From c11e4b74c224ac808f292d408b681e3d9bd6bfbe Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Tue, 5 Nov 2019 10:50:19 -0500 Subject: [PATCH] config: Minor updates to printer-creality-cr20-pro-2019.cfg Don't specify a default for pressure_advance. Don't specify values that are already at their default. Add to printers.test test case. Signed-off-by: Kevin O'Connor --- config/printer-creality-cr20-pro-2019.cfg | 8 -------- test/klippy/printers.test | 1 + 2 files changed, 1 insertion(+), 8 deletions(-) diff --git a/config/printer-creality-cr20-pro-2019.cfg b/config/printer-creality-cr20-pro-2019.cfg index 6fc86d4f..0aed3f88 100644 --- a/config/printer-creality-cr20-pro-2019.cfg +++ b/config/printer-creality-cr20-pro-2019.cfg @@ -12,8 +12,6 @@ endstop_pin: ^PE5 position_endstop: 0 position_max: 235 homing_speed: 100 -second_homing_speed: 50 -homing_retract_dist: 5 [stepper_y] step_pin: PF6 @@ -24,8 +22,6 @@ endstop_pin: ^PJ1 position_endstop: 0 position_max: 235 homing_speed: 100 -second_homing_speed: 50 -homing_retract_dist: 5 [stepper_z] step_pin: PL3 @@ -45,7 +41,6 @@ enable_pin: !PA2 step_distance: .010526 nozzle_diameter: 0.400 filament_diameter: 1.750 -pressure_advance: 0.9 # please calibrate! heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F sensor_pin: PK5 @@ -62,7 +57,6 @@ control_pin: PB5 z_offset: 3.60 x_offset: 46 y_offset: 9 -pin_move_time: 0.15 speed: 3.0 samples: 1 @@ -78,8 +72,6 @@ horizontal_move_z: 8 min_point: 60,30 max_point: 235,220 probe_count: 3,3 -fade_start: 1.0 -fade_end: 0 # disable fading [heater_bed] heater_pin: PH5 diff --git a/test/klippy/printers.test b/test/klippy/printers.test index 57c91ec3..78a8dd47 100644 --- a/test/klippy/printers.test +++ b/test/klippy/printers.test @@ -25,6 +25,7 @@ CONFIG ../../config/printer-anycubic-kossel-2016.cfg CONFIG ../../config/printer-anycubic-kossel-plus-2017.cfg CONFIG ../../config/printer-creality-cr10s-2017.cfg CONFIG ../../config/printer-creality-cr20-2018.cfg +CONFIG ../../config/printer-creality-cr20-pro-2019.cfg CONFIG ../../config/printer-lulzbot-taz6-2017.cfg CONFIG ../../config/printer-lulzbot-taz6-dual-v3-2017.cfg CONFIG ../../config/printer-makergear-m2-2012.cfg