From ef7d4dd3cbf7855b80c8dbf28b2e13f2d38a2f10 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Thu, 17 May 2018 11:24:58 -0400 Subject: [PATCH] config: Add example generic-smoothieboard.cfg config file Signed-off-by: Kevin O'Connor --- config/generic-smoothieboard.cfg | 87 ++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 config/generic-smoothieboard.cfg diff --git a/config/generic-smoothieboard.cfg b/config/generic-smoothieboard.cfg new file mode 100644 index 00000000..0366e4f6 --- /dev/null +++ b/config/generic-smoothieboard.cfg @@ -0,0 +1,87 @@ +# This file contains common pin mappings for Smoothieboard. To use this +# config, the firmware should be compiled for the LPC176x. + +# THIS FILE HAS NOT BEEN TESTED - PROCEED WITH CAUTION! + +# See the example.cfg file for a description of available parameters. + +[stepper_x] +step_pin: P2.0 +dir_pin: P0.5 +enable_pin: !P0.4 +step_distance: .0125 +endstop_pin: ^P1.24 +#endstop_pin: ^P1.25 +position_endstop: 0 +position_max: 200 +homing_speed: 50 + +[stepper_y] +step_pin: P2.1 +dir_pin: !P0.11 +enable_pin: !P0.10 +step_distance: .0125 +endstop_pin: ^P1.26 +#endstop_pin: ^P1.27 +position_endstop: 0 +position_max: 200 +homing_speed: 50 + +[stepper_z] +step_pin: P2.2 +dir_pin: P0.20 +enable_pin: !P0.19 +step_distance: .0025 +endstop_pin: ^P1.28 +#endstop_pin: ^P1.29 +position_endstop: 0.5 +position_max: 200 + +[extruder] +step_pin: P2.3 +dir_pin: P0.22 +enable_pin: !P0.21 +step_distance: .002 +nozzle_diameter: 0.400 +filament_diameter: 1.750 +heater_pin: P2.7 +sensor_type: EPCOS 100K B57560G104F +sensor_pin: P0.24 +control: pid +pid_Kp: 22.2 +pid_Ki: 1.08 +pid_Kd: 114 +min_temp: 0 +max_temp: 250 + +#[extruder1] +#step_pin: P2.8 +#dir_pin: P2.13 +#enable_pin: !P4.29 +#heater_pin: P2.6 +#sensor_pin: P0.25 +#... + +[heater_bed] +heater_pin: P2.5 +sensor_type: EPCOS 100K B57560G104F +sensor_pin: P0.23 +control: watermark +min_temp: 0 +max_temp: 130 + +[fan] +pin: P2.4 + +[mcu] +serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 + +[printer] +kinematics: cartesian +max_velocity: 300 +max_accel: 3000 +max_z_velocity: 5 +max_z_accel: 100 + +[static_digital_output leds] +pins: P1.18, P1.19, P1.20, P1.21, P4.28