config: added ender3 with robin e3d 1.1 (#4252)

Signed-off-by: Łukasz Piątkowski <piontec@gmail.com>
This commit is contained in:
Lukasz Piatkowski 2021-08-17 17:49:52 +02:00 committed by GitHub
parent e3cf8fc819
commit a90c8d7bc8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 25 additions and 2 deletions

View File

@ -13,6 +13,8 @@
# MKS Robin E3 has onboard TMC2209. This config can also be used for
# MKS Robin E3D if equipped with TMC2209 stepper drivers.
# Please note pin name change for stepper Z for v1.1 of the boards.
# See docs/Config_Reference.md for a description of parameters.
[stepper_x]
@ -39,7 +41,7 @@ homing_speed: 50
[stepper_z]
step_pin: PB7 # PC14 if using board v1.1
dir_pin: !PB6 #PC15 if using board v1.1
dir_pin: !PB6 # !PC15 if using board v1.1
enable_pin: !PB8
microsteps: 16
rotation_distance: 8
@ -102,6 +104,10 @@ pin: PA8
#control_pin: PA3
#...
#[filament_switch_sensor my_sensor]
#switch_pin: PB10
#...
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
restart_method: command
@ -122,5 +128,22 @@ aliases:
# EXP2 header
EXP2_1=PB14, EXP2_3=PB11, EXP2_5=PB0, EXP2_7=PC10, EXP2_9=<GND>,
EXP2_2=PB13, EXP2_4=PA15, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
# CR_EXP3 header - additional header dedicated to Creality Ender 3/5 stock screens
CR_EXP3_10=<5V>, CR_EXP3_8=PA4, CR_EXP3_6=PA6, CR_EXP3_4=<RST>, CR_EXP3_2=PC3,
CR_EXP3_9=<GND>, CR_EXP3_7=PA5, CR_EXP3_5=PB0, CR_EXP3_3=PB11, CR_EXP3_1=PC1
# If you're using this board to replace stock Creality board, connect display to EXP3
# and use this display config
#[display]
#lcd_type: st7920
#sid_pin: CR_EXP3_8
#cs_pin: CR_EXP3_7
#sclk_pin: CR_EXP3_6
#encoder_pins: ^CR_EXP3_5, ^CR_EXP3_3
#click_pin: ^!CR_EXP3_2
#
#[output_pin beeper]
## pin: EXP1_9
#pin: CR_EXP3_1
# See the sample-lcd.cfg file for definitions of common LCD displays.