Commit Graph

22 Commits

Author SHA1 Message Date
BIGTREETECH 1636a9759b
stm32: stm32g0/h7 usb_dfu_bootloader support (#5596)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-30 13:58:00 -04:00
Kevin O'Connor b9e195f098 flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader mode
Use a USB hex id to indicate that the device is already in bootloader
mode.  This makes the rp2040 flashing code similar to the other
boards.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 10:59:11 -04:00
Eric Callahan 1b6ab65833 flash_usb: update shebang to python3
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-06-10 11:23:04 -04:00
Eric Callahan 3e1719bdbb flash_usb: add canboot support
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-06-10 11:23:04 -04:00
Kevin O'Connor 907b47b238 flash_usb: Rework flash_rp2040 code to be similar to other boards
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-01 10:47:31 -04:00
Alex Maclean 8049243221 atsam: Add support for SAM E70
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2022-03-26 11:59:27 -04:00
Lasse Dalegaard a7b01857f5 flash_usb: use sudo for rp2040 flashing
The rp2040 can be flashed without sudo when using udev rules to give the
user permission, but in a standard configuration sudo is required.

Here we make it possible for flash_usb to use sudo for the rp2040
target, and make it the default when using `make flash` for the rp2040.
As for other targets, one can set `NOSUDO=1` to not call through sudo.

Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
2022-01-31 11:10:02 -05:00
Lasse Dalegaard 7c0559c6e6 rp2040: add make flash support
This adds `make flash` support for the rp2040 target. Flashing is
performed using a custom `rp2040_flash` tool that uses the PICOBOOT
protocol. Root is not required.

The user specifies the serial device of the rp2040 they wish to flash as
the device. This device is reset into bootsel mode and `rp2040_flash`
is invoked on the original USB device path.

If the device is already in bootloader mode, the user can specify
'first' as `FLASH_DEVICE` which will simply invoke `rp2040_flash` with
no bus/address options.

Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
2022-01-06 17:32:54 -05:00
henrikssn 430578957f
stm32: Add support for STM32F072 (used in the TurboCAN board) (#4412)
* Add menuconfig option for stm32f072
* Add support for internal temp of stm32f072
* Share the temperature calculation logic between stm32f0x2 MCUs

Signed-off-by: Erik Henriksson <erikhenrikssn@gmail.com>
2021-06-27 20:35:34 -04:00
Arksine ab87af90a3 stm32f4: Add support for HID bootloader
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2020-05-28 14:44:51 -04:00
Arksine 05efccc874 stm32f1: Add support for HID Bootloader
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-05-28 14:44:51 -04:00
Kevin O'Connor 1a69f38e6e flash_usb: Pass -t $CONFIG_MCU to flash_usb on all targets
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-26 18:48:00 -04:00
Kevin O'Connor 538d6ac3a2 flash_usb: Use "-s" option to specify flash offset on atsamd
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-26 18:33:00 -04:00
Kevin O'Connor c694da3753 flash_usb: Change dfu-util to reset the board after a flash on stm32f4
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-26 18:06:32 -04:00
Kevin O'Connor 4b4e309e1b flash_usb: Inform user to manually reset after stm32f4 flash
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-26 17:46:18 -04:00
Kevin O'Connor 5131ec5eb0 stm32: Add support for flashing over usb on stm32f042
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-26 17:11:04 -04:00
Kevin O'Connor 5da6a62759 stm32f4: Add support for flashing over USB
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-26 13:24:59 -04:00
Kevin O'Connor ec3d865b51 stm32f4: Add support for USB on stm32f103
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
Kevin O'Connor ea0f231343 flash_usb: Improve USB reconnect timing
Instead of waiting one second after entering bootloader mode, wait for
the device file to reappear.  This should make the flashing more
resilient to slight timing difference in the OS.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 22:31:31 -04:00
Kevin O'Connor 4718f39b2f flash_usb: Run dfu-util via sudo
Default to running dfu-util via sudo as most machines will not have
the user setup with permissions to access the raw usb device.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-11 22:33:24 -04:00
Kevin O'Connor a5aede52cb flash_usb: Try to make the bossac atsam reboot logic more stable
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 15:06:41 -04:00
Kevin O'Connor 6ffbaa46c5 flash_usb: Add a helper script for flashing Klipper over USB
Add a script to help flash Klipper over USB.  This tool can instruct
Klipper to enter into bootloader mode and it can help track changes in
device name during that transition.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 22:22:41 -05:00