diff --git a/docs/Command_Templates.md b/docs/Command_Templates.md
index 57a5fa91..f2c5699b 100644
--- a/docs/Command_Templates.md
+++ b/docs/Command_Templates.md
@@ -288,6 +288,16 @@ The following are common printer attributes:
 - `printer.hall_filament_width_sensor.Diameter`,
   `printer.hall_filament_width_sensor.Raw`: The last read values from
   the sensor.
+- `printer.mcu.mcu_version`: The Klipper code version reported by the
+  micro-controller.
+- `printer.mcu.mcu_build_versions`: Information on the build tools
+  used to generate the micro-controller code (as reported by the
+  micro-controller).
+- `printer.mcu.mcu_constants.<constant_name>`: Compile time constants
+  reported by the micro-controller. The available constants may differ
+  between micro-controller architectures and with each code revision.
+- `printer.mcu.last_stats.<statistics_name>`: Statistics information
+  on the micro-controller connection.
 
 The above list is subject to change - if using an attribute be sure to
 review the [Config Changes document](Config_Changes.md) when upgrading
diff --git a/klippy/mcu.py b/klippy/mcu.py
index e9a7a74a..7032df5d 100644
--- a/klippy/mcu.py
+++ b/klippy/mcu.py
@@ -447,6 +447,7 @@ class MCU:
         self._stepqueues = []
         self._steppersync = None
         # Stats
+        self._get_status_info = {}
         self._stats_sumsq_base = 0.
         self._mcu_tick_avg = 0.
         self._mcu_tick_stddev = 0.
@@ -630,9 +631,13 @@ class MCU:
         self._reset_cmd = self.try_lookup_command("reset")
         self._config_reset_cmd = self.try_lookup_command("config_reset")
         ext_only = self._reset_cmd is None and self._config_reset_cmd is None
-        mbaud = self._serial.get_msgparser().get_constant('SERIAL_BAUD', None)
+        msgparser = self._serial.get_msgparser()
+        mbaud = msgparser.get_constant('SERIAL_BAUD', None)
         if self._restart_method is None and mbaud is None and not ext_only:
             self._restart_method = 'command'
+        self._get_status_info['mcu_version'] = msgparser.version
+        self._get_status_info['mcu_build_versions'] = msgparser.build_versions
+        self._get_status_info['mcu_constants'] = msgparser.get_constants()
         self.register_response(self._handle_shutdown, 'shutdown')
         self.register_response(self._handle_shutdown, 'is_shutdown')
         self.register_response(self._handle_mcu_stats, 'stats')
@@ -782,12 +787,17 @@ class MCU:
                      self._name, eventtime)
         self._printer.invoke_shutdown("Lost communication with MCU '%s'" % (
             self._name,))
+    def get_status(self, eventtime):
+        return dict(self._get_status_info)
     def stats(self, eventtime):
-        msg = "%s: mcu_awake=%.03f mcu_task_avg=%.06f mcu_task_stddev=%.06f" % (
-            self._name, self._mcu_tick_awake, self._mcu_tick_avg,
-            self._mcu_tick_stddev)
-        return False, ' '.join([msg, self._serial.stats(eventtime),
-                                self._clocksync.stats(eventtime)])
+        load = "mcu_awake=%.03f mcu_task_avg=%.06f mcu_task_stddev=%.06f" % (
+            self._mcu_tick_awake, self._mcu_tick_avg, self._mcu_tick_stddev)
+        stats = ' '.join([load, self._serial.stats(eventtime),
+                          self._clocksync.stats(eventtime)])
+        parts = [s.split('=', 1) for s in stats.split()]
+        last_stats = {k:(float(v) if '.' in v else int(v)) for k, v in parts}
+        self._get_status_info['last_stats'] = last_stats
+        return False, '%s: %s' % (self._name, stats)
 
 Common_MCU_errors = {
     ("Timer too close", "No next step", "Missed scheduling of next "): """