diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md
index 9c9755ff..d2c2c0b8 100644
--- a/docs/Config_Reference.md
+++ b/docs/Config_Reference.md
@@ -2471,27 +2471,29 @@ clock_pin:
 #initial_BLUE: 0.0
 #   See the "neopixel" section for information on these parameters.
 ```
+
 ## [PCA9533]
+
 PCA9533 LED support. The PCA9533 is used on the mightyboard.
 
 ```
 [pca9533 my_pca9533]
 #i2c_address: 98
-#   The i2c address that the chip is using on the i2c bus. The default
-#   is 98 for the PCA9533/1, 99 for the PCA9533/2.
+#   The i2c address that the chip is using on the i2c bus. Use 98 for
+#   the PCA9533/1, 99 for the PCA9533/2. The default is 98.
 #i2c_mcu:
 #i2c_bus:
 #i2c_speed:
 #   See the "common I2C settings" section for a description of the
 #   above parameters.
-#initial_RED: 1
-#initial_GREEN: 1
-#initial_BLUE: 1
-#initial_WHITE: 1
-#    The PCA9533 only supports 1 or 0, any other values will be considered as 1. The default is 0.
-#    On the mightyboard, the white led is not populated.
-#    Use GCODE to modify led values after startup.
-#    set_led led=my_pca9533 red=1 green=1 blue=1
+#initial_RED: 0
+#initial_GREEN: 0
+#initial_BLUE: 0
+#initial_WHITE: 0
+#   The PCA9533 only supports 1 or 0. The default is 0. On the
+#   mightyboard, the white led is not populated.
+#   Use GCODE to modify led values after startup.
+#   set_led led=my_pca9533 red=1 green=1 blue=1
 ```
 
 ## [gcode_button]