Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Point to beaglebone.md from the main installation document 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-10-11 20:50:24 -04:00
parent 00d541b767
commit d3eb148cfa
2 changed files with 9 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Installation.md
View File

@ -1,15 +1,17 @@
These instructions assume the software will run on a Raspberry Pi
computer in conjunction with OctoPrint. It is recommended that a
Raspberry Pi 2 or Raspberry Pi 3 computer be used as the host
machine.
computer in conjunction with OctoPrint. (See the
[Beaglebone specific instructions](beaglebone.md) if using a
Beaglebone.) It is recommended that a Raspberry Pi 2 or Raspberry Pi 3
computer be used as the host machine.
It should be possible to run the Klipper host software on any computer
running a recent Linux distribution, but doing so will require Linux
admin knowledge to translate these installation instructions to the
particulars of that machine.
Klipper currently supports Atmel ATmega based micro-controllers and
Arduino Due (Atmel SAM3x8e ARM micro-controller) printers.
Klipper currently supports Atmel ATmega based micro-controllers,
Arduino Due (Atmel SAM3x8e ARM micro-controller), and
[Beaglebone PRU](beaglebone.md) based printers.
Prepping an OS image
====================

4
docs/beaglebone.md
View File

@ -1,5 +1,5 @@
This document describes the process of running Klipper on a Beaglebone
PRU. The PRU support is experimental.
PRU.
Building an OS image
====================
@ -91,4 +91,4 @@ Remaining configuration
Complete the installation by configuring Klipper and Octoprint
following the instructions in
[the main installation document](Installation.md#Configuring_Klipper).
[the main installation document](Installation.md#configuring-klipper).