mirror of https://github.com/Desuuuu/klipper.git
kinematics: Add hybrid-corexy and hybrid-corexz (#4229)
Signed-off-by: Fabrice GALLET <tircown@gmail.com>
This commit is contained in:
parent
f10247a498
commit
f2c74ec023
|
@ -0,0 +1,79 @@
|
|||
# This file is an example config file for hybrid corexy style printers also
|
||||
# known as Markforged kinematic. One may copy and edit this file to configure
|
||||
# a new hybrid corexy printer.
|
||||
|
||||
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
|
||||
# FIRST. Incorrectly configured parameters may cause damage.
|
||||
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
|
||||
[stepper_x]
|
||||
step_pin: PF0
|
||||
dir_pin: PF1
|
||||
enable_pin: !PD7
|
||||
microsteps: 16
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PE5
|
||||
position_endstop: 0
|
||||
position_max: 200
|
||||
homing_speed: 50
|
||||
|
||||
[stepper_y]
|
||||
step_pin: PF6
|
||||
dir_pin: PF7
|
||||
enable_pin: !PF2
|
||||
microsteps: 16
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PJ1
|
||||
position_endstop: 0
|
||||
position_max: 200
|
||||
homing_speed: 50
|
||||
|
||||
[stepper_z]
|
||||
step_pin: PL3
|
||||
dir_pin: PL1
|
||||
enable_pin: !PK0
|
||||
microsteps: 16
|
||||
rotation_distance: 8
|
||||
endstop_pin: ^PD3
|
||||
position_endstop: 0.5
|
||||
position_max: 200
|
||||
|
||||
[extruder]
|
||||
step_pin: PA4
|
||||
dir_pin: PA6
|
||||
enable_pin: !PA2
|
||||
microsteps: 16
|
||||
rotation_distance: 33.500
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
heater_pin: PB4
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: PK5
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
min_temp: 0
|
||||
max_temp: 250
|
||||
|
||||
[heater_bed]
|
||||
heater_pin: PH5
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
sensor_pin: PK6
|
||||
control: watermark
|
||||
min_temp: 0
|
||||
max_temp: 130
|
||||
|
||||
[fan]
|
||||
pin: PH6
|
||||
|
||||
[mcu]
|
||||
serial: /dev/ttyACM0
|
||||
|
||||
[printer]
|
||||
kinematics: hybrid_corexy
|
||||
max_velocity: 300
|
||||
max_accel: 3000
|
||||
max_z_velocity: 25
|
||||
max_z_accel: 30
|
|
@ -0,0 +1,79 @@
|
|||
# This file is an example config file for hybrid corexz style printers also
|
||||
# known as Markforged kinematic. One may copy and edit this file to configure
|
||||
# a new hybrid corexy printer.
|
||||
|
||||
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
|
||||
# FIRST. Incorrectly configured parameters may cause damage.
|
||||
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
|
||||
[stepper_x]
|
||||
step_pin: PF0
|
||||
dir_pin: PF1
|
||||
enable_pin: !PD7
|
||||
microsteps: 16
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PE5
|
||||
position_endstop: 0
|
||||
position_max: 200
|
||||
homing_speed: 50
|
||||
|
||||
[stepper_y]
|
||||
step_pin: PF6
|
||||
dir_pin: PF7
|
||||
enable_pin: !PF2
|
||||
microsteps: 16
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PJ1
|
||||
position_endstop: 0
|
||||
position_max: 200
|
||||
homing_speed: 50
|
||||
|
||||
[stepper_z]
|
||||
step_pin: PL3
|
||||
dir_pin: PL1
|
||||
enable_pin: !PK0
|
||||
microsteps: 16
|
||||
rotation_distance: 8
|
||||
endstop_pin: ^PD3
|
||||
position_endstop: 0.5
|
||||
position_max: 200
|
||||
|
||||
[extruder]
|
||||
step_pin: PA4
|
||||
dir_pin: PA6
|
||||
enable_pin: !PA2
|
||||
microsteps: 16
|
||||
rotation_distance: 33.500
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
heater_pin: PB4
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: PK5
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
min_temp: 0
|
||||
max_temp: 250
|
||||
|
||||
[heater_bed]
|
||||
heater_pin: PH5
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
sensor_pin: PK6
|
||||
control: watermark
|
||||
min_temp: 0
|
||||
max_temp: 130
|
||||
|
||||
[fan]
|
||||
pin: PH6
|
||||
|
||||
[mcu]
|
||||
serial: /dev/ttyACM0
|
||||
|
||||
[printer]
|
||||
kinematics: hybrid_corexz
|
||||
max_velocity: 300
|
||||
max_accel: 3000
|
||||
max_z_velocity: 25
|
||||
max_z_accel: 30
|
|
@ -82,7 +82,8 @@ The printer section controls high level printer settings.
