From 8ce042bf04aca923460d7ed37fa938e11378f917 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 24 Jul 2017 13:17:18 -0400 Subject: [PATCH] config: Add additional pin definitions to ramps and rambo configs Signed-off-by: Kevin O'Connor --- config/generic-rambo.cfg | 18 +++++++++++++++++- config/generic-ramps.cfg | 13 ++++++++++++- 2 files changed, 29 insertions(+), 2 deletions(-) diff --git a/config/generic-rambo.cfg b/config/generic-rambo.cfg index 2bd6a74b..886394e6 100644 --- a/config/generic-rambo.cfg +++ b/config/generic-rambo.cfg @@ -9,6 +9,7 @@ dir_pin: PL1 enable_pin: !PA7 step_distance: .0125 endstop_pin: ^PB6 +#endstop_pin: ^PA2 homing_speed: 50 position_endstop: 0 position_max: 200 @@ -19,6 +20,7 @@ dir_pin: !PL0 enable_pin: !PA6 step_distance: .0125 endstop_pin: ^PB5 +#endstop_pin: ^PA1 homing_speed: 50 position_endstop: 0 position_max: 200 @@ -29,8 +31,9 @@ dir_pin: PL2 enable_pin: !PA5 step_distance: 0.00025 endstop_pin: ^PB4 +#endstop_pin: ^PC7 homing_speed: 5 -position_endstop: 0 +position_endstop: 0.5 position_max: 200 [extruder] @@ -50,6 +53,14 @@ pid_Kd: 114 min_temp: 0 max_temp: 250 +#[extruder1] +#step_pin: PC4 +#dir_pin: PL7 +#enable_pin: !PA3 +#heater_pin: PH4 +#sensor_pin: PF1 +#... + [heater_bed] heater_pin: PE5 sensor_type: EPCOS 100K B57560G104F @@ -61,6 +72,9 @@ max_temp: 130 [fan] pin: PH5 +#[heater_fan nozzle_cooling_fan] +#pin: PH3 + [mcu] serial: /dev/ttyACM0 custom: @@ -75,6 +89,8 @@ custom: set_digital_out pin=PK5 value=1 set_digital_out pin=PK3 value=1 set_digital_out pin=PK4 value=1 + #set_digital_out pin=PK2 value=1 + #set_digital_out pin=PK1 value=1 # Initialize digipot send_spi_message pin=PD7 msg=0487 # X = ~0.75A send_spi_message pin=PD7 msg=0587 # Y = ~0.75A diff --git a/config/generic-ramps.cfg b/config/generic-ramps.cfg index f5f9b268..51ad9509 100644 --- a/config/generic-ramps.cfg +++ b/config/generic-ramps.cfg @@ -10,6 +10,7 @@ dir_pin: ar55 enable_pin: !ar38 step_distance: .0125 endstop_pin: ^ar3 +#endstop_pin: ^ar2 homing_speed: 50 position_endstop: 0 position_max: 200 @@ -20,6 +21,7 @@ dir_pin: !ar61 enable_pin: !ar56 step_distance: .0125 endstop_pin: ^ar14 +#endstop_pin: ^ar15 homing_speed: 50 position_endstop: 0 position_max: 200 @@ -30,8 +32,9 @@ dir_pin: ar48 enable_pin: !ar62 step_distance: 0.00025 endstop_pin: ^ar18 +#endstop_pin: ^ar19 homing_speed: 5 -position_endstop: 0 +position_endstop: 0.5 position_max: 200 [extruder] @@ -51,6 +54,14 @@ pid_Kd: 114 min_temp: 0 max_temp: 250 +#[extruder1] +#step_pin: ar36 +#dir_pin: ar34 +#enable_pin: !ar30 +#heater_pin: ar9 +#sensor_pin: analog15 +#... + [heater_bed] heater_pin: ar8 sensor_type: EPCOS 100K B57560G104F