diff --git a/klippy/extras/t5uid1/dgus_reloaded/routines.cfg b/klippy/extras/t5uid1/dgus_reloaded/routines.cfg
index d3f0e9ca..b88c5ede 100644
--- a/klippy/extras/t5uid1/dgus_reloaded/routines.cfg
+++ b/klippy/extras/t5uid1/dgus_reloaded/routines.cfg
@@ -109,8 +109,8 @@ script:
     { abort_page_switch() }
   {% elif printer.toolhead.homed_axes == "xyz" %}
     {% set t5uid1 = printer.t5uid1 %}
-    {% set x = (t5uid1.limits.x_min + t5uid1.limits.x_max) / 2 %}
-    {% set y = (t5uid1.limits.y_min + t5uid1.limits.y_max) / 2 %}
+    {% set x = (t5uid1.limits.x_min + t5uid1.limits.x_max) / 2.0 %}
+    {% set y = (t5uid1.limits.y_min + t5uid1.limits.y_max) / 2.0 %}
     {% if printer.gcode_move.gcode_position.z < 10 %}
       G1 Z10 F600
     {% endif %}
@@ -136,8 +136,8 @@ script:
     { abort_page_switch() }
   {% elif printer.toolhead.homed_axes == "xyz" %}
     {% set t5uid1 = printer.t5uid1 %}
-    {% set x = (t5uid1.limits.x_min + t5uid1.limits.x_max) / 2 %}
-    {% set y = (t5uid1.limits.y_min + t5uid1.limits.y_max) / 2 %}
+    {% set x = (t5uid1.limits.x_min + t5uid1.limits.x_max) / 2.0 %}
+    {% set y = (t5uid1.limits.y_min + t5uid1.limits.y_max) / 2.0 %}
     {% if printer.gcode_move.gcode_position.z < 5 %}
       G1 Z5 F600
     {% endif %}
diff --git a/klippy/extras/t5uid1/dgus_reloaded/vars_in.cfg b/klippy/extras/t5uid1/dgus_reloaded/vars_in.cfg
index 35067bd1..8dc88a37 100644
--- a/klippy/extras/t5uid1/dgus_reloaded/vars_in.cfg
+++ b/klippy/extras/t5uid1/dgus_reloaded/vars_in.cfg
@@ -102,7 +102,7 @@ script:
   {% if "z" not in printer.toolhead.homed_axes %}
     {% do set_message("Homing required") %}
   {% else %}
-    {% set offset = data|float / 10 ** 2 %}
+    {% set offset = data|float / 100 %}
     SET_GCODE_OFFSET Z={offset} MOVE=1
     {% do start_routine("trigger_full_update") %}
   {% endif %}
@@ -236,7 +236,7 @@ script:
   {% if "z" not in printer.toolhead.homed_axes %}
     {% do set_message("Homing required") %}
   {% else %}
-    {% set offset = data|float / 10 ** 2 %}
+    {% set offset = data|float / 100 %}
     SET_GCODE_OFFSET Z={offset} MOVE=1
     {% do start_routine("trigger_full_update") %}
   {% endif %}
@@ -289,8 +289,8 @@ script:
     {% set hop = 5 %}
     {% set t5uid1 = printer.t5uid1 %}
     {% if data == 1 %}
-      {% set x = (t5uid1.limits.x_max - t5uid1.limits.x_min + t5uid1.limits.x_min_inset - t5uid1.limits.x_max_inset) / 2 %}
-      {% set y = (t5uid1.limits.y_max - t5uid1.limits.y_min + t5uid1.limits.y_min_inset - t5uid1.limits.y_max_inset) / 2 %}
+      {% set x = (t5uid1.limits.x_max - t5uid1.limits.x_min + t5uid1.limits.x_min_inset - t5uid1.limits.x_max_inset) / 2.0 %}
+      {% set y = (t5uid1.limits.y_max - t5uid1.limits.y_min + t5uid1.limits.y_min_inset - t5uid1.limits.y_max_inset) / 2.0 %}
     {% elif data == 2 %}
       {% set x = t5uid1.limits.x_min + t5uid1.limits.x_min_inset %}
       {% set y = t5uid1.limits.y_min + t5uid1.limits.y_min_inset %}
@@ -442,7 +442,7 @@ script:
     {% do set_message("Homing required") %}
   {% else %}
     {% set t5uid1 = printer.t5uid1 %}
-    {% set pos = data|float / 10 ** 1 %}
+    {% set pos = data|float / 10 %}
     {% if pos < t5uid1.limits.x_min %}
       {% set pos = t5uid1.limits.x_min %}
     {% elif pos > t5uid1.limits.x_max %}
@@ -465,7 +465,7 @@ script:
     {% do set_message("Homing required") %}
   {% else %}
     {% set t5uid1 = printer.t5uid1 %}
-    {% set pos = data|float / 10 ** 1 %}
+    {% set pos = data|float / 10 %}
     {% if pos < t5uid1.limits.y_min %}
       {% set pos = t5uid1.limits.y_min %}
     {% elif pos > t5uid1.limits.y_max %}
@@ -488,7 +488,7 @@ script:
     {% do set_message("Homing required") %}
   {% else %}
     {% set t5uid1 = printer.t5uid1 %}
-    {% set pos = data|float / 10 ** 1 %}
+    {% set pos = data|float / 10 %}
     {% if pos < t5uid1.limits.z_min %}
       {% set pos = t5uid1.limits.z_min %}
     {% elif pos > t5uid1.limits.z_max %}
diff --git a/klippy/extras/t5uid1/t5uid1.py b/klippy/extras/t5uid1/t5uid1.py
index 87ae04cc..afc73410 100644
--- a/klippy/extras/t5uid1/t5uid1.py
+++ b/klippy/extras/t5uid1/t5uid1.py
@@ -44,7 +44,7 @@ CONTROL_TYPES = {
 def map_value_range(x, in_min, in_max, out_min, out_max):
     return int(round((x - in_min)
                      * (out_max - out_min)
-                     / (in_max - in_min)
+                     // (in_max - in_min)
                      + out_min))
 
 def get_duration(seconds):
@@ -52,9 +52,9 @@ def get_duration(seconds):
         seconds = int(seconds)
     if seconds < 0:
         seconds = 0
-    minutes = seconds / 60
-    hours = minutes / 60
-    days = hours / 24
+    minutes = seconds // 60
+    hours = minutes // 60
+    days = hours // 24
     days %= 365
     hours %= 24
     minutes %= 60
@@ -830,10 +830,10 @@ class T5UID1:
             and self._z_max < z_max
             and self._z_max > z_min):
             z_max = self._z_max
-        x_min_inset = min(self._x_min_inset, (x_max - x_min) / 2)
-        x_max_inset = min(self._x_max_inset, (x_max - x_min) / 2)
-        y_min_inset = min(self._y_min_inset, (y_max - y_min) / 2)
-        y_max_inset = min(self._y_max_inset, (y_max - y_min) / 2)
+        x_min_inset = min(self._x_min_inset, (x_max - x_min) / 2.0)
+        x_max_inset = min(self._x_max_inset, (x_max - x_min) / 2.0)
+        y_min_inset = min(self._y_min_inset, (y_max - y_min) / 2.0)
+        y_max_inset = min(self._y_max_inset, (y_max - y_min) / 2.0)
         return {
             'x_min': x_min,
             'x_max': x_max,