Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
3,307 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

563 Commits

Author SHA1 Message Date
Kevin O'Connor f82a85aad0 docs: Fix typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:17:13 -05:00
Kevin O'Connor e17f2bac96 docs: Minor "coordinate system" wording change to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:05:31 -05:00
Kevin O'Connor e557f2d0c0 docs: Add information on coordinate systems to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 11:09:22 -05:00
Kevin O'Connor 8e87ab0939 gcode: Remove support for "G4 S1" style commands 
The S parameter is not a standard and was not commonly used.  The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-02 19:31:20 -05:00
Kevin O'Connor 43bb45a1d3 docs: Minor update to Config_Changes.md 
Use same "ls /dev/serial/by-id/*" command used in Installation.md.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-01 14:25:40 -05:00
Kevin O'Connor 935088ddff docs: Clarify recent usb device name change in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-01 10:29:15 -05:00
Kevin O'Connor e80ced5568 usb_cdc: Report MCU type on all boards 
Always report the "product id" as the MCU type (instead of as "Klipper
firmware").

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-26 08:45:20 -05:00
Kevin O'Connor 401f7a879c atsam: Enable chipid as usb serial number 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-26 08:42:14 -05:00
Kevin O'Connor d7ec5505a6 atsamd: Enable chipid as usb serial number 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 19:30:31 -05:00
Kevin O'Connor 8f6efe5a7b stm32: Enable chipid as usb serial number 
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 19:30:31 -05:00
Kevin O'Connor 0b0e5a911e docs: Minor wording change in Pressure_Advance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 11:48:41 -05:00
Kevin O'Connor 3aad25eab9 docs: Recommend normal slicer settings in Pressure_Advance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 11:35:39 -05:00
Kevin O'Connor 3683273936 toolhead: Report which axes are homed via get_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 282af0220e toolhead: Report the current extruder from the get_status() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 982567a69a config: Rename avrsim.cfg to generic-simulavr.cfg 
Rename the file to be more similar to the naming of other files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor c188aa982f docs: Kinematics.md updates for extruder instantaneous corner velocity 
As of commit 5f5896ad Klipper will perform look-ahead between moves
even if they have significant differences in extruder flow rates.
Update Kinematics.md accordingly.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-22 17:04:14 -05:00
Kevin O'Connor 6d0c55b6c1 extruder: Initial support for "smoothed pressure advance" 
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 13:18:19 -05:00
Kevin O'Connor 430b8d0e52 usb_cdc: Report the MCU name instead of "Klipper firmware" 
Change the "product id" from the redundant "Klipper firmware" to the
CONFIG_MCU value.  For now, only make this change on boards that have
CONFIG_HAVE_CHIPID set.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 11:56:31 -05:00
Kevin O'Connor 9055e9f9b5 docs: Update SAMD51 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-18 12:49:05 -05:00
Kevin O'Connor 224574da4a stepper: Add get/set_tag_position() and convert calc_position() 
Rename calc_position() to calc_tag_position() and have it calculate
the value of the position from the last stepper set_tag_position()
call.  This enables the calc_tag_position() code to be more flexible
as it can be run with arbitrary positions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-13 19:00:17 -05:00
Kevin O'Connor 0bf4ab66da docs: Add get_status() to list of kinematics methods in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 22:47:10 -05:00
Kevin O'Connor 6116a5d48f stepper_enable: Remove ability to use a list of pins in enable_pin 
Now that the tmc drivers perform automatic soft stepper enabling,
there is no need to be able to list multiple pins in the enable_pin
config setting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 18:45:31 -05:00
Kevin O'Connor 77dff35fae tmc: Remove virtual_enable support and replace with automatic support 
Automatically detect if the stepper has a dedicated enable line.  If
it does not, then automatically enable virtual enable support.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 18:45:31 -05:00
Kevin O'Connor bfb34e0701 stepper_enable: Move motor_off() logic to stepper_enable.py 
Directly disable all the stepper motors on a global motor_off() from
the StepperEnable() class in stepper_enable.py.  This simplifies the
toolhead and kinematic classes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 17:32:18 -05:00
Kevin O'Connor 0bfb655f66 query_adc: Add a new module to help query and debug analog pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 19:28:27 -05:00
Kevin O'Connor 3665e9fc53 docs: Recommend safe_z_home over homing_override 
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 16:50:52 -05:00
Kevin O'Connor ed610a6600 extruder: Consistently use "extruder" for the primary extruder 
No longer allow the primary extruder to be named "extruder0".  This
avoids internal and external confusion between the printer objects and
config section names.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 16:28:47 -05:00
Kevin O'Connor 29b5961d9f docs: Note gcode_arcs and firmware_retraction commands in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 15:44:25 -05:00
Kevin O'Connor 72735b4552 docs: Update Code_Overview.md with new trapq system 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 10:42:12 -05:00
Kevin O'Connor 3f338c08c1 docs: Minor micro-controller updates to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 10:08:21 -05:00
Kevin O'Connor e2f5e2871c docs: Recommend OctoPrint v1.3.12 in Installation.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 11:02:03 -04:00
Kevin O'Connor d65f2e2861 docs: Minor cleanup to square_tower.scad 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-27 12:16:17 -04:00
Kevin O'Connor 632ff9e55a docs: Update benchmarks for stm32f0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:45:07 -04:00
Kevin O'Connor f160a3a824 docs: Reword Pressure_Advance.md paragraph on kinematic impact 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:50:51 -04:00
Kevin O'Connor ccbdb6c531 docs: Pressure_Advance.md should recommend setting ADVANCE_LOOKAHEAD_TIME 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:34:59 -04:00
Kevin O'Connor c794e11c67 docs: Update Pressure_Advance.md to use tuning tower 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:28:03 -04:00
Kevin O'Connor b8a6160646 docs: Update example openocd config in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:05:04 -04:00
Kevin O'Connor f07292084b docs: Remove outdated stm32f1.md document 
The stm32f103 has become popular in the "skr mini" series of boards.
As a result, the stm32f1.md document is no longer relevant.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 18:53:11 -04:00
Kevin O'Connor abdfd92e99 docs: Update release notes for v0.8.0 release 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-21 22:30:04 -04:00
Kevin O'Connor dd9259aaf3 docs: Minor wording changes to Manual_level.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-16 16:48:50 -04:00
Kevin O'Connor 4811b58b39 docs: Update Manual_Level.md with recent config changes 
The sample count and associated settings are no longer in the
screws_tilt_adjust config section - they are now in the probe config
section.  Remove them from the guide.

Reported by @theopensourcerer.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-16 16:35:32 -04:00
Kevin O'Connor dd77b46de9 docs: Note AD849x support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-15 13:08:43 -04:00
Kevin O'Connor 4ef0db5087 docs: Update Config_Change.md with safe_z_homing change 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-03 18:09:01 -04:00
Nils Schulte 27717440aa docs: Update Sensorless_Homing.md with new TMCs (#1958) 
Signed-off-by: Nils Schulte <git@nilsschulte.de>
 2019-10-03 17:56:40 -04:00
Kevin O'Connor 698159921f tuning_tower: Tool for tuning parameters based on print Z height 
This adds a testing tool that can run a command on each Z layer of a
print.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-01 14:46:24 -04:00
Kevin O'Connor 1b8a007969 docs: Add a square_tower.scad and stl print object 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-01 14:46:24 -04:00
Julien Lirochon 0c247e55e6 probe: Add range to probe accuracy results (#2015) 
Signed-off-by: Julien Lirochon <julien@lirochon.net>
 2019-09-29 16:56:46 -04:00
Master92 3a37d4a208 safe_z_home: Hop only if necessary and add option to move xy back 
Once a hop is performed, it will only be re-issued if the z-axis has been
moved in the meantime. Usually it is only moved by a z-homing so doing so
will cause safe_z_home to do the hop on the next homing action.

When z-axis is homed, x and y positions are known. When setting this
boolean option, these are set back to their last positions.

Whenever a hop is specified it is re-issued after the Z axis has been
homed. This is especially necessary when a pressure-based probe is used.
Also, the module decides if a hop is necessary, based on either a known
Z position or a flag that is set whenever the motors are disabled.

Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
 2019-09-18 09:37:33 -04:00
Kevin O'Connor a78329d0b2 docs: Add additional "no delay" benchmarks to Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 10:37:25 -04:00
Kevin O'Connor 3a2d71038f docs: Update stm32f103 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 09:27:37 -04:00
Kevin O'Connor 7580fa2354 docs: Update sam4s8c benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 09:13:51 -04:00
Kevin O'Connor 8211415231 docs: Update sam4s8c step benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 01:12:11 -04:00
Kevin O'Connor d90116ef39 docs: Use tables for tick rates in Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 00:48:01 -04:00
Kevin O'Connor a344f6d2ad docs: Update AVR benchmarks to use gcc v5.4.0 
Current versions of OctoPi ship with avr-gcc v5.4.0, so update the
benchmarks to use that version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-06 13:24:20 -04:00
Kevin O'Connor f8b25a0104 docs: Update USB transfer benchmarks 
It appears that the faster micro-controllers may have their transfer
speeds limited by the host USB controller.  Rerun the usb transfer
benchmarks using a high-speed hub.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-06 13:07:08 -04:00
Kevin O'Connor 01d2183f59 docs: Add STM32F407 benchmarks to Features.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-05 22:42:48 -04:00
Kevin O'Connor f00c50a893 docs: Add stm32f407 benchmarks to Benchmarks.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 20:51:26 -04:00
Kevin O'Connor 7598660542 docs: Sort transfer rate benchmark by rate 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-17 13:55:21 -04:00
Kevin O'Connor d3bd4f9622 docs: Update benchmarks with stm32f446 usb test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-15 22:27:58 -04:00
Kevin O'Connor 43ab8e7113 docs: Fix typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-09 00:13:34 -04:00
Kevin O'Connor 4c09d8bf02 dotstar: Initial support for "dotstar" LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-06 19:44:32 -04:00
Kevin O'Connor 30bd7c0e47 docs: Update stm32f1.md document 
Several restrictions documented in the stm32f1.md no longer apply.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:40:05 -04:00
Kevin O'Connor 485164b8b3 docs: Update MCU_Commands with schedule_soft_pwm_out changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-01 00:23:09 -04:00
Kevin O'Connor 7d4c475e52 docs: Update Features.md to note Duet2 Maestro support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 11:21:38 -04:00
Kevin O'Connor a878831d5e mcp4728: Update to better match printrbot revf requirements 
Reported by @Grumps49.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-26 11:02:56 -04:00
Kevin O'Connor 658088b753 docs: Add initial STM32F446 benchmark results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-25 18:18:42 -04:00
Kevin O'Connor 46041f5411 neopixel: Add support for daisy-chained chips 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-23 21:59:38 -04:00
Kevin O'Connor 197030c684 docs: Update FAQ to reference Bootloaders.md on "make flash" failure 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-22 10:07:34 -04:00
Kevin O'Connor b7bc96c3b2 neopixel: Add initial support for "neopixel" leds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 21:44:01 -04:00
Kevin O'Connor 28aa2f507a endstop: Rename mcu end_stop commands to endstop 
Rename the commands.

The main reason for this change is to force a micro-controller code
updated (due to important bugfix in 7fefe52d).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 08:10:53 -04:00
Kevin O'Connor 0343d0c73a firmware_retract: Remove z_hop support 
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.

The z_hop support is therefore being removed until these issues can be
fixed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 19:25:56 -04:00
Kevin O'Connor 364c22fe84 probe: Rework the PROBE_ACCURACY command parameters 
Don't default to a Z location of 10, as that could cause damage if the
probe's z_offset is greater than 10.  Instead, use the "retract
distance" method that is used for normal multi-sample probing.

Update the PROBE_ACCURACY command parameter names to use the same
parameter names as the PROBE command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 15:21:09 -04:00
Arksine d4d8bf795b filament_switch_sensor: add SET_FILAMENT_SENSOR gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-10 09:57:46 -04:00
Kevin O'Connor ea6f30bd99 docs: Update Protocol.md to use enumerations for pins 
Now that pins use enumerations, update the set_digital_out command
examples.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-09 14:17:28 -04:00
Kevin O'Connor e7dd313a96 docs: Add information on using OpenOCD to Bootloaders.md 
Add information on using OpenOCD.  Add information on flashing the
SAMD21 and SAMD51 with OpenOCD.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-09 13:37:17 -04:00
Arksine e19a41d0dd docs: Add documentation for [delayed_gcode] 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-01 11:09:30 -04:00
Arksine 57eb0e8975 docs: Update for latest changs to skew_correction 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-29 10:58:46 -04:00
Arksine 3a3dfd51b9 docs: Add CLEAR_PAUSE to G-Codes.md 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-28 12:44:49 -04:00
Kevin O'Connor d9d94c858a docs: Add skew_correction.md to Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-27 09:50:17 -04:00
Arksine a3b4543c97 skew_correction: add documentation 
Signed-Off-By:  Eric Callahan <arksine.code@gmail.com>
 2019-06-26 20:16:35 -04:00
Kevin O'Connor d9bddc35a1 docs: Add information on running the regression suite locally 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 17:59:23 -04:00
Kevin O'Connor a2c7fd369c docs: Note tmc2209 and tmc5160 support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:28:39 -04:00
Kevin O'Connor ba27e0aa02 docs: Warn against using "PreloadVE" on KISSlicer 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:18:24 -04:00
Kevin O'Connor 83e6c01ada probe: Allow probe parameters to be specified as g-code parameters 
Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE,
SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE
command (and to commands that indirectly invoke a probe).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-21 14:44:28 -04:00
Kevin O'Connor 8cce3cc8e7 graphstats: Add support for interactive graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-19 21:12:26 -04:00
Kevin O'Connor 8b00580884 gcode_macro: Parse variable_X parameters using ast.literal_eval() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-07 19:33:31 -04:00
Kevin O'Connor a541c2f60e docs: Update Config_Changes.md with "samples" move to probe config section 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:15:47 -04:00
Kevin O'Connor 97adca18c4 docs: Update Delta_Calibrate.md with probe location bias info 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Kevin O'Connor e061029b3a docs: Update Probe_Calibrate.md with information on common probe errors 
Add a section describing PROBE_ACCURACY, describing probe location
bias, and describing probe temperature bias.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Len Trigg 5989f7a8a6 firmware_retraction: Implementation of tuneable G10/G11 firmware retraction (#1617) 
This supports getting and setting of retraction parameters without
having to restart klippy.

Signed-off-by: Len Trigg <lenbok@gmail.com>
 2019-06-06 09:10:09 -04:00
Kevin O'Connor 3f96c0abd8 docs: Minor wording change to Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 10:39:43 -04:00
Kevin O'Connor 962c48ecf7 docs: Fix github pages "liquid" rendering of Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 10:31:03 -04:00
Kevin O'Connor 94c1ad7241 docs: Add an initial Command_Templates.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor a68f577adf gcode_macro: Add support for SET_GCODE_VARIABLE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor ac8f6dfe20 gcode_macro: Rename "status" helper to "printer" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Arksine a238ec6f98 idle_timeout: Add SET_IDLE_TIMEOUT gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-04 09:46:26 -04:00
Kevin O'Connor c54b8da530 gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands 
Add commands to save and restore the current g-code state.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-31 10:23:56 -04:00
Kevin O'Connor d6b69938ab gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command 
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command.  (In particular,
when the following command is an extrude only move - as in
issue #1289.)

