config: Add generic-mightyboard.cfg

Reported by @fragginright.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-01-23 17:49:10 -05:00
parent aea15250ae
commit ff0324b0c2
2 changed files with 116 additions and 0 deletions

View File

@ -0,0 +1,115 @@
# This file contains common pin mappings for the Makerbot
# Mightyboard. To use this config, the firmware should be compiled for
# the Atmel atmega1280.
# See the example.cfg file for a description of available parameters.
[stepper_x]
step_pin: PF1
dir_pin: !PF0
enable_pin: !PF2
step_distance: .010387
endstop_pin: ^!PL1
position_endstop: 152
position_max: 153
position_min: -120
homing_speed: 50
[stepper_y]
step_pin: PF5
dir_pin: !PF4
enable_pin: !PF6
step_distance: .010387
endstop_pin: ^!PL3
position_endstop: 77
position_max: 78
position_min: -84
homing_speed: 50
[stepper_z]
step_pin: PK1
dir_pin: !PK0
enable_pin: !PK2
step_distance: .0025
endstop_pin: !PL6
position_endstop: 0
position_max: 230
position_min: 0
[extruder]
step_pin: PA3
dir_pin: !PA2
enable_pin: !PA4
step_distance: .010387
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PH3
sensor_type: MAX6675
sensor_pin: PE3
spi_software_miso_pin: PE5
spi_software_sclk_pin: PE2
spi_software_mosi_pin: PA1 #dummy mosi pin
control: pid
pid_Kp: 26.414
pid_Ki: 1.115
pid_Kd: 156.5054
min_temp: 0
max_temp: 260
[heater_fan extruder_fan]
pin: PH4
[fan]
pin: PL5
[heater_bed]
heater_pin: PL4
sensor_type: ATC Semitec 104GT-2
sensor_pin: PK7
control: pid
pid_Kp: 70.037
pid_Ki: 1.710
pid_Kd: 717.000
min_temp: 0
max_temp: 130
[mcu]
serial: /dev/ttyAMA0
restart_method: command
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[mcp4018 x_axis_pot]
scl_pin: PJ5
sda_pin: PF3
wiper: 0.50
scale: 0.773
[mcp4018 y_axis_pot]
scl_pin: PJ5
sda_pin: PF7
wiper: 0.50
scale: 0.773
[mcp4018 z_axis_pot]
scl_pin: PJ5
sda_pin: PK3
wiper: 0.50
scale: 0.773
[mcp4018 a_axis_pot]
scl_pin: PJ5
sda_pin: PA5
wiper: 0.50
scale: 0.773
[mcp4018 b_axis_pot]
scl_pin: PJ5
sda_pin: PJ6
wiper: 0.50
scale: 0.773

View File

@ -42,6 +42,7 @@ CONFIG ../../config/printer-wanhao-duplicator-6-2016.cfg
# Printers using the atmega1280 # Printers using the atmega1280
DICTIONARY atmega1280.dict DICTIONARY atmega1280.dict
CONFIG ../../config/generic-mightyboard.cfg
CONFIG ../../config/generic-minitronics1.cfg CONFIG ../../config/generic-minitronics1.cfg
# Printers using the atmega1284p # Printers using the atmega1284p