|
|||
[printer]
|
||||
kinematics:
|
||||
# The type of printer in use. This option may be one of: cartesian,
|
||||
# corexy, corexz, delta, rotary_delta, polar, winch, or none. This
|
||||
# corexy, corexz, hybrid-codexy, hybrid-corexz, rotary_delta, delta,
|
||||
# polar, winch, or none. This
|
||||
# parameter must be specified.
|
||||
max_velocity:
|
||||
# Maximum velocity (in mm/s) of the toolhead (relative to the
|
||||
|
@ -365,6 +366,74 @@ max_z_accel:
|
|||
[stepper_z]
|
||||
```
|
||||
|
||||
## Hybrid-CoreXY Kinematics
|
||||
|
||||
See [example-hybrid-corexy.cfg](../config/example-hybrid-corexy.cfg)
|
||||
for an example hybrid corexy kinematics config file.
|
||||
|
||||
This kinematic is also known as Markforged kinematic.
|
||||
|
||||
Only parameters specific to hybrid corexy printers are described here
|
||||
see [common kinematic settings](#common-kinematic-settings) for available
|
||||
parameters.
|
||||
|
||||
```
|
||||
[printer]
|
||||
kinematics: hybrid_corexy
|
||||
max_z_velocity:
|
||||
# This sets the maximum velocity (in mm/s) of movement along the z
|
||||
# axis. The default is to use max_velocity for max_z_velocity.
|
||||
max_z_accel:
|
||||
# This sets the maximum acceleration (in mm/s^2) of movement along
|
||||
# the z axis. The default is to use max_accel for max_z_accel.
|
||||
|
||||
# The stepper_x section is used to describe the X axis as well as the
|
||||
# stepper controlling the X-Y movement.
|
||||
[stepper_x]
|
||||
|
||||
# The stepper_y section is used to describe the stepper controlling
|
||||
# the Y axis.
|
||||
[stepper_y]
|
||||
|
||||
# The stepper_z section is used to describe the stepper controlling
|
||||
# the Z axis.
|
||||
[stepper_z]
|
||||
```
|
||||
|
||||
## Hybrid-CoreXZ Kinematics
|
||||
|
||||
See [example-hybrid-corexz.cfg](../config/example-hybrid-corexz.cfg)
|
||||
for an example hybrid corexz kinematics config file.
|
||||
|
||||
This kinematic is also known as Markforged kinematic.
|
||||
|
||||
Only parameters specific to hybrid corexy printers are described here
|
||||
see [common kinematic settings](#common-kinematic-settings) for available
|
||||
parameters.
|
||||
|
||||
```
|
||||
[printer]
|
||||
kinematics: hybrid_corexz
|
||||
max_z_velocity:
|
||||
# This sets the maximum velocity (in mm/s) of movement along the z
|
||||
# axis. The default is to use max_velocity for max_z_velocity.
|
||||
max_z_accel:
|
||||
# This sets the maximum acceleration (in mm/s^2) of movement along
|
||||
# the z axis. The default is to use max_accel for max_z_accel.
|
||||
|
||||
# The stepper_x section is used to describe the X axis as well as the
|
||||
# stepper controlling the X-Z movement.
|
||||
[stepper_x]
|
||||
|
||||
# The stepper_y section is used to describe the stepper controlling
|
||||
# the Y axis.
|
||||
[stepper_y]
