Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
1,816 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

302 Commits

Author SHA1 Message Date
Rui Caridade 276d5a1436 probe: Add PROBE_ACCURACY command 
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.

Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-18 00:36:28 -05:00
christian mock 82efed5e2a docs: added an answer to the FAQ about detecting lost steps (#1265) 
Signed-off-by: christian mock <cm@tahina.priv.at>
 2019-02-17 22:35:58 -05:00
Kevin O'Connor cc4ecef88b mcp4018: Add initial support for the mcp4018 digipot 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-16 08:16:37 -05:00
nopbit 0f674ef407 tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132) 
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.

Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
 2019-02-14 10:13:48 -05:00
KevinOConnor c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater 
Generic Heater Support
 2019-02-14 10:08:26 -05:00
Kevin O'Connor dd303ec4a9 docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-13 23:20:34 -05:00
John Jardine 6316b2c1b6 Generic Heater Support 
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
 2019-02-14 01:15:11 +00:00
Kevin O'Connor 5aa4fd2b4a docs: Note MCP4728 in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 18:39:12 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:38:13 -05:00
Kevin O'Connor 57e6acbc5c docs: Add Bed_Level.md and Probe_Calibrate.md documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor b0b9fc6f4a probe: Use manual_probe helper when performing manual probes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 35ea4a137d probe: Add PROBE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor d14a53e160 manual_probe: Add a helper script for performing manual Z probing 
Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 805e56008f docs: Note command dispatch benchmark needs desktop class machine 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-11 16:35:03 -05:00
Kevin O'Connor 5ab6bcd1d7 docs: Report the actual SAMD51 3 stepper rate in the Features benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-11 12:57:44 -05:00
Florian Heilmann 607461f7b6 docs: Update duet2 benchmarks 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-02-10 17:59:40 -05:00
Kevin O'Connor faedc77621 docs: Fix typo in Protocol.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-10 11:53:56 -05:00
Kevin O'Connor 32e0d4d3ac docs: Update atsam benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-07 13:24:03 -05:00
Kevin O'Connor 1f9208dc66 docs: Update benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-06 22:08:39 -05:00
Kevin O'Connor 5b9ce328e5 docs: Clarify FAQ item on running multiple instances of klippy 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-03 17:41:57 -05:00
Kevin O'Connor c3e889a67c docs: Add performance results for SAMD51 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-28 20:05:50 -05:00
Arksine 893cbbab83 pause_resume: update documentation 
Add updates to example-extras.cfg and G-Codes.md documenting pause_resume.  Also add M600 (filament change) to sample-macros.cfg.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-01-28 11:23:52 -05:00
Kevin O'Connor 90827a88de docs: Minor wording change to step_distance FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-27 16:52:16 -05:00
Kevin O'Connor 71ef715a88 docs: Expand FAQ on why step_distance is used 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-27 11:29:42 -05:00
Kevin O'Connor b6ccd2682c Kconfig: Move SERIAL_BAUD to src/Kconfig and show with LOW_LEVEL_OPTIONS 
Move the definition of SERIAL_BAUD to the main src/Kconfig file.  Only
show this as an option if the user selects the ability to configure
low-level options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-25 18:02:03 -05:00
fredizzimo 15afcf69fe docs: Improve the BLTouch documentation (#1107) 
Signed-off-by Fred Sundvik <fsundvik@gmail.com>
 2019-01-25 12:53:00 -05:00
Kevin O'Connor 76138fde5c docs: Add a FAQ item for "Do I have to use OctoPrint?" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-21 12:01:24 -05:00
Kevin O'Connor 8c5a94f49f docs: Sort command dispatch table by transfer rate 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-20 14:17:08 -05:00
Kevin O'Connor f0ac5c378f docs: Update Debugging document with SAM3X8E usb transfer benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-20 00:57:48 -05:00
Kevin O'Connor 33f5b5f285 docs: Update Code_Overview.md with removal of printer_state() callback 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-08 11:34:09 -05:00
Kevin O'Connor e26d1a3567 i2ccmds: Pass the i2c address as a 7-bit number (0-127) 
The sam3 i2c code and the linux code use a 7-bit i2c address, while
the avr, lpc176x, and samd21 i2c code uses an 8-bit address with the
least significant bit always zero.  A similar issue occurred in the
host code (sx1509.py and replicape.py use 7-bit addresses while
uc1701.py and mcp4451.py use 8-bit addresses).

Consistently use 7-bit addresses in all the code.  This breaks
compatibility between host and mcu software, so make a change to the
config_i2c command to force users to synchronize software updates.
This also breaks common Smoothieboard configs, so update the mcp4451
code to validate the i2c_address.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 20:00:44 -05:00
Kevin O'Connor f2f54290e8 docs: Add a new Config_Changes.md document 
Add a document to track non-backwards compatible changes to the
printer config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 20:00:44 -05:00
Kevin O'Connor 549e682069 docs: Add sam4s8c benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 19:43:56 -05:00
Kevin O'Connor 70bbdf9334 sam3: Rename src/sam3x8e to src/sam3 
This is in preparation for merging sam3 and sam4 code into one
directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 19:33:26 -05:00
Kevin O'Connor c8e04274ad docs: Add a FAQ item for "multiple instances of klipper on the same machine" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 13:59:52 -05:00
Yannic Schröder d015209388 docs: Add guide for sensorless homing (#1004) 
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
 2019-01-07 10:39:16 -05:00
Kevin O'Connor 28e68075c8 docs: Suggest checking for bad wires in "lost communications" faq entry 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 10:28:25 -05:00
Kevin O'Connor 186d815469 docs: Documentation/FAQ, Raspii voltage 
Add note that `under power` may be related to communication issues.

Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-05 20:59:12 -05:00
Wilfried Goesgens df42887193 docs: Bltouch documentation (#1073) 
Add documentation on howto configure the BL-Touch device with
Klipper. A second paragraph addresses possible issues with BL-Touches

Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
 2019-01-05 20:24:35 -05:00
Alec B. Plumb 59e9b6562f respond: An extra for sending messages to the printer host. (#1053) 
I have made one change to `gcode.py` to support quoted parameter
values.

I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.

Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
 2019-01-02 17:45:35 -05:00
Kevin O'Connor d7b0a7e961 docs: Add a FAQ item on how to cancel a "wait for temperature" request 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 16:25:58 -05:00
Kevin O'Connor 566488dc01 docs: Add a FAQ item on Raspberry Pi reboots 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 16:25:58 -05:00
Kevin O'Connor e4dac1039d docs: Update release notes for v0.7.0 release 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 09:15:24 -05:00
Kevin O'Connor e0b2d7c51d bltouch: Add a BLTOUCH_DEBUG command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-03 22:52:32 -05:00
Kevin O'Connor e505ab0df1 samd21: Add support for flashing an application via the bossac tool 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 22:22:42 -05:00
Kevin O'Connor bb41765714 docs: Minor update to Code_Overview.md with further kinematics info 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-17 14:56:46 -05:00
Kevin O'Connor cd1e669306 docs: Fix typo in command dispatch benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 20:38:30 -05:00
Kevin O'Connor 64a1837fec docs: Round pru command parsing benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 20:31:41 -05:00
Kevin O'Connor c349863988 docs: Add information on command parsing benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 20:21:05 -05:00
Kevin O'Connor 52fa91fb9a docs: Update benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 18:59:55 -05:00