Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

config: Remove URLs to github repository 

Update URLs to documentation in the github repository to use the
klipper3d.org website.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-09-23 19:45:22 -04:00
parent 44e2c630b3
commit c2d3a1689e
4 changed files with 6 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
config/kit-voron2-250mm.cfg
View File

@ -13,9 +13,6 @@
# See docs/Config_Reference.md for a description of parameters.
# AND PLEASE READ THROUGH THE KLIPPER DOCUMENTATION FIRST!
# https://github.com/KevinOConnor/klipper/tree/master/docs
# *** THINGS TO CHANGE/CHECK: ***
# Arduino paths [mcu] section
# Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file

4
config/printer-creality-ender3max-2021.cfg
View File

@ -98,7 +98,7 @@ step_pin: PB4
dir_pin: PB3
enable_pin: !PC3
microsteps: 16
rotation_distance: 31.901 # Calibrate - see https://github.com/KevinOConnor/klipper/blob/master/docs/Rotation_Distance.md
rotation_distance: 31.901 # Calibrate - see https://www.klipper3d.org/Rotation_Distance.html
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PA1
@ -110,7 +110,7 @@ pid_Ki: 1.063
pid_Kd: 108.982
min_temp: 0
max_temp: 250
pressure_advance: 0.0 # Calibrate - see https://github.com/KevinOConnor/klipper/blob/master/docs/Pressure_Advance.md
pressure_advance: 0.0 # Calibrate - see https://www.klipper3d.org/Pressure_Advance.html
[heater_bed]

2
config/printer-hiprecy-leo-2019.cfg
View File

@ -49,7 +49,7 @@ step_pin: PA4
dir_pin: PA6
enable_pin: !PA2
microsteps: 16
rotation_distance: 23.133 ### Based on default 415 steps/mm. See https://github.com/KevinOConnor/klipper/blob/master/docs/Rotation_Distance.md for fine tuning
rotation_distance: 23.133 ### Based on default 415 steps/mm. See https://www.klipper3d.org/Rotation_Distance.html for fine tuning
gear_ratio: 50:17
nozzle_diameter: 0.400
filament_diameter: 1.750

6
config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
View File

@ -18,7 +18,7 @@
# guidelines:
#
# - Locate the USB serial port for your printer in /dev/serial/by-id/ format.
# See https://github.com/KevinOConnor/klipper/blob/master/docs/FAQ.md#wheres-my-serial-port
# See https://www.klipper3d.org/FAQ.html#wheres-my-serial-port
# It will be something like:
# /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_ABCD1234-if00-port0
#
@ -27,7 +27,7 @@
# - At this point, "make flash FLASH_DEVICE=..." should successfully
# flash your printer board. Use the /dev/serial/by-id/ format for
# FLASH_DEVICE to ensure consistent results.
# See https://github.com/KevinOConnor/klipper/blob/master/docs/FAQ.md#the-make-flash-command-doesnt-work
# See https://www.klipper3d.org/FAQ.html#the-make-flash-command-doesnt-work
# if you have problems.
#
# - Copy this sample file you are currently reading to ~/printer.cfg,
@ -83,7 +83,7 @@
# You should then see a status screen appear on the printer's LCD.
#
# - Be sure to follow these instructions before attempting any prints:
# https://github.com/KevinOConnor/klipper/blob/master/docs/Config_checks.md
# https://www.klipper3d.org/Config_checks.html
[stepper_x]
step_pin: PD7