config: Azteeg X5 mini config (#1193)

Signed-off-by: Ax Smith-Laffin <ax@darknetweb.co.uk>
This commit is contained in:
AxMod 3D Print 2019-02-08 20:00:23 +00:00 committed by KevinOConnor
parent 161cde4c5c
commit cd6a181429
2 changed files with 96 additions and 0 deletions

View File

@ -0,0 +1,95 @@
# This file contains common pin mappings for the Azteeg X5 Mini v3. To use
# this config, the firmware should be compiled for the LPC176x.
# The "make flash" command does not work on the Azteeg X5 Mini v3.
# Instead, after running "make", copy the generated "out/klipper.bin"
# file to a file named "firmware.bin" on an SD card and then restart
# the Azteeg X5 Mini v3 with that SD card.
# See the example.cfg file for a description of available parameters.
[stepper_x]
step_pin: P2.1
dir_pin: P0.11
enable_pin: !P0.10
step_distance: .0125
endstop_pin: ^P1.24
position_endstop: 0
position_max: 200
homing_speed: 50
[stepper_y]
step_pin: P2.2
dir_pin: P0.20
enable_pin: !P0.19
step_distance: .0125
endstop_pin: ^P1.26
position_endstop: 0
position_max: 200
homing_speed: 50
[stepper_z]
step_pin: P2.3
dir_pin: P0.22
enable_pin: !P0.21
step_distance: .0125
endstop_pin: ^P1.28
position_endstop: 0
position_max: 200
homing_speed: 50
[extruder]
step_pin: P2.0
dir_pin: P0.5
enable_pin: !P0.4
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.5
sensor_type: EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 250
[heater_bed]
heater_pin: P2.7
sensor_type: EPCOS 100K B57560G104F
sensor_pin: P0.23
control: watermark
min_temp: 0
max_temp: 130
[fan]
pin: P0.26
[mcu]
serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[mcp4451 stepper_digipot1]
i2c_address: 44
# Scale the config so that wiper values can be specified in amps.
scale: 2
# wiper 0 is X (aka alpha), 1 is Y, 2 is Z, 3 is E0
wiper_0: 1.0
wiper_1: 1.0
wiper_2: 1.0
wiper_3: 1.0
# Mini Viki2 LCD - this board does not work with Reprap LCDs
#[display]
#lcd_type: uc1701
#cs_pin: P0.16
#a0_pin: P2.6
#encoder_pins: ^!P3.25, ^P3.26
#click_pin: ^!P2.11

View File

@ -65,6 +65,7 @@ DICTIONARY lpc176x.dict
CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
CONFIG ../../config/generic-re-arm.cfg CONFIG ../../config/generic-re-arm.cfg
CONFIG ../../config/generic-smoothieboard.cfg CONFIG ../../config/generic-smoothieboard.cfg
CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg
# Printers using the PRU # Printers using the PRU
DICTIONARY pru.dict host=linuxprocess.dict DICTIONARY pru.dict host=linuxprocess.dict