|
||||
|
||||
# The stepper_z section is used to describe the stepper controlling
|
||||
# the Z axis.
|
||||
[stepper_z]
|
||||
```
|
||||
|
||||
## Polar Kinematics
|
||||
|
||||
See [example-polar.cfg](../config/example-polar.cfg) for an example
|
||||
|
|
|
@ -0,0 +1,100 @@
|
|||
# Code for handling the kinematics of hybrid-corexy robots
|
||||
#
|
||||
# Copyright (C) 2021 Fabrice Gallet <tircown@gmail.com>
|
||||
#
|
||||
# This file may be distributed under the terms of the GNU GPLv3 license.
|
||||
import logging
|
||||
import stepper
|
||||
|
||||
# The hybrid-corexy kinematic is also known as Markforged kinematics
|
||||
class HybridCoreXYKinematics:
|
||||
def __init__(self, toolhead, config):
|
||||
self.printer = config.get_printer()
|
||||
printer_config = config.getsection('printer')
|
||||
# itersolve parameters
|
||||
self.rails = [ stepper.PrinterRail(config.getsection('stepper_x')),
|
||||
stepper.LookupMultiRail(config.getsection('stepper_y')),
|
||||
stepper.LookupMultiRail(config.getsection('stepper_z'))]
|
||||
self.rails[2].get_endstops()[0][0].add_stepper(
|
||||
self.rails[0].get_steppers()[0])
|
||||
self.rails[0].setup_itersolve('corexy_stepper_alloc', '-')
|
||||
self.rails[1].setup_itersolve('cartesian_stepper_alloc', 'y')
|
||||
self.rails[2].setup_itersolve('cartesian_stepper_alloc', 'z')
|
||||
ranges = [r.get_range() for r in self.rails]
|
||||
self.axes_min = toolhead.Coord(*[r[0] for r in ranges], e=0.)
|
||||
self.axes_max = toolhead.Coord(*[r[1] for r in ranges], e=0.)
|
||||
for s in self.get_steppers():
|
||||
s.set_trapq(toolhead.get_trapq())
|
||||
toolhead.register_step_generator(s.generate_steps)
|
||||
self.printer.register_event_handler("stepper_enable:motor_off",
|
||||
self._motor_off)
|
||||
# Setup boundary checks
|
||||
max_velocity, max_accel = toolhead.get_max_velocity()
|
||||
self.max_z_velocity = config.getfloat(
|
||||
'max_z_velocity', max_velocity, above=0., maxval=max_velocity)
|
||||
self.max_z_accel = config.getfloat(
|
||||
'max_z_accel', max_accel, above=0., maxval=max_accel)
|
||||
self.limits = [(1.0, -1.0)] * 3
|
||||
def get_steppers(self):
|
||||
return [s for rail in self.rails for s in rail.get_steppers()]
|
||||
def calc_tag_position(self):
|
||||
pos = [rail.get_tag_position() for rail in self.rails]
|
||||
return [pos[0] + pos[1], pos[1], pos[2]]
|
||||
def set_position(self, newpos, homing_axes):
|
||||
for i, rail in enumerate(self.rails):
|
||||
rail.set_position(newpos)
|
||||
if i in homing_axes:
|
||||
self.limits[i] = rail.get_range()
|
||||
def note_z_not_homed(self):
|
||||
# Helper for Safe Z Home
|
||||
self.limits[2] = (1.0, -1.0)
|
||||
def _home_axis(self, homing_state, axis, rail):
|
||||
position_min, position_max = rail.get_range()
|
||||
hi = rail.get_homing_info()
|
||||
homepos = [None, None, None, None]
|
||||
homepos[axis] = hi.position_endstop
|
||||
forcepos = list(homepos)
|
||||
if hi.positive_dir:
|
||||
forcepos[axis] -= 1.5 * (hi.position_endstop - position_min)
|
||||
else:
|
||||
forcepos[axis] += 1.5 * (position_max - hi.position_endstop)
|
||||
# Perform homing
|
||||
homing_state.home_rails([rail], forcepos, homepos)
|
||||
def home(self, homing_state):
|
||||
for axis in homing_state.get_axes():
|
||||
self._home_axis(homing_state, axis, self.rails[axis])
|
||||
def _motor_off(self, print_time):
|
||||
self.limits = [(1.0, -1.0)] * 3
|
||||
def _check_endstops(self, move):
|
||||
end_pos = move.end_pos
|
||||
for i in (0, 1, 2):
|
||||
if (move.axes_d[i]
|
||||
and (end_pos[i] < self.limits[i][0]
|
||||
or end_pos[i] > self.limits[i][1])):
|
||||
if self.limits[i][0] > self.limits[i][1]:
|
||||
raise move.move_error("Must home axis first")
|
||||
raise move.move_error()
|
||||
def check_move(self, move):
|
||||
limits = self.limits
|
||||
xpos, ypos = move.end_pos[:2]
|
||||
if (xpos < limits[0][0] or xpos > limits[0][1]
|
||||
or ypos < limits[1][0] or ypos > limits[1][1]):
|
||||
self._check_endstops(move)
|
||||
if not move.axes_d[2]:
|
||||
# Normal XY move - use defaults
|
||||
return
|
||||
# Move with Z - update velocity and accel for slower Z axis
|
||||
self._check_endstops(move)
|
||||
z_ratio = move.move_d / abs(move.axes_d[2])
|
||||
move.limit_speed(
|
||||
self.max_z_velocity * z_ratio, self.max_z_accel * z_ratio)
|
||||
def get_status(self, eventtime):
|
||||
axes = [a for a, (l, h) in zip("xyz", self.limits) if l <= h]
|
||||
return {
|
||||
'homed_axes': "".join(axes),
|
||||
'axis_minimum': self.axes_min,
|
||||
'axis_maximum': self.axes_max,
|
||||
}
|
||||
|
||||
def load_kinematics(toolhead, config):
|
||||
return HybridCoreXYKinematics(toolhead, config)
|
|
@ -0,0 +1,100 @@
|
|||
# Code for handling the kinematics of hybrid-corexz robots
|
||||
#
|
||||
# Copyright (C) 2021 Fabrice Gallet <tircown@gmail.com>
|
||||
#
|
||||
# This file may be distributed under the terms of the GNU GPLv3 license.
|
||||
import logging
|
||||
import stepper
|
||||
|
||||
# The hybrid-corexz kinematic is also known as Markforged kinematics
|
||||
class HybridCoreXZKinematics:
|
||||
def __init__(self, toolhead, config):
|
||||
self.printer = config.get_printer()
|
||||
printer_config = config.getsection('printer')
|
||||
# itersolve parameters
|
||||
self.rails = [ stepper.PrinterRail(config.getsection('stepper_x')),
|
||||
stepper.LookupMultiRail(config.getsection('stepper_y')),
|
||||
stepper.LookupMultiRail(config.getsection('stepper_z'))]
|
||||
self.rails[2].get_endstops()[0][0].add_stepper(
|
||||
self.rails[0].get_steppers()[0])
|
||||
self.rails[0].setup_itersolve('corexz_stepper_alloc', '-')
|
||||
self.rails[1].setup_itersolve('cartesian_stepper_alloc', 'y')
|
||||
self.rails[2].setup_itersolve('cartesian_stepper_alloc', 'z')
|
||||
ranges = [r.get_range() for r in self.rails]
|
||||
self.axes_min = toolhead.Coord(*[r[0] for r in ranges], e=0.)
|
||||
self.axes_max = toolhead.Coord(*[r[1] for r in ranges], e=0.)
