docs: Rename Documents

Signed-off-by: Yifei Ding <yifeiding@protonmail.com>

docs/Config_Changes.md

@@ -308,7 +308,7 @@ that command.
 
 20190628: All configuration options have been removed from the
 [skew_correction] section.  Configuration for skew_correction
-is now done via the SET_SKEW gcode.  See skew_correction.md
+is now done via the SET_SKEW gcode.  See [Skew Correction](Skew_Correction.md)
 for recommended usage.
 
 20190607: The "variable_X" parameters of gcode_macro (along with the

docs/Config_Reference.md

@@ -1112,8 +1112,8 @@ Printer Skew Correction. It is possible to use software to correct
 printer skew across 3 planes, xy, xz, yz. This is done by printing a
 calibration model along a plane and measuring three lengths. Due to
 the nature of skew correction these lengths are set via gcode. See
-[skew correction](skew_correction.md) and
+[Skew Correction](Skew_Correction.md) and
-[command reference](G-Codes.md#skew-correction) for details.
+[Command Reference](G-Codes.md#skew-correction) for details.
 
 ```
 [skew_correction]
@@ -3727,7 +3727,7 @@ TSLl401CL Based Filament Width Sensor. See the
 ### [hall_filament_width_sensor]
 
 Hall filament width sensor (see
-[Hall Filament Width Sensor](HallFilamentWidthSensor.md)).
+[Hall Filament Width Sensor](Hall_Filament_Width_Sensor.md)).
 
 ```
 [hall_filament_width_sensor]
@@ -3870,7 +3870,7 @@ vssa_pin:
 
 ### [replicape]
 
-Replicape support - see the [beaglebone guide](beaglebone.md) and the
+Replicape support - see the [beaglebone guide](Beaglebone.md) and the
 [generic-replicape.cfg](../config/generic-replicape.cfg) file for an
 example.
 

docs/FAQ.md

@@ -136,7 +136,7 @@ feature when printing (see
 [config reference](Config_Reference.md#virtual_sdcard) for details).
 
 For running on the Beaglebone, see the
-[Beaglebone specific installation instructions](beaglebone.md).
+[Beaglebone specific installation instructions](Beaglebone.md).
 
 Klipper has been run on other machines. The Klipper host software only
 requires Python running on a Linux (or similar) computer. However, if

docs/G-Codes.md

@@ -663,7 +663,7 @@ retraction required.
 
 The following commands are available when the
 [skew_correction config section](Config_Reference.md#skew_correction)
-is enabled (also see the [skew correction guide](skew_correction.md)):
+is enabled (also see the [Skew Correction](Skew_Correction.md) guide):
 - `SET_SKEW [XY=<ac_length,bd_length,ad_length>] [XZ=<ac,bd,ad>]
   [YZ=<ac,bd,ad>] [CLEAR=<0|1>]`: Configures the [skew_correction]
   module with measurements (in mm) taken from a calibration print.
@@ -678,7 +678,7 @@ is enabled (also see the [skew correction guide](skew_correction.md)):
   degrees) based on a measured print. This can be useful for
   determining the printer's current skew after correction has been
   applied. It may also be useful before correction is applied to
-  determine if skew correction is necessary. See skew_correction.md
+  determine if skew correction is necessary. See [Skew Correction](Skew_Correction.md)
   for details on skew calibration objects and measurements.
 - `SKEW_PROFILE [LOAD=<name>] [SAVE=<name>] [REMOVE=<name>]`: Profile
   management for skew_correction. LOAD will restore skew state from

docs/Installation.md

@@ -9,7 +9,7 @@ for other machines).
 Klipper currently supports a number of Atmel ATmega based
 micro-controllers,
 [ARM based micro-controllers](Features.md#step-benchmarks), and
-[Beaglebone PRU](beaglebone.md) based printers.
+[Beaglebone PRU](Beaglebone.md) based printers.
 
 ## Prepping an OS image
 

docs/Overview.md

@@ -50,7 +50,7 @@ communication with the Klipper developers.
   with Klipper.
 - [Multi-MCU Homing](Multi_MCU_Homing.md): Homing and probing using multiple micro-controllers.
 - [Slicers](Slicers.md): Configure "slicer" software for Klipper.
-- [Skew correction](skew_correction.md): Adjustments for axes not
+- [Skew correction](Skew_Correction.md): Adjustments for axes not
   perfectly square.
 - [PWM tools](Using_PWM_Tools.md): Guide on how to use PWM controlled
   tools such as lasers or spindles.
@@ -85,10 +85,10 @@ communication with the Klipper developers.
   copying a binary to an sdcard in the micro-controller.
 - [Raspberry Pi as Micro-controller](RPi_microcontroller.md): Details
   for controlling devices wired to the GPIO pins of a Raspberry Pi.
-- [Beaglebone](beaglebone.md): Details for running Klipper on the
+- [Beaglebone](Beaglebone.md): Details for running Klipper on the
   Beaglebone PRU.
 - [Bootloaders](Bootloaders.md): Developer information on
   micro-controller flashing.
 - [CAN bus](CANBUS.md): Information on using CAN bus with Klipper.
 - [TSL1401CL filament width sensor](TSL1401CL_Filament_Width_Sensor.md)
-- [Hall filament width sensor](HallFilamentWidthSensor.md)
+- [Hall filament width sensor](Hall_Filament_Width_Sensor.md)

docs/_klipper3d/mkdocs.yml

@@ -101,7 +101,7 @@ nav:
     - TMC_Drivers.md
     - Multi_MCU_Homing.md
     - Slicers.md
-    - skew_correction.md
+    - Skew_Correction.md
     - Using_PWM_Tools.md
   - Developer Documentation:
     - Code_Overview.md
@@ -118,8 +118,8 @@ nav:
     - Example_Configs.md
     - SDCard_Updates.md
     - RPi_microcontroller.md
-    - beaglebone.md
+    - Beaglebone.md
     - Bootloaders.md
     - CANBUS.md
     - TSL1401CL_Filament_Width_Sensor.md
-    - HallFilamentWidthSensor.md
+    - Hall_Filament_Width_Sensor.md