Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Minor updates to wording of some documents 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2016-12-01 10:21:36 -05:00
parent d2ecc9d80c
commit babc9e7a1e
3 changed files with 15 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Firmware_Commands.md
View File

@ -46,12 +46,12 @@ Common startup commands:
* set_pwm_out pin=%u cycle_ticks=%u value=%c : This command will
immediately configure the given pin to use hardware based
pulse-width-modulation (PWM) with the given number of
cycle_ticks. The "cycle_ticks" is the amount of time (in MCU clock
ticks) in a complete power on and power off cycle. A cycle_ticks
value of 1 can be used to request the fastest possible cycle
time. The specified "value" is between 0 and 255 with 0 indicating a
full off state and 255 indicating a full on state. This command may
be useful for enabling CPU and nozzle cooling fans.
cycle_ticks. The "cycle_ticks" is the number of MCU clock ticks each
power on and power off cycle should last. A cycle_ticks value of 1
can be used to request the fastest possible cycle time. The "value"
parameter is between 0 and 255 with 0 indicating a full off state
and 255 indicating a full on state. This command may be useful for
enabling CPU and nozzle cooling fans.
* send_spi_message pin=%u msg=%*s : This command can be used to
transmit messages to a serial-peripheral-interface (SPI) component

5
docs/Installation.md
View File

@ -1,8 +1,7 @@
Klipper is currently in an experimental state. These instructions
assume the software will run on a Raspberry Pi computer in conjunction
with OctoPrint. Klipper supports only Atmel ATmega based
micro-controllers and Arduino Due (Atmel SAM3x8e ARM
micro-controllers) printers at this time.
with OctoPrint. Klipper supports Atmel ATmega based micro-controllers
and Arduino Due (Atmel SAM3x8e ARM micro-controllers) printers.
It is recommended that a Raspberry Pi 2 or Raspberry Pi 3 computer be
used as the host. The software will run on a first generation

14
docs/Protocol.md
View File

@ -28,19 +28,19 @@ DECL_COMMAND(command_set_digital_out, "set_digital_out pin=%u value=%c");
The above declares a command named "set_digital_out". This allows the
host to "invoke" this command which would cause the
command_set_digital_out() C function will be executed in the
command_set_digital_out() C function to be executed in the
firmware. The above also indicates that the command takes two integer
parameters. When the command_set_digital_out() C code is executed, it
will be passed an array containing these two integers - the first
corresponding to the 'pin' and the second corresponding to the
'value'.
In general, the parameters are described with printf() style
parameters (eg, "%u"). In the above example, "value=" is a parameter
name and "%c" indicates the parameter is an integer. The parameter
name is used as documentation. In this example, the "%c" is used as
documentation to indicate the expected integer is 1 byte in size (the
declared integer size does not impact the parsing or encoding).
In general, the parameters are described with printf() style syntax
(eg, "%u"). In the above example, "value=" is a parameter name and
"%c" indicates the parameter is an integer. The parameter name is used
as documentation. In this example, the "%c" is used as documentation
to indicate the expected integer is 1 byte in size (the declared
integer size does not impact the parsing or encoding).
At firmware compile time, the build will collect all commands declared
with DECL_COMMAND(), determine their parameters, and arrange for them