|
||||
for s in self.get_steppers():
|
||||
s.set_trapq(toolhead.get_trapq())
|
||||
toolhead.register_step_generator(s.generate_steps)
|
||||
self.printer.register_event_handler("stepper_enable:motor_off",
|
||||
self._motor_off)
|
||||
# Setup boundary checks
|
||||
max_velocity, max_accel = toolhead.get_max_velocity()
|
||||
self.max_z_velocity = config.getfloat(
|
||||
'max_z_velocity', max_velocity, above=0., maxval=max_velocity)
|
||||
self.max_z_accel = config.getfloat(
|
||||
'max_z_accel', max_accel, above=0., maxval=max_accel)
|
||||
self.limits = [(1.0, -1.0)] * 3
|
||||
def get_steppers(self):
|
||||
return [s for rail in self.rails for s in rail.get_steppers()]
|
||||
def calc_tag_position(self):
|
||||
pos = [rail.get_tag_position() for rail in self.rails]
|
||||
return [pos[0] + pos[2], pos[1], pos[2]]
|
||||
def set_position(self, newpos, homing_axes):
|
||||
for i, rail in enumerate(self.rails):
|
||||
rail.set_position(newpos)
|
||||
if i in homing_axes:
|
||||
self.limits[i] = rail.get_range()
|
||||
def note_z_not_homed(self):
|
||||
# Helper for Safe Z Home
|
||||
self.limits[2] = (1.0, -1.0)
|
||||
def _home_axis(self, homing_state, axis, rail):
|
||||
position_min, position_max = rail.get_range()
|
||||
hi = rail.get_homing_info()
|
||||
homepos = [None, None, None, None]
|
||||
homepos[axis] = hi.position_endstop
|
||||
forcepos = list(homepos)
|
||||
if hi.positive_dir:
|
||||
forcepos[axis] -= 1.5 * (hi.position_endstop - position_min)
|
||||
else:
|
||||
forcepos[axis] += 1.5 * (position_max - hi.position_endstop)
|
||||
# Perform homing
|
||||
homing_state.home_rails([rail], forcepos, homepos)
|
||||
def home(self, homing_state):
|
||||
for axis in homing_state.get_axes():
|
||||
self._home_axis(homing_state, axis, self.rails[axis])
|
||||
def _motor_off(self, print_time):
|
||||
self.limits = [(1.0, -1.0)] * 3
|
||||
def _check_endstops(self, move):
|
||||
end_pos = move.end_pos
|
||||
for i in (0, 1, 2):
|
||||
if (move.axes_d[i]
|
||||
and (end_pos[i] < self.limits[i][0]
|
||||
or end_pos[i] > self.limits[i][1])):
|
||||
if self.limits[i][0] > self.limits[i][1]:
|
||||
raise move.move_error("Must home axis first")
|
||||
raise move.move_error()
|
||||
def check_move(self, move):
|
||||
limits = self.limits
|
||||
xpos, ypos = move.end_pos[:2]
|
||||
if (xpos < limits[0][0] or xpos > limits[0][1]
|
||||
or ypos < limits[1][0] or ypos > limits[1][1]):
|
||||
self._check_endstops(move)
|
||||
if not move.axes_d[2]:
|
||||
# Normal XY move - use defaults
|
||||
return
|
||||
# Move with Z - update velocity and accel for slower Z axis
|
||||
self._check_endstops(move)
|
||||
z_ratio = move.move_d / abs(move.axes_d[2])
|
||||
move.limit_speed(
|
||||
self.max_z_velocity * z_ratio, self.max_z_accel * z_ratio)
|
||||
def get_status(self, eventtime):
|
||||
axes = [a for a, (l, h) in zip("xyz", self.limits) if l <= h]
|
||||
return {
|
||||
'homed_axes': "".join(axes),
|
||||
'axis_minimum': self.axes_min,
|
||||
'axis_maximum': self.axes_max,
|
||||
}
|
||||
|
||||
def load_kinematics(toolhead, config):
|
||||
return HybridCoreXZKinematics(toolhead, config)
|
|
@ -6,6 +6,8 @@ DICTIONARY atmega2560.dict
|
|||
CONFIG ../../config/example-cartesian.cfg
|
||||
CONFIG ../../config/example-corexy.cfg
|
||||
CONFIG ../../config/example-corexz.cfg
|
||||
CONFIG ../../config/example-hybrid-corexy.cfg
|
||||
CONFIG ../../config/example-hybrid-corexz.cfg
|
||||
CONFIG ../../config/example-delta.cfg
|
||||
CONFIG ../../config/example-rotary-delta.cfg
|
||||
CONFIG ../../config/example-winch.cfg
|
||||
|
|
Loading…
Reference in New Issue