From bbb06a014b709ca1566124938f438d3e5fe019bc Mon Sep 17 00:00:00 2001 From: th33xitus Date: Wed, 18 May 2022 10:32:21 +0200 Subject: [PATCH] docs: fix links to Config_Reference.md Signed-off-by: Dominik Willner --- docs/G-Codes.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 26b03e8c..5e562da4 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -335,8 +335,8 @@ changes the active hotend. [ADVANCE=] [SMOOTH_TIME=]`: Set pressure advance parameters of an extruder stepper (as defined in an -[extruder](Config_Reference#extruder) or -[extruder_stepper](Config_Reference#extruder_stepper) config section). +[extruder](Config_Reference.md#extruder) or +[extruder_stepper](Config_Reference.md#extruder_stepper) config section). If EXTRUDER is not specified, it defaults to the stepper defined in the active hotend. @@ -344,8 +344,8 @@ the active hotend. `SET_EXTRUDER_ROTATION_DISTANCE EXTRUDER= [DISTANCE=]`: Set a new value for the provided extruder stepper's "rotation distance" (as defined in an -[extruder](Config_Reference#extruder) or -[extruder_stepper](Config_Reference#extruder_stepper) config section). +[extruder](Config_Reference.md#extruder) or +[extruder_stepper](Config_Reference.md#extruder_stepper) config section). If the rotation distance is a negative number then the stepper motion will be inverted (relative to the stepper direction specified in the config file). Changed settings are not retained on Klipper reset. Use @@ -357,10 +357,10 @@ current rotation distance. #### SYNC_EXTRUDER_MOTION `SYNC_EXTRUDER_MOTION EXTRUDER= MOTION_QUEUE=`: This command will cause the stepper specified by EXTRUDER (as defined in an -[extruder](Config_Reference#extruder) or -[extruder_stepper](Config_Reference#extruder_stepper) config section) +[extruder](Config_Reference.md#extruder) or +[extruder_stepper](Config_Reference.md#extruder_stepper) config section) to become synchronized to the movement of an extruder specified by -MOTION_QUEUE (as defined in an [extruder](Config_Reference#extruder) +MOTION_QUEUE (as defined in an [extruder](Config_Reference.md#extruder) config section). If MOTION_QUEUE is an empty string then the stepper will be desynchronized from all extruder movement. @@ -436,7 +436,7 @@ retraction and displays them on the terminal. The force_move module is automatically loaded, however some commands require setting `enable_force_move` in the -[printer config](Config_Reference#force_move). +[printer config](Config_Reference.md#force_move). #### STEPPER_BUZZ `STEPPER_BUZZ STEPPER=`: Move the given stepper forward