diff --git a/config/generic-ruramps-v1.3.cfg b/config/generic-ruramps-v1.3.cfg
new file mode 100644
index 00000000..f656493e
--- /dev/null
+++ b/config/generic-ruramps-v1.3.cfg
@@ -0,0 +1,86 @@
+# This file contains common pin mappings for RuRamps (v1.3) boards.  To
+# use this config, the firmware should be compiled for the Arduino
+# Due.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC5
+dir_pin: PC4
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC7
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PD10
+dir_pin: PC3
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC9
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PD9
+dir_pin: PB25
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA20
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[extruder]
+step_pin: PD6
+dir_pin: PD3
+enable_pin: !PC1
+microsteps: 16
+rotation_distance: 7.700
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB27
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA16
+control: pid
+pid_kp: 15.572
+pid_ki: 0.446
+pid_kd: 136.064
+min_extrude_temp: 160
+min_temp: 0
+max_temp: 270
+
+#[extruder1]
+#step_pin: PB26
+#dir_pin: PA15
+#enable_pin: !PD1
+
+[heater_bed]
+heater_pin: PC23
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB18
+
+#[heater_fan extruder_cooler_fan]
+#pin: PB17
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100