diff --git a/config/generic-radds.cfg b/config/generic-radds.cfg
index 9f99d6f7..f3cee435 100644
--- a/config/generic-radds.cfg
+++ b/config/generic-radds.cfg
@@ -4,55 +4,55 @@
 
 # See docs/Config_Reference.md for a description of parameters.
 
-# Temp sensor pins: analog0..analog4
-# Mosfet Pins: ar7 (Heatbed), ar8, ar9, ar11, ar12, ar13
+# Temp sensor pins: PA16..PA6
+# Mosfet Pins: PC23 (Heatbed), PC22, PC21, PD7, PD8, PB27
 
 [stepper_x]
-step_pin: ar24
-dir_pin: ar23
-enable_pin: ar26
+step_pin: PA15
+dir_pin: PA14
+enable_pin: PD1
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar28
-#endstop_pin: ^ar34
+endstop_pin: ^PD3
+#endstop_pin: ^PC2
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_y]
-step_pin: ar17
-dir_pin: !ar16
-enable_pin: ar22
+step_pin: PA12
+dir_pin: !PA13
+enable_pin: PB26
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar30
-#endstop_pin: ^ar36
+endstop_pin: ^PD9
+#endstop_pin: ^PC4
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_z]
-step_pin: ar2
-dir_pin: ar3
-enable_pin: ar15
+step_pin: PB25
+dir_pin: PC28
+enable_pin: PD5
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^ar32
-#endstop_pin: ^ar38
+endstop_pin: ^PD10
+#endstop_pin: ^PC6
 position_endstop: 0.5
 position_max: 200
 
 [extruder]
-step_pin: analog7
-dir_pin: analog6
-enable_pin: analog8
+step_pin: PA2
+dir_pin: PA3
+enable_pin: PB17
 microsteps: 16
 rotation_distance: 33.500
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar13
+heater_pin: PB27
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog0
+sensor_pin: PA16
 control: pid
 pid_Kp: 22.2
 pid_Ki: 1.08
@@ -61,32 +61,31 @@ min_temp: 0
 max_temp: 250
 
 #[extruder1]
-#step_pin:           analog10
-#dir_pin:            analog9
-#enable_pin:         analog11
+#step_pin:           PB19
+#dir_pin:            PB18
+#enable_pin:         PB20
 
 #[extruder2]
-#step_pin:           ar51
-#dir_pin:            ar53
-#enable_pin:         ar49
+#step_pin:           PC12
+#dir_pin:            PB14
+#enable_pin:         PC14
 
 [heater_bed]
-heater_pin: ar7
+heater_pin: PC23
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog1
+sensor_pin: PA24
 control: watermark
 min_temp: 0
 max_temp: 130
 
 [fan]
-pin: ar9
+pin: PC21
 
 #[heater_fan nozzle_cooling_fan]
-#pin: ar8
+#pin: PC22
 
 [mcu]
 serial: /dev/ttyACM0
-pin_map: arduino
 
 [printer]
 kinematics: cartesian
@@ -98,18 +97,18 @@ max_z_accel: 100
 # "RepRapDiscount 2004 Smart Controller" type displays
 #[display]
 #lcd_type: hd44780
-#rs_pin: ar42
-#e_pin: ar43
-#d4_pin: ar44
-#d5_pin: ar45
-#d6_pin: ar46
-#d7_pin: ar47
-#encoder_pins: ^ar52, ^ar50
-#click_pin: ^!ar48
+#rs_pin: PA19
+#e_pin: PA20
+#d4_pin: PC19
+#d5_pin: PC18
+#d6_pin: PC17
+#d7_pin: PC16
+#encoder_pins: ^PB21, ^PC13
+#click_pin: ^!PC15
 
 # "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
 #[display]
 #lcd_type: st7920
-#cs_pin: ar42
-#sclk_pin: ar44
-#sid_pin: ar43
+#cs_pin: PA19
+#sclk_pin: PC19
+#sid_pin: PA20