config: Minor updates to printer-velleman-k8800-2017.cfg

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-05-06 11:38:31 -04:00
parent 71f4739c8b
commit c9e8298c36
2 changed files with 5 additions and 8 deletions

View File

@ -1,8 +1,8 @@
# This file contains common pin mappings for the Velleman K8800 printers (circa 2017).
# To use this config, the firmware should be compiled for the AVR atmega2560.
# This file contains common pin mappings for the Velleman K8800
# printers (circa 2017). To use this config, the firmware should be
# compiled for the AVR atmega2560.
# See docs/Config_Reference.md for a description of parameters.
# Arduino aliases for atmega2560/1280 (Arduino mega) boards
[board_pins]
aliases:
# Common EXP1 header found on many "all-in-one" ramps clones
@ -16,8 +16,6 @@ aliases:
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
baud: 250000
restart_method: arduino
# X
[stepper_a]
@ -25,7 +23,7 @@ step_pin: PF0
dir_pin: PF1
enable_pin: !PD7
microsteps: 32
rotation_distance: 55
rotation_distance: 55 # 22 tooth pulley with 2.5mm pitch belt
endstop_pin: ^!PE5
homing_speed: 50
position_endstop: 295
@ -67,8 +65,6 @@ pid_Kd: 50.42
min_temp: 0
max_temp: 295
[printer]
kinematics: delta
max_velocity: 250

View File

@ -50,6 +50,7 @@ CONFIG ../../config/printer-sunlu-s8-2020.cfg
CONFIG ../../config/printer-tevo-flash-2018.cfg
CONFIG ../../config/printer-tevo-tarantula-pro-2020.cfg
CONFIG ../../config/printer-velleman-k8200-2013.cfg
CONFIG ../../config/printer-velleman-k8800-2017.cfg
CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg