From e820ea31413d83db801e63fc5ceb0bdceb009570 Mon Sep 17 00:00:00 2001
From: Kevin O'Connor <kevin@koconnor.net>
Date: Tue, 18 Dec 2018 20:57:59 -0500
Subject: [PATCH] config: Add printer-micromake-d1-2016.cfg example config file

Reported by IRC user "Xantos".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---
 config/printer-micromake-d1-2016.cfg | 79 ++++++++++++++++++++++++++++
 test/klippy/printers.test            |  1 +
 2 files changed, 80 insertions(+)
 create mode 100644 config/printer-micromake-d1-2016.cfg

diff --git a/config/printer-micromake-d1-2016.cfg b/config/printer-micromake-d1-2016.cfg
new file mode 100644
index 00000000..88dd53f8
--- /dev/null
+++ b/config/printer-micromake-d1-2016.cfg
@@ -0,0 +1,79 @@
+# This file contains a configuration for the "Micromake D1" delta
+# printer (using the Makeboard 1.3 electronics). To use this config,
+# the firmware should be compiled for the AVR atmega2560.
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_a]
+step_pin: ar54
+dir_pin: !ar55
+enable_pin: !ar38
+step_distance: .01
+endstop_pin: ^ar2
+homing_speed: 100
+position_endstop: 319.5
+arm_length: 217.0
+
+[stepper_b]
+step_pin: ar60
+dir_pin: !ar61
+enable_pin: !ar56
+step_distance: .01
+endstop_pin: ^ar15
+
+[stepper_c]
+step_pin: ar46
+dir_pin: !ar48
+enable_pin: !ar62
+step_distance: .01
+endstop_pin: ^ar19
+
+[extruder]
+step_pin: ar26
+dir_pin: ar28
+enable_pin: !ar24
+step_distance: 0.006271
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: ar10
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: analog13
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+max_extrude_only_distance: 100.0
+
+[fan]
+pin: ar9
+
+[mcu]
+serial: /dev/ttyACM0
+pin_map: arduino
+
+[printer]
+kinematics: delta
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 150
+delta_radius: 95
+
+[delta_calibrate]
+radius: 80
+
+#[probe]
+#pin: ^!ar18
+
+[display]
+lcd_type: hd44780
+rs_pin: ar16
+e_pin: ar17
+d4_pin: ar23
+d5_pin: ar25
+d6_pin: ar27
+d7_pin: ar29
+encoder_pins: ^ar31, ^ar33
+click_pin: ^!ar35
+kill_pin: ^!ar41
diff --git a/test/klippy/printers.test b/test/klippy/printers.test
index 524b358b..c6d83f6a 100644
--- a/test/klippy/printers.test
+++ b/test/klippy/printers.test
@@ -21,6 +21,7 @@ CONFIG ../../config/printer-anycubic-kossel-plus-2017.cfg
 CONFIG ../../config/printer-creality-cr10s-2017.cfg
 CONFIG ../../config/printer-lulzbot-taz6-2017.cfg
 CONFIG ../../config/printer-makergear-m2-2012.cfg
+CONFIG ../../config/printer-micromake-d1-2016.cfg
 CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
 CONFIG ../../config/printer-velleman-k8200-2013.cfg
 CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg