diff --git a/config/example-extras.cfg b/config/example-extras.cfg
index 1ff7c10b..eee10fd5 100644
--- a/config/example-extras.cfg
+++ b/config/example-extras.cfg
@@ -874,6 +874,19 @@
 #voltage_offset: 0
 #   The ADC voltage offset (in Volts). The default is 0.
 
+# Directly connected PT1000 sensor. The following parameters are
+# available in heater sections that use one of these sensors.
+#[extruder]
+# See the "extruder" section in example.cfg for a description of
+# heater parameters. The parameters below describe sensor parameters.
+#sensor_type: PT1000
+#sensor_pin:
+#   Analog input pin connected to the sensor. This parameter must be
+#   provided.
+#pullup_resistor: 4700
+#   The resistance (in ohms) of the pullup attached to the sensor. The
+#   default is 4700 ohms.
+
 # Custom thermistors (one may define any number of sections with a
 # "thermistor" prefix). A custom thermistor may be used in the
 # sensor_type field of a heater config section. (For example, if one
diff --git a/klippy/extras/adc_temperature.py b/klippy/extras/adc_temperature.py
index 7a4cc8d2..0ec13776 100644
--- a/klippy/extras/adc_temperature.py
+++ b/klippy/extras/adc_temperature.py
@@ -132,7 +132,7 @@ class LinearResistance:
     def __init__(self, config, samples):
         self.pullup = config.getfloat('pullup_resistor', 4700., above=0.)
         try:
-            self.li = LinearInterpolate(samples)
+            self.li = LinearInterpolate([(r, t) for t, r in samples])
         except ValueError as e:
             raise config.error("adc_temperature %s in heater %s" % (
                 str(e), config.get_name()))
@@ -156,7 +156,7 @@ class CustomLinearResistance:
             if t is None:
                 break
             r = config.getfloat("resistance%d" % (i,))
-            self.samples.append((r, t))
+            self.samples.append((t, r))
     def create(self, config):
         lr = LinearResistance(config, self.samples)
         return PrinterADCtoTemperature(config, lr)
@@ -266,6 +266,11 @@ PT100 = [
     (1000, 4.48), (1100, 4.73)
 ]
 
+PT1000 = [
+    (0., 1000.), (100., 1385.1), (200., 1758.6), (300., 2120.5),
+    (400., 2470.9), (500., 2809.8),
+]
+
 def load_config(config):
     # Register default sensors
     pheater = config.get_printer().lookup_object("heater")
@@ -278,6 +283,11 @@ def load_config(config):
         func = (lambda config, params=params:
                 PrinterADCtoTemperature(config, LinearVoltage(config, params)))
         pheater.add_sensor_factory(sensor_type, func)
+    for sensor_type, params in [("PT1000", PT1000)]:
+        func = (lambda config, params=params:
+                PrinterADCtoTemperature(config,
+                                        LinearResistance(config, params)))
+        pheater.add_sensor_factory(sensor_type, func)
 
 def load_config_prefix(config):
     if config.get("resistance1", None) is None:
diff --git a/test/klippy/temperature.cfg b/test/klippy/temperature.cfg
index 83e5efa4..36570c3e 100644
--- a/test/klippy/temperature.cfg
+++ b/test/klippy/temperature.cfg
@@ -129,6 +129,10 @@ resistance3: 3000
 sensor_type: my_custom_resistance_adc
 sensor_pin: analog5
 
+[temperature_sensor test_PT1000]
+sensor_type: PT1000
+sensor_pin: analog9
+
 [controller_fan test_controller_fan]
 pin: ar17