probe: Infer position_endstop when using probe:z_virtual_offset

Don't require (or permit) the user to specify a stepper_z
position_endstop when using the probe:z_virtual_offset mechanism.  In
that case the position_endstop should always equal the probe's
z_offset - so no need to have the user specify it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-09-26 19:29:58 -04:00 committed by KevinOConnor
parent a9a0bb87fa
commit c5d4e14298
5 changed files with 15 additions and 43 deletions

View File

@ -13,7 +13,9 @@
# QUERY_PROBE extended g-code commands become available. The probe
# section also creates a virtual "probe:z_virtual_endstop" pin. One
# may set the stepper_z endstop_pin to this virtual pin on cartesian
# style printers that use the probe in place of a z endstop.
# style printers that use the probe in place of a z endstop. If using
# "probe:z_virtual_endstop" then do not define a position_endstop in
# the stepper_z config section.
#[probe]
#pin: ar15
# Probe detection pin. This parameter must be provided.

View File

@ -30,8 +30,6 @@ deactivate_gcode:
# Example bed_tilt config section
[bed_tilt]
#x_adjust:
#y_adjust:
points:
100,100
10,10
@ -45,8 +43,8 @@ points:
# If the BLTouch is used to home the Z axis, then define a
# homing_override section, use probe:z_virtual_endstop as the
# endstop_pin in the stepper_z section, and set the position_endstop
# in the stepper_z section to match the probe's z_offset.
# endstop_pin in the stepper_z section, and do not set
# position_endstop in the stepper_z section.
#[homing_override]
#set_position_z: 5
#axes: z

View File

@ -138,11 +138,6 @@ class BedMeshCalibrate:
self._init_probe_params(config, points)
self.probe_helper = probe.ProbePointsHelper(
config, self.probe_finalize, points)
self.z_endstop_pos = None
if config.has_section('stepper_z'):
zconfig = config.getsection('stepper_z')
self.z_endstop_pos = zconfig.getfloat(
'position_endstop', None)
self.gcode = self.printer.lookup_object('gcode')
self.gcode.register_command(
'BED_MESH_CALIBRATE', self.cmd_BED_MESH_CALIBRATE,
@ -227,18 +222,6 @@ class BedMeshCalibrate:
self.probe_params['x_offset'] = offsets[0]
self.probe_params['y_offset'] = offsets[1]
z_offset = offsets[2]
if self.probe_helper.get_last_xy_home_positon() is not None \
and self.z_endstop_pos is not None:
# Using probe as a virtual endstop, warn user if the
# stepper_z position_endstop is different
if self.z_endstop_pos != z_offset:
z_msg = "bed_mesh: WARN - probe z_offset is not" \
" equal to Z position_endstop\n"
z_msg += "[probe] z_offset: %.4f\n" % z_offset
z_msg += "[stepper_z] position_endstop: %.4f" \
% self.z_endstop_pos
logging.info(z_msg)
self.gcode.respond_info(z_msg)
x_cnt = self.probe_params['x_count']
y_cnt = self.probe_params['y_count']
# create a 2-D array representing the probed z-positions.

View File

@ -38,7 +38,6 @@ class PrinterProbe:
self.mcu_probe = ProbeEndstopWrapper(config, self.mcu_probe)
# Create z_virtual_endstop pin
ppins.register_chip('probe', self)
self.z_virtual_endstop = None
# Register PROBE/QUERY_PROBE commands
self.gcode = self.printer.lookup_object('gcode')
self.gcode.register_command(
@ -54,15 +53,9 @@ class PrinterProbe:
raise pins.error("Probe virtual endstop only useful as endstop pin")
if pin_params['invert'] or pin_params['pullup']:
raise pins.error("Can not pullup/invert probe virtual endstop")
self.z_virtual_endstop = ProbeVirtualEndstop(
self.printer, self.mcu_probe)
return self.z_virtual_endstop
return ProbeVirtualEndstop(self, self.mcu_probe)
def get_offsets(self):
return self.x_offset, self.y_offset, self.z_offset
def last_home_position(self):
if self.z_virtual_endstop is None:
return None
return self.z_virtual_endstop.position
cmd_PROBE_help = "Probe Z-height at current XY position"
def cmd_PROBE(self, params):
toolhead = self.printer.lookup_object('toolhead')
@ -112,25 +105,24 @@ class ProbeEndstopWrapper:
self.gcode.run_script_from_command(self.deactivate_gcode)
self.mcu_endstop.home_finalize()
# Wrapper that records the last XY position of a virtual endstop probe
# Wrapper for probe:z_virtual_endstop handling
class ProbeVirtualEndstop:
def __init__(self, printer, mcu_endstop):
self.printer = printer
def __init__(self, probe, mcu_endstop):
self.probe = probe
self.mcu_endstop = mcu_endstop
self.position = None
# Wrappers
self.get_mcu = self.mcu_endstop.get_mcu
self.add_stepper = self.mcu_endstop.add_stepper
self.get_steppers = self.mcu_endstop.get_steppers
self.home_start = self.mcu_endstop.home_start
self.home_wait = self.mcu_endstop.home_wait
self.home_finalize = self.mcu_endstop.home_finalize
self.query_endstop = self.mcu_endstop.query_endstop
self.query_endstop_wait = self.mcu_endstop.query_endstop_wait
self.home_prepare = self.mcu_endstop.home_prepare
self.TimeoutError = self.mcu_endstop.TimeoutError
def home_finalize(self):
self.position = self.printer.lookup_object('toolhead').get_position()
self.mcu_endstop.home_finalize()
def get_position_endstop(self):
return self.probe.get_offsets()[2]
# Helper code that can probe a series of points and report the
# position at each point.
@ -164,11 +156,6 @@ class ProbePointsHelper:
self.gcode = self.toolhead = None
def get_lift_speed(self):
return self.lift_speed
def get_last_xy_home_positon(self):
probe = self.printer.lookup_object('probe', None)
if probe is None:
return None
return probe.last_home_position()
def _lift_z(self, z_pos, add=False, speed=None):
# Lift toolhead
curpos = self.toolhead.get_position()

View File

@ -121,7 +121,9 @@ class PrinterRail:
mcu_endstop = ppins.setup_pin('endstop', config.get('endstop_pin'))
self.endstops = [(mcu_endstop, self.name)]
stepper.add_to_endstop(mcu_endstop)
if default_position_endstop is None:
if hasattr(mcu_endstop, "get_position_endstop"):
self.position_endstop = mcu_endstop.get_position_endstop()
elif default_position_endstop is None:
self.position_endstop = config.getfloat('position_endstop')
else:
self.position_endstop = config.getfloat(