Don't apply the offset immediately.  Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-26 11:19:15 -04:00
Kevin O'Connor 500f37821d docs: Improve bltouch v3 documentation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-26 11:09:32 -04:00
Kevin O'Connor c77285287b docs: Try to be more clear that the "paper test" steps need to be run 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-24 22:44:00 -04:00
Kevin O'Connor 6c4c26c319 docs: Minor wording change to Bed_Level.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-23 19:31:44 -04:00
Kevin O'Connor 1856f95503 docs: Recommend OctoPrint 1.3.11 or later 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-20 23:01:04 -04:00
Kevin O'Connor ad12ffa981 docs: Use markdown syntax for http links in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-20 17:19:33 -04:00
Kevin O'Connor fd1dff3f02 docs: Fix numbering in FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-08 16:48:14 -04:00
Kevin O'Connor 73fd292637 docs: Update "avr restart=command" FAQ to point to bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-07 23:02:20 -04:00
Kevin O'Connor 8524602b6e docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 23:10:32 -04:00
Kevin O'Connor 17dd6e5097 docs: Fix markdown table layout in html rendering 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:56:56 -04:00
Kevin O'Connor b5f79d5e77 docs: Simplify main html page now that there is a logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:37:56 -04:00
Kevin O'Connor 57cf0759c0 docs: Add logos to web page 
Also, move docs/index.md to docs/_layouts/home.html.  Add a
docs/_layouts/README file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:35:35 -04:00
Kevin O'Connor 85c01d4b6a docs: Minor node changes to klipper logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:42:40 -04:00
Kevin O'Connor 49b18a6be7 docs: Update logo so that edges overlap 
Overlapping edges reduce the effects of anti-aliasing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 9b960e63fb docs: Add a Klipper logo 
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 6f34ba59cb docs: Add an index page for the www.klipper3d.org website 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 22:00:35 -04:00
Kevin O'Connor 4739e28137 docs: Add a github pages html template 
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:55:41 -04:00
Kevin O'Connor 64e7235e48 docs: Rewrite the Overview.md - just list documents by category 
Replace the Overview.md document description with a list of documents
and a brief description of their contents.  The goal is to make it
easier for users to find information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:45:00 -04:00
Kevin O'Connor cb04e4c45d docs: Fix alignment of tmc2208.svg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 11:34:45 -04:00
Kevin O'Connor c440c6b7aa docs: Start of google pages _config.yml file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-15 11:04:23 -04:00
Kevin O'Connor e3df39245f docs: Fixup github pages 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 22:41:23 -04:00
KevinOConnor 8a6d415745 Update CNAME 2019-04-14 21:25:54 -04:00
KevinOConnor b90a04a5cf Create CNAME 2019-04-14 21:21:14 -04:00
KevinOConnor 63f8d8cc79 Set theme jekyll-theme-leap-day 2019-04-14 21:17:52 -04:00
Kevin O'Connor 8bc9f39c58 docs: Avoid using .. in markdown links 
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 21:12:21 -04:00
Kevin O'Connor 04adde9a02 docs: Update Installation.md to point to list of supported ARM mcus 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-06 18:47:02 -04:00
Kevin O'Connor de124677b0 docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:22:57 -04:00
Kevin O'Connor 9f9262cba8 docs: Minor wording changes to BLTouch.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:20:21 -04:00
Kevin O'Connor 54a2c5d58e BLTouch: Use G90 in the BLTouch.md homing_override example 
Reported by @sgtnoodle.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:49:58 -04:00
Kevin O'Connor a5a6ae83ff docs: Wrap BLTouch.md to 80 columns. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:48:51 -04:00
Kevin O'Connor 6318bdc99b docs: Note the python software dependency update in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 11:20:36 -04:00
Kevin O'Connor 0615ab5f89 docs: Note the use of bus enumerations in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:30:04 -04:00
Kevin O'Connor be6b29fabf sx1509: Convert code to use generic i2c bus support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:29:30 -04:00
Kevin O'Connor 9bd3e80421 docs: Note that graphstats.py can produce different types of graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:24:45 -04:00
Kevin O'Connor 2980c2e12c docs: Minor wording change in MCU_Commands.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:04:56 -04:00
Kevin O'Connor c30a6f2e6b docs: Update Protocol documentation with enumerations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 21:41:33 -04:00
Eugene Krashtan b35e07ca2b docs: STM32F0 benchmarks (#1462) 
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-29 09:38:54 -04:00
Douglas Hammond c105adc80b temperature_fan: Fix. Temperature fan min speed should be used (#1405) 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
 2019-03-28 14:07:40 -04:00
Eugene Krashtan c7330e07a4 stm32f0: Various fixes according to comment: (#1453) 
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section

Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-28 10:21:51 -04:00
Kevin O'Connor 312cabc3f7 docs: Move benchmark information from Debugging.md to new Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-28 09:52:06 -04:00
Kevin O'Connor de7444ca69 docs: Remove spurious executable flag from documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-24 12:17:12 -04:00
Eugene Krashtan b79db3e3d6 docs: Documentation draft for STM32F0 
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
 2019-03-24 12:10:11 -04:00
Kevin O'Connor 9aadc3c7fa docs: Also note that driver_VSENSE was removed from tmc2660 driver 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 22:40:42 -04:00
Kevin O'Connor efab177645 docs: Note tmc2660 driver_HEND default change from 6 to 3 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 20:41:32 -04:00
amblidex 0980b7e4ec tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419) 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-22 20:37:03 -04:00
Frank Kang 06c0463d44 Update sensorless homing documentation to disable second home 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-19 10:55:59 -04:00
Kevin O'Connor b28e95ca1a command: Always pass a string to the DECL_CONSTANT() macro 
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-17 19:38:18 -04:00
Kevin O'Connor 12f6513ba2 docs: Recommend OctoPi v0.16.0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-11 22:13:04 -04:00
Kevin O'Connor 96c4e1c5a0 docs: Update atsam usb transfer benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 21:59:18 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined 
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 13:57:01 -04:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367) 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
 2019-03-08 11:47:17 -05:00
Kevin O'Connor 563bc37073 tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL 
Use the field names from the trinamic specification.  This makes the
field similar to all the other driver_XXX config options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:25:19 -05:00
Kevin O'Connor 89935c6831 docs: Update Config_Changes.md with tmc2660 changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:08:24 -05:00