config: Update example-extras.cfg to point to Command_Templates.md

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-06-07 11:57:54 -04:00
parent f1c6d04376
commit 9d33ef4061
1 changed files with 32 additions and 33 deletions

View File

@ -40,14 +40,14 @@
# The calculation method when sampling more than once - either
# "median" or "average". The default is average.
#activate_gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute prior to each probe attempt. This may be
# A list of G-Code commands to execute prior to each probe attempt.
# See docs/Command_Templates.md for G-Code format. This may be
# useful if the probe needs to be activated in some way. Do not
# issue any commands here that move the toolhead (eg, G1). The
# default is to not run any special G-Code commands on activation.
#deactivate_gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute after each probe attempt completes. Do not
# A list of G-Code commands to execute after each probe attempt
# completes. See docs/Command_Templates.md for G-Code format. Do not
# issue any commands here that move the toolhead. The default is to
# not run any special G-Code commands on deactivation.
@ -369,18 +369,18 @@
# should specify "shared_heater: extruder3". The default is to not
# reuse an existing heater.
#deactivate_gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute on a G-Code tool change command (eg, "T1")
# that deactivates this extruder and activates some other
# extruder. It only makes sense to define this section on
# A list of G-Code commands to execute on a G-Code tool change
# command (eg, "T1") that deactivates this extruder and activates
# some other extruder. See docs/Command_Templates.md for G-Code
# format. It only makes sense to define this section on
# multi-extruder printers. The default is to not run any special
# G-Code commands on deactivation.
#activate_gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute on a G-Code tool change command (eg, "T0")
# that activates this extruder. It only makes sense to define this
# section on multi-extruder printers. The default is to not run any
# special G-Code commands on activation.
# A list of G-Code commands to execute on a G-Code tool change
# command (eg, "T0") that activates this extruder. See
# docs/Command_Templates.md for G-Code format. It only makes sense
# to define this section on multi-extruder printers. The default is
# to not run any special G-Code commands on activation.
# Support for cartesian printers with dual carriages on a single
@ -445,8 +445,8 @@
# explicit idle_timeout config section to change the default settings.
#[idle_timeout]
#gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute on an idle timeout. The default is to run
# A list of G-Code commands to execute on an idle timeout. See
# docs/Command_Templates.md for G-Code format. The default is to run
# "TURN_OFF_HEATERS" and "M84".
#timeout: 600
# Idle time (in seconds) to wait before running the above G-Code
@ -1202,12 +1202,12 @@
# home the machine.
#[homing_override]
#gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute in place of G28 commands found in the normal
# g-code input. If a G28 is contained in this list of commands then
# it will invoke the normal homing procedure for the printer. The
# commands listed here must home all axes. This parameter must be
# provided.
# A list of G-Code commands to execute in place of G28 commands
# found in the normal g-code input. See docs/Command_Templates.md
# for G-Code format. If a G28 is contained in this list of commands
# then it will invoke the normal homing procedure for the printer.
# The commands listed here must home all axes. This parameter must
# be provided.
#axes: xyz
# The axes to override. For example, if this is set to "z" then the
# override script will only be run when the z axis is homed (eg, via
@ -1441,13 +1441,9 @@
# "gcode_macro" prefix).
#[gcode_macro my_cmd]
#gcode:
# A list of G-Code commands (one per line; subsequent lines
# indented) to execute in place of "my_cmd". This parameter is
# evaluated using Python "string format syntax" with the command
# parameters as named arguments. For example, if one were to define
# a macro MY_DELAY with gcode "G4 P{DELAY}" then the command
# "MY_DELAY DELAY=100" would evaluate to "G4 P100". This parameter
# must be provided.
# A list of G-Code commands to execute in place of "my_cmd". See
# docs/Command_Templates.md for G-Code format. This parameter must
# be provided.
#default_parameter_<parameter>:
# One may define any number of options with a "default_parameter_"
# prefix. Use this to define default values for g-code parameters.
@ -1537,12 +1533,15 @@
# runout_gcode is omitted then runout detection is disabled. Default
# is True.
#runout_gcode:
# The gcode to run after a filament runout is detected. If
# pause_on_runout is set to True this gcode will run after the PAUSE
# is complete. The default is not to run any gcode commands.
# A list of G-Code commands to execute after a filament runout is
# detected. See docs/Command_Templates.md for G-Code format. If
# pause_on_runout is set to True this G-Code will run after the
# PAUSE is complete. The default is not to run any G-Code commands.
#insert_gcode:
# The gcode to run after a filament insert is detected. The default
# is not to run any gcode commands, which disables insert detection.
# A list of G-Code commands to execute after a filament insert is
# detected. See docs/Command_Templates.md for G-Code format. The
# default is not to run any G-Code commands, which disables insert
# detection.
#event_delay: 3.0
# The minimum amount of time in seconds to delay between events.
# Events triggered during this time period will be silently