From c7e0372c5de4680760721674dc86959dc5d239ec Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 23 May 2022 15:50:43 -0400 Subject: [PATCH] docs: Line wrapping in G-Codes.md Signed-off-by: Kevin O'Connor --- docs/G-Codes.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 7d6313d5..4dcbe729 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -987,7 +987,9 @@ number of knob turns to adjust the bed level. If DIRECTION is specified, the knob turns will all be in the same direction, clockwise (CW) or counterclockwise (CCW). See the PROBE command for details on the optional probe parameters. IMPORTANT: You MUST always do a G28 -before using this command. If MAX_DEVIATION is specified, the command will raise a gcode error if any difference in the screw height relative to the base screw height is greater than the value provided. +before using this command. If MAX_DEVIATION is specified, the command +will raise a gcode error if any difference in the screw height +relative to the base screw height is greater than the value provided. ### [sdcard_loop]