From 7e654aed2fbfb669bf83abbbc886c8ffa35abb6a Mon Sep 17 00:00:00 2001 From: Charles Pickering Date: Sun, 20 Mar 2022 08:16:53 -0700 Subject: [PATCH] docs: Fix config snippet for polar Previously the section for stepper_bed was intertwined with printer. This commit makes it match (../config/example-polar.cfg). Signed-off-by: Charles Pickering --- docs/Config_Reference.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index ef301a74..a0eecf01 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -468,15 +468,6 @@ position are known to not work properly. ``` [printer] kinematics: polar - -# The stepper_bed section is used to describe the stepper controlling -# the bed. -[stepper_bed] -gear_ratio: -# A gear_ratio must be specified and rotation_distance may not be -# specified. For example, if the bed has an 80 toothed pulley driven -# by a stepper with a 16 toothed pulley then one would specify a -# gear ratio of "80:16". This parameter must be provided. max_z_velocity: # This sets the maximum velocity (in mm/s) of movement along the z # axis. This setting can be used to restrict the maximum speed of @@ -487,6 +478,15 @@ max_z_accel: # the z axis. It limits the acceleration of the z stepper motor. The # default is to use max_accel for max_z_accel. +# The stepper_bed section is used to describe the stepper controlling +# the bed. +[stepper_bed] +gear_ratio: +# A gear_ratio must be specified and rotation_distance may not be +# specified. For example, if the bed has an 80 toothed pulley driven +# by a stepper with a 16 toothed pulley then one would specify a +# gear ratio of "80:16". This parameter must be provided. + # The stepper_arm section is used to describe the stepper controlling # the carriage on the arm. [stepper_arm]