearest valid value.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 20:51:51 -04:00
Kevin O'Connor 364faf497b toolhead: Update look-ahead flush comment 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 15:44:45 -04:00
Janar Sööt 18b56c3cda menu: vsdcard - scroll long filenames (#694) 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-09-25 14:52:23 -04:00
Kevin O'Connor 95392595f6 config: Wanhao Duplicator 6 likely does not need "restart: command" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 14:29:05 -04:00
Kevin O'Connor 4b5db04f78 docs: Add Delta_Calibrate.md guide with "enhanced delta calibration" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Charlie 1165c0c9c5 docs: Additional images for enhanced calibration procedure reference (#639) 
Signed-off-by: Charles Galant <cgalant@cogwheel.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 0b2c89ecaf delta_calibrate: Initial support for enhanced delta calibration 
Add support for an enhanced delta calibration routine that performs XY
dimension calibration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 929733f0a7 delta_calibrate: Support save/restore of delta_calibrate state 
Support using SAVE_CONFIG to store the results of DELTA_CALIBRATE to
the printer config file.  Store the low level probe measurements in
the config as well.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor ed0882dc10 delta: Move "stable position" logic to delta_calibrate.py 
Move the "stable position" logic from the delta.py kinematics code to
the delta_calibrate.py calibration code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor d48e8ea162 bed_tilt: Support saving calibration data via SAVE_CONFIG command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 5a1b2d61ae pid_calibrate: Support saving calibration data via SAVE_CONFIG 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 531134f092 configfile: Add support for rewriting the printer config file 
Add support for writing back the main printer config file with
additional calibration data stored in it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor f80456a698 configfile: Move config file code from klippy.py to new file 
Add a klippy/configfile.py file with the code needed to read the main
printer config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Janar Sööt 5144c5f01e menu: new fast step rate feature 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-09-21 19:29:30 -04:00
Kevin O'Connor 1379a59085 st7920: No need to clear glyph framebuffer before programming glyphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 7cca8d970a hd44780: Simplify framebuffer access 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 742d6481a9 st7920: Simplify framebuffer access 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 05ba62600c st7920: Support writing degrees symbol 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor a4e2540f14 uc1701: Support writing degrees symbol 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 30a49d3186 display: Use write_glyph() when writing special characters 
Always use the write_glyph() method when writing special characters
during status screen updates.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor c8d9d575a1 display: Support writing single character glyphs using write_glyph() 
Add write_glyph() support to hd44780.py.  Update uc1701.py and
st7920.py to support writing single character glyphs via
write_glyph().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 2a5778be3a display: Move icon drawing from display.py to lcd_chip code 
Move the st7920 icon rendering optimizations from display.py to
st7920.py.  This simplifies the code for other displays.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 2857255ef1 icons: Add the bed to the bed heating animations 
It isn't necessary to use the st7920's xor capabilities when drawing
the bed heating animations.  This makes it easier to use the icons for
other displays.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-21 16:39:38 -04:00
Kevin O'Connor 3d4ee9e962 docs: Add stm32f1.md link to Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-20 20:11:04 -04:00
Kevin O'Connor 174754299a heater: Add new TURN_OFF_HEATERS command 
Add a command that will turn off all heaters in the printer.  Run this
command in the default idle_timeout action.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-18 16:01:07 -04:00
Janar Sööt 7b6a44e8f9 menu: New Tune submenu (#653) 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-09-17 08:26:59 -04:00
Janar Sööt f7f78433a2 gcode: modify get_status method to output more info (#651) 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-09-17 08:25:28 -04:00
Kevin O'Connor 48ddfba415 test: Add printer-wanhao-duplicator-6-2016.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-16 22:45:31 -04:00
Clifford Raccani 67c6234907 config: Add printer-wanhao-duplicator-6-2016.cfg 
Signed-off-by: Cliff Raccani <bramhall45@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-16 19:52:41 -04:00
Maks Zolin a9f2a1375a quad_gantry_level: Fix typo, add floating point error protection 
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
 2018-09-14 10:45:28 -04:00
Kevin O'Connor 390d549c0c delta: Fix maximum halt velocity calculation 
If an arm is nearly parallel to the bed then that tower's carriage may
have a velocity up to 3 times greater than the toolhead's maximum
velocity (relative to the print).  Take that into account when
calculating the stepper's maximum halt velocity.

This fixes some rare "No next step" shutdowns on delta printers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 22:29:18 -04:00
Kevin O'Connor 094b9de69e gcode: Send proactive state messages 
Send a g-code info message on printer state changes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 21:31:27 -04:00
Kevin O'Connor 91691afdcf gcode: Catch errors on fd read and write 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 21:06:54 -04:00
Kevin O'Connor d1da6100a6 klippy: Remove unneeded loop in run() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 21:06:54 -04:00
Kevin O'Connor 32b763efb1 config: Fix generic-re-arm.cfg encoder pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 14:43:10 -04:00
Kevin O'Connor d459ae648d config: Update generic-re-arm.cfg with menu buttons 
Reported by @J-charles-C.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 09:07:50 -04:00
Maks Zolin e3a49dc692 quad_gantry_level: Add gantry leveling (ruled hyperbolic parabola correction) (#631) 
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
 2018-09-12 08:33:20 -04:00
Boffgithub 0c0087ce42 config: Update example-extras.cfg (#641) 
Just correcting a couple of spelling errors I noticed.

Signed-off-by: Ben Warren <boffdroid@gmail.com>
 2018-09-12 08:13:12 -04:00
Kevin O'Connor 5791a4d8c4 toolhead: Set commanded_pos[] to move.end_pos 
Commit 4573932f allowed move.end_pos to differ from the requested end
position - the toolhead class should use the updated position when
storing its commanded position.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-11 13:45:33 -04:00
Kevin O'Connor 4573932f89 toolhead: Handle rounding errors with extrude only moves 
It's possible that a g-code transform class may make an extrude only
move appear as a kinematic move due to limitations of double precision
math.  Handle this by checking for an inconsequential move distance
instead of checking for a move distance of exactly zero.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-11 13:40:52 -04:00
Florian Heilmann 947a7b2b0f tmc2660: Implementation of TMC2660 extra (#621) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-09-11 12:34:05 -04:00
Kevin O'Connor f15cd62587 docs: Update Pressure_Advance.md document 
Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-11 12:00:43 -04:00
Kevin O'Connor ea7de3bcad config: Use fastest PWM time in mini-rambo PWM DAC config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-11 09:40:48 -04:00
Kevin O'Connor b595c3e423 config: Add example lcd section to smoothieboard config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-10 15:29:54 -04:00
Arksine d6f72eefa1 bed_mesh: Cache last position when get_position() is called. 
Fixes issue #626.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-09-10 15:10:43 -04:00
Kevin O'Connor ea129d869e config: Fix position_endstop typo in sample-bltouch.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-09 10:30:06 -04:00
alemorbel aac2fee9de config: Add display buttons pins for anycubic kossel pulley 2016 (#614) 
Signed-off-by: Alejandro <alemorbel@alemorbel.es>
 2018-09-06 18:31:55 -04:00
Kevin O'Connor c8dc47b162 docs: Note digipot support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-03 21:10:53 -04:00