Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

config: Remove tmc interpolate setting from example configs 

There is no reason to explicitly set the interpolate flag to true in
the example configs as that is already the default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-11-28 20:46:37 -05:00
parent 37a117e64f
commit 92c41b8827
3 changed files with 0 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
config/generic-bigtreetech-gtr.cfg
View File

@ -218,7 +218,6 @@ max_z_accel: 5
#[tmc5160 stepper_x]
#cs_pin: PC14
#sense_resistor: 0.075
#interpolate: True
#run_current: 1
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
@ -228,7 +227,6 @@ max_z_accel: 5
#[tmc5160 stepper_y]
#cs_pin: PE1
#sense_resistor: 0.075
#interpolate: True
#run_current: 1
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
@ -238,7 +236,6 @@ max_z_accel: 5
#[tmc5160 stepper_z]
#cs_pin: PB5
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.4
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
@ -248,7 +245,6 @@ max_z_accel: 5
#[tmc5160 extruder]
#cs_pin: PG10
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.5
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
@ -258,7 +254,6 @@ max_z_accel: 5
#[tmc5160 extruder1]
#cs_pin: PD4
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.800
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
@ -268,7 +263,6 @@ max_z_accel: 5
#[tmc5160 extruder2]
#cs_pin: PC12
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.800
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15

10
config/generic-duet2-duex.cfg
View File

@ -96,7 +96,6 @@ position_max: 250
[tmc2660 stepper_x]
cs_pin: PD14 # X_SPI_EN Required for communication
spi_bus: usart1 # All TMC2660 drivers are connected to USART1
interpolate: True # 1/16 micro-steps interpolated to 1/256
run_current: 1.000
sense_resistor: 0.051
idle_current_percent: 20
@ -114,7 +113,6 @@ position_max: 210
[tmc2660 stepper_y]
cs_pin: PC9
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
idle_current_percent: 20
@ -132,7 +130,6 @@ position_max: 200
[tmc2660 stepper_z]
cs_pin: PC10
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -147,7 +144,6 @@ rotation_distance: 8
[tmc2660 stepper_z1]
cs_pin: PD25
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -162,7 +158,6 @@ rotation_distance: 8
[tmc2660 stepper_z2]
cs_pin: PD26
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -177,7 +172,6 @@ rotation_distance: 8
[tmc2660 stepper_z3]
cs_pin: PB14
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -203,7 +197,6 @@ max_temp: 250
[tmc2660 extruder]
cs_pin: PC17
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -229,7 +222,6 @@ max_temp: 250
[tmc2660 extruder1]
cs_pin: PC25
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -255,7 +247,6 @@ max_temp: 250
[tmc2660 extruder2]
cs_pin: PD23
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051
@ -281,7 +272,6 @@ max_temp: 250
[tmc2660 extruder3]
cs_pin: PD24
spi_bus: usart1
interpolate: True
run_current: 1.000
sense_resistor: 0.051

3
config/sample-mmu2s-diy.cfg
View File

@ -36,7 +36,6 @@ endstop_pin: ^mmboard:PC2 # PINDA X+
[tmc2208 manual_stepper gear_stepper]
uart_pin: mmboard:PC14
run_current: 1.000
interpolate: True
sense_resistor: 0.110
# Y : MMU2S idler with the 5 ball bearings
@ -52,7 +51,6 @@ accel: 80
[tmc2209 manual_stepper idler_stepper]
uart_pin: mmboard:PB7
run_current: 0.800
interpolate: True
sense_resistor: 0.110
stealthchop_threshold: 999999
@ -71,7 +69,6 @@ endstop_pin: !mmboard:PC0 # switch endstop on the left Z-
[tmc2209 manual_stepper selector_stepper]
uart_pin: mmboard:PC12
run_current: 1.000
interpolate: True
sense_resistor: 0.110
stealthchop_threshold: 999999